• 제목/요약/키워드: Filter strip

검색결과 98건 처리시간 0.023초

Aperture와 PBG를 적용한 대역통과 여파기 성능개선에 관한 연구 (Improvement of Band Pass Filter Using PBG and Aperture)

  • 이승재;서철헌
    • 한국통신학회논문지
    • /
    • 제28권10A호
    • /
    • pp.847-852
    • /
    • 2003
  • 본 논문에서는 접지면에 PBG 및 Aperture의 기능을 하는 셀을 에칭함으로써 PBG에의한 광대역 저지대역 여파기특성을 이용하여 본래 스트립라인이 가지고 있는 하모닉 성분(Second, Third Harmonic and etc)을 억제하였으며, Aperture 특성에 의하여 밴드폭이 넓어지는 2가지 효과를 동시에 볼 수 있는 셀을 제안하였다. 대역통과 여파기는 결합 스트립 여파기를 사용하였다[l]. 대역통과여파기의 대역폭은 신뢰할 수 있는 길이인 0.2mm를 구현할 수 있도록 맞추어 설계하여 대역폭을 가능한 넓게 만들었고 기판은 유전율이 3.2인 기판을 사용하였다. 필터의 중심주파수는 2.14GHz, 대역폭은 230MHz를 얻었다. 이를 Aperture를 통해 310MHz까지 80MHz 즉, 34.7%까지 증가시켰으며 PBG를 통하여 하모닉성분(2nd, 3rd, 4th, 5th)을 20-30dB까지 억제하였다.

2.4 GHz 대역 2012사이즈 적층 LTCC 대역통과 필터의 설계 및 제작 (A 2012 Size Multilayer LTCC BPE for 2.4 GHz Band)

  • 이영신;송희석;박종철
    • 마이크로전자및패키징학회지
    • /
    • 제10권1호
    • /
    • pp.19-24
    • /
    • 2003
  • 본 연구에서는 LTCC(Low Temperature Co-firing Ceramic) 기술을 기반으로 한 적층 공정을 이용하여 최근 시장 수요가 증가하고 있는 2.4 GHz ISM(Industrial Science and Medical) 대역의 대역통과 필터를 제작하였다. 또한 제안된 설계방식은 사이즈의 초소형 필터의 구현이 가능케 하였다. $lambda/4$ 공진기의 한쪽에 부하 캐패시터를 적절히 형성시켜 공진기의 길이를 짧게 하는 효과와 더불어 공진기의 Q값과 저지대역 감쇄특성을 향상시킬 수 있었다. 제안된 필터는 결합 스트립 공진기의 커플링 계수와 외부단자 Q(Qe)값을 요구 사양에 맞게 최적화하여 이를 3차원 구조로 설계하였다. 제작된 대역통과 필터는 시뮬레이션을 통한 설계 값과 잘 일치하는 경향성을 보여주었다.

  • PDF

고랭지밭 밀집지역 초생대의 비점오염 저감 효율 평가 - 비점오염원 관리지역을 중심으로 (만대지구, 가아지구, 자운지구) - (Efficiency Evaluation of Vegetative Filter Strip for Non-point Source Pollutant at Dense Upland Areas - Focused on Non-point Source Management Area Mandae, Gaa, and Jaun Basins -)

  • 정연지;이동준;강현우;장원석;홍지영;임경재
    • 한국농공학회논문집
    • /
    • 제64권4호
    • /
    • pp.1-10
    • /
    • 2022
  • A vegetative filter strip (VFS) is one of the best management practices (BMPs) to reduce pollutant loads. This study aims to assess the effectiveness of VFS in dense upland field areas. The study areas are agricultural fields in the Maedae (MD), Gaa (GA), and Jaun (JU) watersheds, where severe sediment yields have occurred and the Korean government has designated them as non-point management regions. The agricultural fields were divided into three or four clusters for each watershed based on their slope, slope length, and area (e.g., MD1, MD2). To assess the sediment trapping (STE) and pesticide reduction efficiency (PRE) of VFS, the Vegetative Filter Strip Modeling System (VFSMOD) was applied with three different scenarios (SC) (SC1: VFS with rye vegetation; SC2: VFS with rye vegetation and a gentle slope in VFS range; and SC3: VFS with grass mixture). For SC1, there were relatively short slope lengths and small areas in the MD1 and GA3 clusters, and they showed higher pollutant reduction (STE>50%, PRE>25%). For SC2 and SC3, all clusters in GA and some clusters (MD1 and MD3) in MD show higher pollutant reduction (>25%), while the uplands in JU still show a lower pollutant (<25%). With correlation analysis between geographic characteristics and VFS effectiveness slope and slope length showed relative higher correlations with the pollutant efficiency than a area. The results of this study implied that slope and slope length should be considered to find suitable upland conditions for VFS installations.

