• Journal of Korea Society of Digital Industry and Information Management
• /
• v.12 no.3
• /
• pp.55-64
• /
• 2016

Recently, unmanned aerial vehicle, also known as drone is being used in variety of areas. Previously drones are used as military purposes. After unmanned technology went abroad to civil, drones are used as multipurpose such as hobby, business and other more. Even though drones are very useful in many areas, problems such as safety and personal privacy infringement raised new social issues. In this thesis it will analyze and suggest solutions to the social problems of personal privacy infringement which occurred by drone filming. This thesis will also suggest that new law of drone safety must legislate quickly. Drone is exploration of new filed. Varies of new technology help to grow drone industries. Drone is able to complete tasks which are impossible or very difficult to do. To constantly grow drone industries, people must have solutions for problems of drone. If people can figure out solutions problem of drone which introduced by this thesis, value of drone will grow even more.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.4
• /
• pp.16-21
• /
• 2002

It was observed that drying temperature and curing time in the paper coating process as well as Tg of the latex used as a binder, greatly affected the properties of the coated paper such as roughness, paper and print gloss, K & N ink drop, and ink set-off. The higher drying temperature induced faster water evaporation and change in binding density, which caused an increase in paper roughness, ink gloss and ink set-off, but decrease in paper gloss and K & N ink drop. The increased curing time promoted latex filming and redistribution of the binder in coating layer. This increased pick strength and ink gloss, but decreased ink trapping. Finally, the higher Tg of the latex showed the wider changing range of these properties.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.866-868
• /
• 1998

Room temperature vulcanizing(RTV)silicone rubber has been widely used to coat porcelain insulators to render water repellency to prevent formation of water filming on the surface and thus to suppress the leakage current and consequent flashover. However, the electrical property and its hydrophobicity of RTV silicone rubber coating under outdoor conditions may be influenced by many environmental factors. In this study various treatments, such as salt-fog, salt water immerging and UV irradiation were applied to samples for investigation the change of the electrical property and hydrophobicity. As a result the leakage current increased and contact angle decreased as the degradation time longer. But the degraded RTV silicone rubber has recovered its hydrophobicity during the drying time in ambient condition because LMW(Low Molecular Weight)silicone fluid diffused from the bulk to the surface.

• Electronics and Telecommunications Trends
• /
• v.33 no.4
• /
• pp.70-80
• /
• 2018

Drones are now widely used in civilian applications such as filming, leisure, agricultural control, monitoring, and the generation of 3D-spatial information, deviating only from military drones. In the field of logistics, prototypes are emerging in the area of logistics transportation, and to develop a future transportation service under the name of a drone tax, each country is introducing its first flight results using its own unique drones. In this paper, we review the domestic and overseas trends of drone delivery service technology, which requires various capabilities such as automatic flight, and review the related core technologies. We then propose the flight capability and road map of a drone delivery service according to the detailed conditions such as the flight area, visibility, and flight method. Additionally, in connection with the postal processing of the Korea Post Office, which would be a main demand for this type of service, we describe a method for realizing a drone delivery service based on the structure, scenario, and deployment of the drone delivery system.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.10a
• /
• pp.6-6
• /
• 1998

항공기용 가스터빈 및 일반적인 산업용 분무시스템에서는 많은 양의 분사액체를 미립화 시키고 시스템의 연속적인 운전과 유지를 편리하게 하기 위하여 여러 개의 분사노즐을 열로 설치하여 동시에 분사하도록 하고 있다. 이렇게 동시에 분사할 경우, 노즐간에 거리가 충분히 크지 않으면 개별적으로 분사된 분무들이 서로 합해져서 하나의 연합된 분무군이 형성된다. 이렇게 Two element에 의해서 형성된 spray는 공급압력이 증가함에 따라 관성력이 증가하게 되어 중심부분에서 액막 혹은 액적상태로서 충돌이 발생하여 복잡한 분무특성을 가질 것이다. 따라서, 연합된 분무군의 특성을 이해하는 것은 응용의 측면에서 매우 중요하다고 할 수 있다.

