• 대한기계학회논문집B
• /
• 제39권7호
• /
• pp.591-598
• /
• 2015

본 연구에서는 핀 핏치와 핀 높이가 다른 7종류의 낮은 핀관에 대하여 LiBr 농도 0%.~50%, 열유속 $20kW/m^2{\sim}40kW/m^2$, 포화압력 7.38kPa~101.3kPa에서 풀 비등 실험을 수행하였다. 실험 범위에서 최적 낮은 핀관 형상은 핀 핏치 26fpi, 핀 높이 1.8mm로 나타났다. 핀 핏치가 너무 넓으면 전열 면적이 감소하고 핀 핏치가 너무 좁으면 기포의 성장 및 이탈이 원활하지 못하게 되어 최적 핀 핏치가 존재한다. 포화압력이 낮아질수록, LiBr 농도가 증가할수록 열전달계수는 감소하였다. 이는 포화압력이 낮아질수록 기포의 이탈직경은 증가하고 이탈 빈도는 감소하기 때문이다. 또한 LiBr 농도가 증가하면 포화온도는 증가하고 물질확산율은 감소하는데 이에 따라 기포의 성장속도가 감소하고 따라서 열전달계수가 감소하게 된다. 낮은 핀관의 열전달계수는 모든 포화압력과 농도에서 평활관의 열전달계수보다 크게 나타났다. 본 실험자료를 기반으로 상관식을 제시하였다.

• 청정기술
• /
• 제14권4호
• /
• pp.265-270
• /
• 2008

본 연구는 전자기기 모듈의 공기 냉각용 정렬 배열된 핀-휜 열교환기에서 휜 형상의 변화가 유동 및 열전달에 미치는 영향을 수치적으로 해석하였다. 휜 단면의 기하학적 형상은 세 가지로서 원형, 타원형, 그리고 날개형이었다. 취급된 모든 휜의 단면적과 높이는 서로 동일하지만, 그 표면적만은 서로 달랐다. 그 결과, 휜의 표면적, 열전달계수, 그리고 열전달 성능은 휜의 형상에 크게 의존하였다. 적절한 형상을 갖는 휜의 열전달 성능은 세 가지 형태의 핀-휜 중에서 날개형 핀-휜이 가장 우수하였다. 이러한 결과로부터 공기의 유량증가측은 휜의 밀도증가 없이 적절한 핀-휜의 형상변화만으로도 핀-휜 열교환기의 냉각성능을 크게 향상 시킬 수 있음을 알 수 있었다.

• 한국재료학회지
• /
• 제14권12호
• /
• pp.870-875
• /
• 2004

Heat flow characteristics in the newly developed Wave Heat Sink were analyzed under natural and forced convections by Icepak program using the finite volume method. Temperature distribution and thermal resistance of Wave Heat Sink with/without air vent hole on the top of fin were compared with those of a commercial Al extruded heat sink(Intel Heat Sink). Under the natural convection, the maximum temperature was $45.1^{\circ}C$ in the air vent hole typed Wave Heat Sink, which was superior to that of Intel Heat Sink. The thermal resistance was $2.51^{\circ}C/W$ in the air vent hole typed Wave Heat Sink, and it changed to $2.65^{\circ}C/W\;and\;2.16^{\circ}C/W$ with changes of gravity direction and fin height, respectively. Under the forced convection, the maximum temperature became lower than that under the natural convection. In addition, the thermal resistance lowered in the air vent hole typed Wave Heat Sink with higher fin height and it decreased with increasing the air flux.

• 대한기계학회논문집B
• /
• 제26권3호
• /
• pp.417-422
• /
• 2002

The experiments have been carried out to evaluate the cooling performance of a fan-aluminum foam heat sink assembly in comparison with a conventional CPU cooler. In terms of the dimensionless surface temperature of the heater, the cooling performance of the aluminum foam heat sink is similar to that of the conventional one with much reduced weight. The optimum fin height is found to be strongly dependent on the fin height of the heat sink and flow characteristics of the cooling fan.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권7호
• /
• pp.891-898
• /
• 2011

The present work was conducted to get the best geometric information for the optimum design of the complex heat exchanger. The objective function for optimal design was expressed as a combination of pressure drop and heat transfer rate. The geometric parameters for the variables of louver pitch and height, tube width, etc., were limited to ranges set by manufacturing conditions. The optimum geometric parameters were calculated by using empirical correlations and theory. The sensitivity of the parameters and optimum values are shown and discussed. The weighting factor in the objective function is important in the selection of the louver fin-tube heat exchanger.