CCD 폭 측정 시스템 및 퍼지 PID를 이용한 CFWC 제어기 설계 (CFWC Scheme for Width Control using CCD Measurement System and Fuzzy PID Controller in Hot Strip Mills)

  • 박철재
    • 제어로봇시스템학회논문지
    • /
    • 제19권11호
    • /
    • pp.991-997
    • /
    • 2013
  • In this paper, we propose a CFWC (CCD and fuzzy PID based width control) scheme to obtain the desired delivery width margin of a vertical rolling mill in hot strip process. A WMS(width measurement system) is composed of two line scan cameras, an edge detection algorithm, a glitch filter, and so on. A dynamic model of the mill is derived from a gauge meter equation in order to design the fuzzy PID controller. The controller is a self-learning structure to select the PID gains from the error and error rate of the width margin. The effectiveness of the proposed CFWC is verified from simulation results under a width disturbance of the entry in the mill. Using a field test, we show that the performance of the width control is improved by the proposed control scheme.

A Highly Efficient Rectenna Using Harmonic Rejection Capability

  • Kim, Youg-Hwan;Lim, Sung-Joon
    • Journal of electromagnetic engineering and science
    • /
    • 제11권4호
    • /
    • pp.257-261
    • /
    • 2011
  • A highly efficient 2.4 GHz rectenna is designed using a harmonic rejection bandpass filter. The rectenna is printed on Rogers Duroid 5880 substrate with ${\varepsilon}_r$=2.2 and a thickness of 1.6 mm. The rectenna consists of a microstrip antenna and high order harmonic rejection bandpass filter, microstrip lowpass filter, and Schottky barrier diode (HSMS2820). The use of a $2^{nd}$ and $3^{rd}$ harmonic rejection microstrip bandpass filter in the rectenna results in high conversion efficiency. The proposed rectenna achieves a RF to DC conversion efficiency of 72.17 % when the received RF power is 63.09 mW.

광대역 VHF 마이크로스트립 가변대역통과 여파기의 설계 (Design of Wide Band VHF Microstrip Tunable Band-Pass Filters)

  • 박병호;정용채;윤상원;장익수
    • 전자공학회논문지A
    • /
    • 제29A권10호
    • /
    • pp.24-28
    • /
    • 1992
  • A new design method of microstrip wide band VHF tunable bandpass filters using varacter diodes is presented. In the proposed filter both the input and output ports are coupled through capacitors, and an open micro-strip line is inserted between the coupled line in order to obtain the desired degree of coupling. The optimized filter responseses for the frequency range of 220-404MHz by TOUCH-STONE are compared with the measured ones.

  • PDF

광대역 고조파 제거를 위한 고온초전도 저역통과필터의 제작 (Fabrication of high-temperature superconducting low-pass filter for broad-band harmonic rejection)

  • 한석길;강광용;안달;서준석;최춘근;김상현;곽민환
    • 한국초전도학회:학술대회논문집
    • /
    • 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
    • /
    • pp.193-196
    • /
    • 2000
  • A new type low-pass filter design method based on a coupled line and transmission line theory is proposed to suppress harmonics by attenuation poles in the stop band. The design formula are derived using the equivalent circuit of a coupled transmission line. The new low-pass filter structure is shown to have attractive properties such as compact size, wide stop band range and low insertion loss. The seventh-order low-pass filter designed by present method has a cutoff frequency of 0.9 CHz with a 0.01 dB ripple level. The coupled line type low-pass filter with strip line configuration was fabricated by using a high-temperature superconducting (HTS : YBa$_2$Cu$_3$O$_{7-{\delta}}$ thin film on MgO(100) substrate. Since the HTS coupled tine type low-pass filter was proposed with five attenuation poles in stop band such as 1.8, 2.5, 4, 5.5, 6.2 GHz. The fabricated low-pass filter has improved the attenuation characteristics up to seven times of the cutoff frequency.