• The Journal of the Korean dental association
• /
• v.18 no.2 s.131
• /
• pp.103-108
• /
• 1980

The occurrence of odontogenic epithelium in the well of a dentigerous cyst is a well known entity. This epithelium usually remains inactive and does not have clinical significance. However, these small inactive islands of epithelium may be stimulated, resulting in an ameloblastoma. Therefore correct diagnosis and proper treatment are very important. A 15 year-old boy came to the outpatient clinic on August 13, 1979. The Chief complaint was pain, difficulty in mouth opening and swelling of the right mandible of 1 month's durations. With the X-ray filming, it was revealed that dentigerous cyst had been originated from the third molar, occurred in posterior region of the right mandible involving the 1st and the and molar and the portion just beneath the sigmoid notch area. Pus discharged from the gingival sulcus distal to the 2nd molar and it was sure that the cyst had been infected. Enucleation performed with careful excision of all cyst wall was successfully carried out, and recovery and heading were rapid and uncomplicated.

• The Korean Journal of Community Living Science
• /
• v.14 no.3
• /
• pp.3-11
• /
• 2003

The objectives of the study were to analyze the current conditions of the“NONGCHON ILGAM GATCI”project (an income generating project for rural areas) and to suggest possible improvements. Among the 567 business which have been supported by the project, implemented in 1990 by the Department of Rural-Home-Improvement of the Rural Development Administration, 361 (63.7%) can be categorized as being in the self-supporting stage. Another 126 (22.2%) can be said to be in the incubation stage. Data for the case study was collected from 20 project sites. The“NONGCHON ILGAM GATCI”project has been progressing successfully when compared with other rural development projects. However, there are still some problems. Among the problems are the lack of a business mindset and management abilities in individuals, and the fact that the businesses and their products are not well hewn on the market. To remedy these problems, education toward improving business and management skills, a unified public relations system, and institutional support from the government are greatly needed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2001.11a
• /
• pp.50-53
• /
• 2001

Flame propagation during the initial stages of ignition in a non-premixed swirl, having some of characteristics of the primary zone of an aero gas turbine combustor, has been investigated. Nd:YAG laser was adopted as the principal ignition source to allow arbitrary placing of the ignition site i subsequent flame development was monitored using a natural light high speed filming technique for many ignition site at two different swirl ratios and an overall equivalence ratio of 0.9. For ignition offset from the burner centreline, buoyancy force associated with radial pressure gradient produced a strong inward movement of the flame kernel. At the burner exit. flame kernels invariably developed into cylindrical form and a 'radial confinement /axia expansion' (RCAE) process was observed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.12
• /
• pp.797-801
• /
• 2015

In this study ensuring a filming technology is attempted through dispersion technologies and mixing polymer scaffolds in order to produce films based on the nanowaires obtained from chitin. In addition this study proposes technologies in measuring and improving characteristics of films produced using nanowires and for applying electric conductivity to the films as a chemical and physical manner. Also, a possibility in applications of mass productive films or substrates to producing flexible and transparent films is proposed. In the experiment implemented in this study, it is verified that developments of high strength, high transparency, and high flexibility films can be developed through combining it with producing flexible and transparent films.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.27-27
• /
• 1998

연구소기내에서 원활한 연소를 위하여 액체의 균일하고 완전한 미소분열 문제는 매우 중요한 연구분야라 할 수 있으며, 특히 항공기용 가스터빈 연소기에 사용되는 분사 시스템의 설계시에는 단순한 미소분열 문제뿐 아니라 시동성 향상, 화염의 안정화, 공해물질의 저감 등은 물론 압력 차가 작고 유량범위가 넓으며 공기를 이용한 미립화(Atomization)의 효율이 낮은 영역, 즉, 시동(Start-up) 및 플레임 아웃(Flame-out)근처의 영역에서도 효율적인 미립화가 이루어지도록 고려되어져야 한다.