• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제14권3호
• /
• pp.291-295
• /
• 2008

본 논문은 비전 시스템을 통하여 입력되어 들어오는 회전된 물체를 보정하기 위해 사용하는 선 구조 분석 도구인 라돈변환의 문제점을 해결하기 위해 입력 영상 간소화 방법을 제안한다. 먼저, 비전 시스템을 통하여 입력된 영상 내에서 불필요한 배경 부분을 제거하여 물체 영상을 추출한다. 다음, 추출된 물체 영상에 대하여 기울기를 고려하여 제한된 물체 영상만을 라돈 변환의 최종 입력 영상으로 추출한다. 마지막으로 최종 입력 영상에 대하여 라돈 변환을 사용하여 회전각을 추출한 후, 원 영상 내의 회전된 물체를 보정한다. 실험 결과, 제안한 방법은 처리 속도를 약 64% 향상시킬 수 있었고, 기억용량은 약 18% 줄일 수 있었으며, 선 검출율은 약 18%까지 향상시킬 수 있었다.

• 한국의류학회지
• /
• 제48권1호
• /
• pp.94-107
• /
• 2024

This study developed compression pants with excellent wearability and signal quality by approaching the design of wireless sEMG monitoring pants from the perspective of technical design, including the evaluation of wearability and the stable wireless transmission of signals through electrode and circuit design, and using e-textiles. An electrode, sewn with silver thread and a circuit stitched in a zigzag pattern using stainless steel wire, were applied. Additionally, polyurethane sealing tape was used to enhance adherence to the skin and reduce electrical resistance. Conductive snaps completed the design, allowing attachment and detachment to the bio-signal acquisition mainboard. Through the subjects' evaluation, it was determined that the final pants were applied with a pattern reduction rate of 25% to provide superior comfort according to different body parts while also minimizing skin irritation around the thigh circuit. The final pants for wireless sEMG monitoring, which demonstrated stable transmission of wireless measurements, was positively evaluated in terms of cognitive acceptability. This study is significant in that it achieved an optimal design by considering both technical aspects and the electrical characteristics of bio-signal monitoring garments, as well as the wearer's perception when designing smart wear.

• 방사성폐기물학회지
• /
• 제8권2호
• /
• pp.143-150
• /
• 2010

가압경수로 원전의 농축폐액건조설비에서 발생된 농축폐액 건조물을 유리화 하는 방안이 연구되어 왔다. 중저준위 방사성폐기물을 유리화할 경우 최종 생성물은 내구성이 우수하고 현저한 부피저감 효과의 장점을 가지고 있다. 붕산농축폐액에 대한 유리화 타당성 연구는 분말시료의 전처리 방법 개발, 유리조성 프로그램을 이용한 유리개발 및 실증시험으로 수행되었다. 분말시료에 대한 전처리 방안으로는 유리화설비에 투입하기 전에 고형성을 갖도록 펠렛화하는 것이다. 농축폐액 성분중 Na와 B의 함량 분포는 유리속에 용융되는 정도와 설비로부터의 폐기물 배출 처리에 영향을 주기 때문에 이를 고려하여 유리조성이 개발되어야 한다. 실증시험에서는 폐기물 투입률, 배기체 특성 및 최종 생성물인 유리고화체의 특성이 검토되었다. 본 연구는 붕산농축폐액에 대한 유리고화체의 물리화학적 특성을 검토하고 유리화 타당성을 확인하는데 목적이 있다.

