• Journal of information and communication convergence engineering
• /
• v.13 no.4
• /
• pp.264-269
• /
• 2015

The chest X-ray image cannot be focused in the same manner that optical lenses are and the resultant image generally tends to be slightly blurred. Therefore, the methods to improve the quality of chest X-ray image have been studied. In this paper, the inherent noises of the input images are suppressed by adding the Laplacian image to the original. First, the chest X-ray image using an Gaussian high pass filter and an optimal high frequency emphasis filter has shown improvements in the edges and contrast of flat areas. Second, using fuzzy logic_histogram equalization, each pixel of the chest X-ray image shows the normal distribution of intensities that are not overexposed. As a result, the proposed method has shown the enhanced edge and contrast of the images with the noise canceling effect.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.9
• /
• pp.65-71
• /
• 2004

This paper describes a new adaptive algorithm which can reduce the required computation quantities in the adaptive filter. The proposed S-LMS algorithm uses only the signs of the normalized input signal rather than the input signals when coefficients of the filter are adapted. By doing so, there is no need for the multiplications and divisions which are mostly responsible for the computation quantities. To analyze the convergence characteristics of the proposed algorithm, the condition and speed of the convergence are derived mathematically. Also, we simulate an echo canceller adopting this algorithm and compare the performances of convergence for this algorithm with the ones for the other algorithm. As the results of simulations, it is proved that the echo canceller adopting this algorithm shows almost the same performances of convergence as the echo canceller adopting the SIA algorithm.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.4_2
• /
• pp.583-591
• /
• 2020

Environmental problems have showen over the past decades due to the rapid development of the world economy and the continued growth of the population. Ocher has been widely used for water treatment research, but few studies have been conducted on adsorption of air pollutants using ocher and porous diatomite earth for indoor air purification. In this study, ocher and diatomite earth were sintered with filters to remove indoor air pollutants. The four types of TMA, H₂S, NH₃ and CH₃COOH were used to study the adsorption efficiency of ocher and porous diatomite filters. With the proper use of ocher, diatomite and copper catalysts, indoor air pollutants could be adsorbed. Alkaline substances (TMA and NH₃) and acidic substances (H₂S and CH₃COOH) were able to adsorb at 120 and 90 minutes, respectively.

• Korean Journal of Environmental Biology
• /
• v.41 no.3
• /
• pp.247-255
• /
• 2023

The occurrence of sudden strike pest events in urban areas is increasing as global warming intensifies, consequently, re causing harmful impacts. Studies on these incidents are fewer in number and insufficient compared to research on other nuisances such as mosquitoes and flies. Therefore, we conducted a study on the development of a selective collection method, using a filter layer to establish a monitoring system for Ephemera orientalis (Ephemeroptera: Ephemeridae), a species frequently identified as a sudden strike pest. Three sampling points were selected along the Hangang River in Namyangju, where E. orientalis outbreaks occur. Prototypes, consisting of four layers and with a light source attached to attract insects, were installed at each sampling point. Sampling was performed every 30 minutes between 19:00 and 22:30 in the month of June. The filter interval of each layer was adjusted so that the collected mayflies were distributed into specific layers. To evaluate the collection efficiency in line with the materials and the filter intervals, the optimal collection efficiency was investigated by combining two types of layer materials (stainless and acrylic) and filter intervals (1-5 mm). The optimal conditions were as follows: The selective collection efficiency was found to be highest at 96.5% when the interval of the selective target filter was 2.0 mm and there was one upper filter.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.9
• /
• pp.679-691
• /
• 2003

The band-width of disk drive servo system is rapidly increasing for the robustness to external disturbance as the track density is increasing. The increase of the band-width may cause mechanical resonance of an actuator. In disk drive servo system, a notch filter is usually used to suppress the mechanical resonance of the actuator. However, the resonance frequency differs from drive to drive because of manufacturing tolerance and varies with temperature even within a single drive. The variation of resonance frequency degrades the suppression performance of the notch filter. In this paper, we present an adaptive digital notch filter that identifies the resonance frequency of the disk drive servo actutaor precisely and adjusts automatically its center frequency. For this, we design an adaptive FIR digital filter for the estimation of the resonance frequency. The estimation filter identifies the resonance frequency adaptively using the output signal generated from the servo system, which is excited with an excitation signal including all the expected resonance frequency components. We prove mathematically the convergence of the resonance frequency estimation filter. Furthermore, in order to demonstrate the practical use of our work, we present some experimental results using a commercially available disk drive.