  • PDF

일회용 스트립형 효소면역센서용 플랫폼의 개발 (Development of Disposable Enzyme-linked Immunosensor Strip Platform)

  • 최지혜;이승재;장승철;김경천
    • 센서학회지
    • /
    • 제20권6호
    • /
    • pp.400-405
    • /
    • 2011
  • This study introduced the development of a strip type disposable enzyme-linked immunosensor platform for the detection of IgG. Strips of the strip sensor were fabricated by using commercial nitrocellulose filter membranes and a housing holder for the strips was manufactured by using a standard injection molding process for a plastic material. An IgG-urease conjugate was prepared and used for the competitive immune-binding with sample IgG. From the enzymatic reaction between the conjugated urease and urea added, ammonia was generated and caused a localized alkaline pH change on the immobilized antibody band which was coated onto the sensor strips. This pH increase subsequently caused a color change of the antibody band in the presence of a pH indicator, phenol red. Used in conjunction with a competitive immunoassay format, the intensity of the color produced is directly linked with the concentration of target analyte, IgG, and specific measurement of IgG in a lateral flow immunoassay format was achieved over the range 100 ppb to 2000 ppb IgG.

두 층 마이크로스트립 구조를 이용한 대역통과 여파기 설계 (Design of a Bandpass Filter using Two Layer Microstrip Structure)

  • 천동완;박정훈;신철재
    • 대한전자공학회논문지TC
    • /
    • 제40권3호
    • /
    • pp.18-24
    • /
    • 2003
  • 본 논문에서는 두 층 마이크로스트립 구조를 이용한 공진기 구조를 제안하고, 이를 이용해 대역통과 여파기를 설계하였다. 제안된 공진기 구조는 첫 번째 층에 전송선로를 U자형으로 꺽은 헤어핀형태의 공진기를 위치시키고, 두 번째 층에는 첫 번째 층 전송선로의 끝 부분 바로 위에 broadside 결합구조를 위치시킨 형태이다. 이러한 구조는 일반적인 결합선로를 이용한 단일 층 여파기에 비해 설계변수가 다양하기 때문에 여파기 설계가 훨씬 수월하다. 본 논문에서는 강한 결합특성 때문에 광 대역 여파기에만 적용되어왔던 다층구조를 이용해 협 대역 여파기를 구현하였다. 중심주파수 4 ㎒, 부분대역폭 3 % 인 여파기를 구현하였으며, 제작과 측정을 통해 다층기판으로 협 대역 여파기를 구현 할 수 있음을 확인하였다.

토양여과대의 침투능 향상을 통한 비점오염물질 저감 효과에 관한 실험적 연구 (Experimental Study on Reduction Effects of Non-Point Pollutants by Improvement of Infiltration Capacity of Soil Filter Strip)

  • 우수혜;최이송;오종민
    • 생태와환경
    • /
    • 제40권2호
    • /
    • pp.264-272
    • /
    • 2007
  • 본 연구는 한강 상수원 수변지역의 실제 적용에 앞서 Bench scale의 실험을 통해 식생여과대의 단점을 보완하고 보다 효율적인 비점오염물질 저감을 위해 대조군, 모래+자갈, 여재, 자갈의 토양여과대를 조성하여 토양의 침투능력을 향상시키고 효율을 비교하고자 하였다. 실험 결과 토양여과대에서 단면 및 하부로의 침투를 증가시킨 결과 대조군과 비교하였을 때 토양여과대의 평균 표면 유출부하량과 비교하여 $8.2{\sim}40.1%$까지 감소한 것으로 나타나 토양여과대 조성을 통한 표면 유출부하량의 감소 효과가 비교적 양호하게 나타난 것으로 판단된다. 오염물질의 유입부하에 따른 총유출부하량을 통해 각각의 토양여과대에 대한 저감 효과를 비교해 본 결과, 전체적인 제거율은 SS $84.5{\sim}92.5%$, BOD $67.9{\sim}80.6%$, T-N $43.4{\sim}76.6%$), T-P $40.6{\sim}87.4%$, Cu $28.3{\sim}48.1%$, Fe $92.1{\sim}97.7%$, Pb $81.4{\sim}97.3%$인 것으로 조사되었고, 각각의 토양여과대에 대한 오염물질 저감효과를 비교해 본 결과, 여재, 모래+자갈, 자갈의 순으로 저감효과가 뛰어난 것으로 나타났다. 본 연구를 통해 기존의 식생여과대에 비해 토양층을 변화시켜 토양의 침투능을 향상시킨 토양여과대가 비점오염물질 저감에 보다 효과적이며, 하천에 가해지는 오염부하량을 감소시킬 수 있을 것으로 판단되기 때문에 차후 현장 적용 시 보다 실효성 있는 비점오염 저감대책이 될 수 있을 것으로 판단된다.