• Advances in environmental research
• /
• 제3권3호
• /
• pp.199-206
• /
• 2014

Dewatering is an extremely important step in wastewater treatment process to reduce the final sludge volume in order to minimize the cost of sludge transportation and disposal. In the present study, the effect of different sludge solids content (1, 2 and 3.8%) on the dewaterability of anaerobically digested sludge using Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans was studied. The pH reduction rate was higher during initial process in the sludge having low solids content, but after 48 h of bioleaching, similar pH of below 3 was observed with all the different solids content. Bio-oxidation rate of $Fe^{2+}$ was initially higher in sludge with low solids content, but 100% $Fe^{2+}$ was oxidized within 60 h in all the three treatment levels. Compared to the control, specific resistance to filtration was reduced by 75, 78 and 80% in the sludge with a solids content of 1, 2 and 3.8% respectively, showing improvement in dewaterability with an increase in sludge solids content. Sludge effluent quality and sludge settling rate were also improved in treatments with higher solids content after the bioleaching process.

• Tribology and Lubricants
• /
• 제34권6호
• /
• pp.209-216
• /
• 2018

Sapphire is a substrate material that is widely used in optical and electronic devices. However, the processing of sapphire into a substrate takes a long time owing to its high hardness and chemical inertness. In order to process the sapphire ingot into a substrate, ingot growth, multiwire sawing, lapping, and polishing are required. The lap grinding process using pellets is known as one of the ways to improve the efficiency of sapphire substrate processing. The lap grinding process ensures high processing efficiency while utilizing two-body abrasion, unlike the lapping process which utilizes three-body abrasion by particles. However, the lap grinding process has a high material removal rate (MRR), while its weakness is in obtaining the required surface roughness for the final polishing process. In this study, we examine the effects of free abrasives in lap grinding on the material removal characteristics of sapphire substrate. Before conducting the lap grinding experiments, it was confirmed that the addition of free abrasives changed the friction force through the pin-on-disk wear test. The MRR and roughness reduction rate are experimentally studied to verify the effects of free abrasive concentration on deionized water. The addition of free abrasives (colloidal silica) in the lap grinding process can improve surface roughness by three-body abrasion along with two-body abrasion by diamond grits.

• 한국초지조사료학회지
• /
• 제11권2호
• /
• pp.97-101
• /
• 1991

This experiment was carried out to determine the effect of pure mineral nitrogen fertilization on dry matter yield and the amounts of advisable mineral nitrogen on grassland according to its age at the "Federal Institue for Agriculture in the Alps" in Austria. The results obtained were as follows: 1. With only PK-fertilizing average dry matter yields per year were progressively declined during the period of the studies. Compared with the relatively younger grassland(1st-5th year) the DM-yields were decreased by 35% in older grassland (11th-final year). 2. Due to the less reduction of DM-yields by mineral nitrogen application according to the age of grassland. With N-fertilizing the reduction of DM-yields in relatively older grassland was less than that of younger grassland by 11-21%. 3. At 4-and 5-cut systems the nitrogen amounts for the highest marginal yield(the "most efficient" Ndressing rate) per ha and year were distinctly declined in the relatively older grassland. 4. Required efficiencies of mineral nitrogen were not influenced by the age of grassland.he age of grassland.

• 한국의류학회지
• /
• 제41권6호
• /
• pp.1010-1021
• /
• 2017

Adjustment of clothing pressure for compression wear is critical to the physiological and psychological satisfaction of the wearer; however, there are limited studies on the practical relationship among extensibility of materials, pattern reduction of compression wear and resultant clothing pressure. This study provides consumers and designers with information on clothing pressure using a screening extensibility test suggested by Ziegert and Keil (1988) even for the final products. As the first step, ten commercial products were collected and their size, extensibility and corresponding clothing pressure were analyzed. It was found that clothing pressure around the waist level could be predicted well from the information of Ziegert and Keil's (1988) % extensibility of the material (Z stretch %) and the actual application of Z stretch amount to the pattern reduction rate (applied % of Z stretch), with an $r^2$ of around 0.80, especially at the waist level. However, it was not simple for the case of clothing pressure around the back of the chest level due to the various design variation and the complexity of the anatomical structure around the trapezius.