• 대한기계학회논문집B
• /
• 제22권6호
• /
• pp.750-756
• /
• 1998

In this study, condensation tests were conducted on a vertically finned plate (fin height 1 mm, fin thickness 1 mm, fin spacing 1 mm) using R-113. Results showed that fins enhanced the condensation on a vertical plain surface as much as four times. Comparison with theoretical models revealed that the effect off surface tension should be included in the model. The effect of interruption plates was also investigated. The plates were not effective in enhancing the finned plate condensation. The reason may be attributed to the already thinned condensate film on the finned surface.

• 수산해양교육연구
• /
• 제20권3호
• /
• pp.410-415
• /
• 2008

To evaluate the performance of nucleate boiling heat transfer between a plain and micro-fin surfaces, the experimental tests have been carried out under various conditions with fluorinert liquid FC-72, which is chemically and electrically stable. Two kinds of micro fins with the dimensions of $200{{\mu}m}{\times}20{{\mu}m}$ and $100{{\mu}m}{\times}10{{\mu}m}$ (width x height) were fabricated on the surface of a silicon chip. The experiments were performed on the liquid subcooling of 5, 10 and 20K under the atmospheric condition. The presented data showed a similar trend in the comparison with result of Rainey & You. Due to its expanded surface areas, the heat flux properties has been significantly enhanced on micro-fin surface comparing to the plain surface.

• 한국재료학회지
• /
• 제15권12호
• /
• pp.829-832
• /
• 2005

Thermal analysis of new designed heat-sink models was carried out according to the natural ana the forced convection using computational fluid dynamics(CFD). Heat resistance of wave type, top vented wave type and plate type of heat sink was compared with each other As the direction of fin and air flow are vertical(z-axis), it is shown that radiant heat performance of all of heat sinks was superior than other experimental conditions. Especially, the heat resistance of top vented wave heat sink was $0.17^{\circ}C/W$(forced convection) and $0.48^{\circ}C/W$(natural convection). The radiant heat performance of heat sink was increased with increasing the height of fin and the width of fin pitch.

• 한국발생생물학회지:발생과생식
• /
• 제17권3호
• /
• pp.257-268
• /
• 2013

Morphometric changes in the Ussurian bullhead, Leiocassis ussuriensis, and the Korean bullhead, Pseudobagrus fulvidraco, were observed during the early period of growth. Yolk length, yolk height, and yolk volume in the two species decreased within 9 days post-hatching (DPH) (p<0.05). The body lengths and body heights of both species increased gradually to 150 and 130 DPH, respectively (p<0.05). The horizontal distance between the anteriormost extension of the head and the anterior insertion of the pectoral fin, the anteriormost extension of the head ${\times}$ the verticality position of the anterior insertion of the primary dorsal fin rays, and the anterior insertion of the primary dorsal fin ${\times}$ the anterior insertion of the pectoral fin were greater in the Korean bullhead than in the Ussurian bullhead (p<0.05). However, the relative sizes of the head region, pectoral fin, ventral fin, and anal fin were greater in the Ussurian bullhead than in the Korean bullhead (p<0.05), and relative body depth and the size of the outer-mandible barbel were greater in the Korean bullhead than in the Ussurian bullhead (p<0.05). The growth curves of the morphometric characteristics of both species were divided into three types.

• 한국발생생물학회지:발생과생식
• /
• 제17권3호
• /
• pp.187-198
• /
• 2013

In this study, we measured the morphometric and histological changes in the cyprinid loach, Misgurnus anguillicaudatus, during the early period of growth. Eyes, yolk length, yolk height, and yolk volume of the larva decreased for 16 days post hatching (DPH) (P<0.05). During 60 DPH (P>0.05), the most anterior extension of the head ${\times}$ the posterior end of the supraoccipital, the most anterior extension of the head ${\times}$ the origin of the dorsal fin, the most anterior extension of the head ${\times}$ the origin of the pectoral fin, the posterior end of the supraoccipital ${\times}$ the origin of the pelvic fin, and the origin of the dorsal fin ${\times}$ the ventral origin of the caudal fin gradually decreased, whereas the most anterior extension of the head ${\times}$ the dorsal origin of the caudal fin, the origin of the dorsal fin ${\times}$ the origin of the anal fin, the origin of the dorsal fin ${\times}$ the origin of the pectoral fin, and the insertion of the dorsal fin ${\times}$ the origin of the pelvic fin gradually increased (P<0.05). In the cyprinid loach, the retina is composed of six layers: the epithelial layer, ganglion cell layer, inner nuclear layer, inner plexiform layer, outer limiting membrane, and rod and cone layer (RCL). After hatching, part of the RCL gradually increased in density. The kidney and midgut epithelium were already formed in the cyprinid loach just after hatching and grew gradually in subsequent days.