• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1418-1423
• /
• 2004

Optimization of a heat exchanger with internally finned circular tubes has been performed for three-dimensional periodically fully developed turbulent flow and heat transfer. The design variables of fin number N, fin width ($d_1,d_2$) and fin height(H), are numerically optimized for the limiting conditions of $N=22{\sim}37$, $d_1=0.5{\sim}1.5$ mm, $d_2=0.5{\sim}1.5$ mm, $H=0.1{\sim}1.5$. Due to the periodic boundary conditions along main flow direction, the three layers of meshes are considered. The CFD and the mathematical optimization are coupled to optimize the heat exchanger. The flow and thermal fields are predicted using the finite volume method and the optimization is carried out by using the sequential quadratic programming (SQP) method which is widely used in the constrained nonlinear optimization problem.

• 한국항공우주학회지
• /
• 제38권4호
• /
• pp.382-388
• /
• 2010

본 논문에서는 마그네슘합금 재료로 제작된 F-5E/F의 외부 연료탱크 수평 핀의 균열 발생 원인을 분석하고 적절한 대체 재질을 검토하여 탱크의 투하 안전성을 보장하도록 핀의 형상을 재설계하였다. 재료는 재료의 성질과 조달 용이성을 고려하여 강도 및 파괴 인성이 기존재료보다 강하지만 핀 1개당 65%의 무게증가가 예상되는 알루미늄 합금 2024-T351을 선택하였다. 핀의 무게 증가로 인한 연료탱크 무게 중심의 후방 이동을 허용한계 이내로 유지하기 위하여 크기를 20% 축소하고, 두께 7 mm, 곡률 반경 8.5 mm로 설계된 핀에 대하여 정적 및 동적 응력을 해석한 결과 후방 체결부 및 체결 홀의 안전계수가 증가되었음이 확인되었다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 학술대회
• /
• pp.229-232
• /
• 2008

This study presents a numerical procedure to optimize the shape of stepped circular pin-fins to enhance turbulent heat transfer. The KRG method is used as an optimization technique with Reynolds-averaged Navier-Stokes analysis of fluid flow and heat transfer with shear stress transport turbulent model. The objective function is defined as a linear combination of heat transfer and friction loss related terms with a weighting factor. Ten training points are obtained by Latin Hypercube Sampling for two design variables. Optimum shape has been successfully obtained with the increased objective function.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년 추계학술대회논문집
• /
• pp.229-232
• /
• 2008

This study presents a numerical procedure to optimize the shape of stepped circular pin-fins to enhance turbulent heat transfer. The KRG method is used as an optimization technique with Reynolds-averaged Navier-Stokes analysis of fluid flow and heat transfer with shear stress transport turbulent model. The objective function is defined as a linear combination of heat transfer and friction loss related terms with a weighting factor. Ten training points are obtained by Latin Hypercube Sampling for two design variables. Optimum shape has been successfully obtained with the increased objective function.

• 한국자동차공학회논문집
• /
• 제17권2호
• /
• pp.159-164
• /
• 2009

Cooled EGR system is an effective method for the reduction of $NO_x$ emission and PM emission from a diesel engine. Proper choice of wavy cooling fins and gas tubes is a key factor of cooled EGR system. As a part of solutions for energy crisis and environmental problems, hybrid vehicles mounted with diesel engines are under development globally. This study investigates the cooled EGR systems for hybrid diesel engine with the specifications of both optimized wavy cooling fins and improved shape of structure to verify the heat exchange efficiency, outlet temperature and gas pressure drop of cooler by means of numerical analyses and rig performance tests. The output of this study will be applied to a 2.0L hybrid diesel engine which is being developed for domestic and overseas market.

• 한국자동차공학회논문집
• /
• 제19권1호
• /
• pp.89-94
• /
• 2011

The EGR system is one of important components in diesel engine. The regulation on NOx emission has been tightened up. Therefore, it is a significant issue to develop and commercialize the high efficient EGR cooler system that reduces NOx emission in DI diesel engine. Key performance factor of the EGR cooler system is how to properly design both wavy cooling fins and gas tubes. This paper proposes a high efficient EGR cooler that has been upgraded with both the optimized wavy cooling fins and the improved shape of structure. The evaluation of the heat exchange efficiency, outlet temperature, and gas pressure drop of the EGR cooler is performed with the prototype of the proposed EGR cooler. The result shows a good solution and will be implemented to the model of a clean diesel engine being developed for both domestic and overseas market.

• 한국태양에너지학회 논문집
• /
• 제38권2호
• /
• pp.33-43
• /
• 2018

PV/Thermal module is the combined system, which consist of a photovoltaic module and solar thermal collector that can obtain electrical power and thermal energy simultaneously. Thus the power generation can be increase by decreasing the temperature of photovoltaic module and thermal energy retrieved from module also can be used for heating system. In this study, Heat transfer performance of air type PV/Thermal module was confirmed with various bottom obstacles that can be installed easily to real photovoltaic module by CFD (computational fluid dynamics) analysis. Eight type obstacles were investigated according to the shape and arrangement. As a result, nusselt number represent heat transfer performance was increased about 86% compare with the basic type PV/Tthermal module that has no obstacle and triangle type obstacle had higher value than other types. But pressure drop was also increased with increment of heat transfer enhancement. Thus the performance factor considering both heat transfer and pressure drop was confirmed and V-fin type obstacle arranged in a row for Reynolds number below 9,600 and protrusion type obstacle arranged in zigzag for Reynolds number above 14,400 were shown higher performance factor than other types. From these results, V-fin type obstacle arranged in row and protrusion type obstacle arranged in zigzag were considered as a proper type for applying to real PV/thermal module according to operating condition. But the heat transfer performance can be changed by the geometric conditions of obstacle such as height, width, length and arrangement. Thus, it could also confirmed that the optimal condition and arrangement of this obstacle need to be found in further study.

• 대한기계학회논문집B
• /
• 제34권7호
• /
• pp.703-714
• /
• 2010

본 연구에서는 크리깅 기법을 이용하여 엇갈린 핀휜이 부착된 회전하는 내부냉각유로의 형상 최적화를 수행하였다. 냉각유로 형상의 여러 매개변수 중 핀의 지름과 높이의 비, 핀의 지름과 핀과 핀 사이의 거리의 비를 최적설계를 위한 설계변수로 선택하였다. 열전달 관련 목적함수와 마찰손실 관련 목적함수를 가중계수를 이용하여 선형적으로 결합한 목적함수를 정의하였다. 크리깅 모델을 구축하기 위해 라틴하이퍼큐브 샘플링기법에 의해 생성된 20개 실험점에서 목적함수가 SST난류모델을 사용한 삼차원 레이놀즈평균 나비어-스톡스(RANS) 유동해석법에 의해 계산되었다. 크리깅 기법을 통하여 예측된 목적함수값은 RANS해석을 이용해 계산된 값과 매우 작은 오차 범위 내에서 일치하였으며, 최적설계를 통해 목적함수가 11% 감소하는 결과를 얻었다.