• Design & Manufacturing
• /
• 제12권2호
• /
• pp.40-45
• /
• 2018

Recently, in construction equipment machinery production, development has focused on environmentally-friendly functions to improve existing production capacity. For excavators as well, emphasis has been placed on response to environmental regulations, miniaturization, and noise reduction, while technology is being developed considering cost reduction and safety.Accordingly, the front support, an inner reinforcement part of the excavator, as well as high-strength steel plates to improve safety and reduce weight, are being applied.However, in the case of high-strength materials, Springback occurs in the final formed part due to high residual stress during product forming. Derivation of a forming or product shaping process to reduce springback is needed. Accordingly, regarding the front support, an inner reinforcement part of the excavator, this study derived a method to improve springback and secure shape stiffness through analysis of the springback occurrence rate and springback causes through a forming analysis.As for the results of analyzing the springback occurrence rate of existing products through forming analysis, springback of -22.6 mm < z < 27.35 mm occurred on the z-axis, and it was confirmed that springback occurred due to the stiffness reinforcing bead of the upper and middle parts of the product.To control product residual stress and springback, we confirmed a tendency of springback reduction through local pre-cutting and stiffness reinforcement bead relocation.In the local pre-cutting model, springback was slightly reduced by 5.3% compared with the existing model, an insignificant reduction effect. In the stiffness reinforcement bead relocation model, when an X-shaped stiffness reinforcement bead was added to each corner portion of the product, springback was reduced by at least 80%.The X-shaped bead addition model was selected as the springback reduction model, and the level of stiffness compared to the existing model was confirmed through a structural analysis.The X-shaped bead additional model showed a stress springback of 90% and springback reduction of 7.4% compared with the existing model, indicating that springback and stiffness will be reinforced.

• 자원리싸이클링
• /
• 제29권5호
• /
• pp.64-72
• /
• 2020

시멘트 산업의 질소산화물 배출량 감축을 위해 소성로에 다단연소공정을 적용할 경우, 질소산화물을 질소로 환원시키고 미연소 물질을 완전히 연소시켜 연소효율을 증대할 수 있는 산화/환원 구간이 필수적이다. 이에 본 연구에서는 시멘트 소성로 calciner에 산화/환원 구간 설정 시 최종 생산품인 시멘트 클링커의 품질안정성을 확보할 수 있는 최적 산화/환원 소성분위기를 거시적으로 관찰하고자 하였으며, 소성조건에 따른 원료물질의 질량변화, 탈탄산률, 소성완료율 등을 조사하였다. 실험결과, 대체로 환원분위기보다 산화분위기에서 원료물질의 열분해가 촉진되는 경향을 나타내며, 원료물질 자체 성분특성에 따라 비교적 CaO 함량이 높은 석회석의 열분해가 시멘트 조합원료보다 늦게 진행되는 것을 알 수 있었는데 이는 소성로 내 CO₂ 분압에 의한 현상으로 생각된다. 산화/환원 소성분위기에 따른 원료물질의 열분해 특성은 일반적인 석회석 열분해 온도보다 낮은 온도범위에서 비교적 큰 차이를 보였는데, 소성온도 750℃ 구간에 산화분위기 형성에 따라 원료물질의 열효율 향상을 기대할 수 있을 것으로 생각된다. 다만, 본 연구의 경우 실험실 규모의 연구로서 현장공정과는 차이가 있기 때문에, pilot plant 규모의 실검증결과가 필요한 것으로 판단된다.

• 소성∙가공
• /
• 제7권2호
• /
• pp.127-138
• /
• 1998

Process design of multi-step wire drawing process, conducted by means of finite element analysis and ANN(Artificial Neural Network) has been considered. The investigated problem involves the ade-quate selection of the drawing die angle and the correspondent reduction rate in the condition of desired initial and final diameter. Combinations of the process parameters which are used in finite ele-ment simulation are selected by using the orthogonal array. Also the orthogonal array. Also the orthogonal array and the results of finite element simulation which are related to the process energy are used as train data of ANN. In this study it is shown that the application of new technique using ANN and Othogonal array table to the process design of metal forming process is useful method.