• Journal of Navigation and Port Research
• /
• v.37 no.5
• /
• pp.447-452
• /
• 2013

Vessel traffic system uses multiple sea surveillance radars as a primary sensor to obtain maritime traffic information like as ship's position, speed, course. The systematic errors such as the range bias and the azimuth bias of the two-dimensional radar system can significantly degrade the accuracy of the radar image and target tracking information. Therefore, the systematic errors of the radar system should be corrected precisely in order to provide the accurate target information in the vessel traffic system. In this paper, it is proposed that the method compensates the range bias and the azimuth bias using AtoN information installed at VTS coverage. The radar measurement residual error model is derived from the standard error model of two-dimensional radar measurements and the position information of AtoN, and then the linear Kalman filter is designed for estimation of the systematic errors of the radar system. The proposed method is validated via Monte-Carlo runs. Also, the convergence characteristics of the designed filter and the accuracy of the systematic error estimates according to the number of AtoN information are analyzed.

• Journal of information and communication convergence engineering
• /
• v.8 no.6
• /
• pp.645-650
• /
• 2010

In this paper, we present the effect of binocular cues which plays crucial role for the visualization of a stereoscopic or 3D image. This study is useful in extracting depth and disparity information by image processing technique. A linear relation between the object distance and the image distance is presented to discuss the cause of cybersickness. In the experimental results, three dimensional view of the depth map between the 2D images is shown. A median filter is used to reduce the noises available in the disparity map image. After the median filter, two filter algorithms such as 'Gabor' filter and 'Canny' filter are tested for disparity visualization between two images. The 'Gabor' filter is to estimate the disparity by texture extraction and discrimination methods of the two images, and the 'Canny' filter is used to visualize the disparity by edge detection of the two color images obtained from stereoscopic cameras. The 'Canny' filter is better choice for estimating the disparity rather than the 'Gabor' filter because the 'Canny' filter is much more efficient than 'Gabor' filter in terms of detecting the edges. 'Canny' filter changes the color images directly into color edges without converting them into the grayscale. As a result, more clear edges of the stereo images as compared to the edge detection by 'Gabor' filter can be obtained. Since the main goal of the research is to estimate the horizontal disparity of all possible regions or edges of the images, thus the 'Canny' filter is proposed for decipherable visualization of the disparity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3C
• /
• pp.141-146
• /
• 2005

The authors investigate the convergence speed problem of nonlinear adaptive equalization. Convergence constraints and time constant of radial basis function network using stochastic gradient (RBF-SG) algorithm is analyzed and a method of making time constant independent of hidden-node output power by using sample-by-sample node output power estimation is derived. The method for estimating the node power is to use a single-pole low-pass filter. It is shown by simulation that the proposed algorithm gives faster convergence and lower minimum MSE than the RBF-SG algorithm.

• Bulletin of the Korean Mathematical Society
• /
• v.45 no.2
• /
• pp.207-220
• /
• 2008

We introduce and study the notions of supra fuzzy convergence of fuzzy filters, $s{\gamma}$-fuzzy open (closed) sets, $s{\gamma}(/TEX>$s{\gamma}^*)$-fuzzy continuous and $s{\gamma}$-fuzzy open mapping. Also. we investigate some of fundamental properties of these notions.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.8
• /
• pp.616-625
• /
• 2002

In this paper, we drove the filtered-x least mean fourth (FXLMF) algorithm where the error raised to the power of four is minimized and analyzed its convergence behavior for a multiple sinusoidal acoustic noise and Gaussian measurement noise. The application of the FXLMF adaptive filter to active noise control requires to estimate the transfer characteristics of the acoustic path between the output and the error signal of the adaptive controller. The results of the convergence analysis of the FXLMF algorithm indicate that the effects of the parameter estimation inaccuracy on the convergence behavior of the algorithm are characterized by two distinct components phase estimation error and estimated gain. In particular, the convergence is shown to be strongly affected by the accuracy of the phase response estimate. Also, we newly show that the convergence behavior can differ depending on the relative sizes of the Gaussian noise and the convergence constant.