• Journal of Electrochemical Science and Technology
• /
• 제1권1호
• /
• pp.45-49
• /
• 2010

$Li_2PtO_3$ thin film electrodes, which might be possible candidate for the cathode materials for implantable batteries, were synthesized using an electrostatic spray deposition (ESD) technique onto a platinum foil substrate. Single phase $Li_2PtO_3$with a structure similar to layered $LiCoO_2$ structure were synthesized by spraying a precursor solution of $CH_3CO_2Li2H_2O$ in ethanol onto a Pt substrate at temperatures ranging from 200 to $400^{\circ}C$ followed by annealing at above $600^{\circ}C$. Lithium carbonate was the only major phase at temperatures up to $500^{\circ}C$. The X-ray diffraction (XRD) peaks of the Pt foil substrate and lithium carbonate disappeared at temperatures >$600^{\circ}C$. The volumetric capacity of the $Li_2PtO_3$ thin film synthesized using the ESD technique was approximately 817 mAh/$cm^3$, which exceeded that of $LiCoO_2$ (711 mAh/$cm^3$).

• 한국항공우주학회지
• /
• 제34권2호
• /
• pp.75-81
• /
• 2006

로켓엔진에서 선형 연소 안정한계에 미치는 유한화학반응의 열적 효과와 막냉각 효과를 조사하였다. 안정한계를 평가하기위해 3차원 연소실에서 유한화학반응을 채택한 반응 유동장 계산으로부터 구한 유동변수들을 사용하였다. 주요 유동변수들의 값은 유한화학반응 모델의 채택으로 인해 상당히 달라졌으며 결과적으로 안정한계도 수정되었다. 유한화학반응은 열적 관점에서 안정성 향상에 기여함을 알았다. 또한 막냉각을 한 경우, 안정성 경향이 향상됨을 알 수 있었다.

• 한국표면공학회지
• /
• 제43권2호
• /
• pp.47-50
• /
• 2010

This work discusses a two-step electroless plating method for preparing a Pt thin film on p-type InGaAs substrate, which is defined as Pt I and Pt II. A thin Pt catalytic layer formed in Pt I bath on the substrate at $65^{\circ}C$. In the following Pt II bath, thick Pt films then easily grew on the sensitized layer on InGaAs previously formed in the Pt I bath. The growth of Pt film is strongly influenced by the plating temperature and pH value. To study the plating time effect, the plating of Pt II bath is 5 to 40 min at $80^{\circ}C$ after using Pt I bath at 50~$65^{\circ}C$ for 5min of pH 8~13. Pt film for ohmic contact to p-type InGaAs was successfully prepared by using the two-step Pt electroless plating.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.449-449
• /
• 2007

OLED has many advantages of low voltage operation, self radiation, light weight, thin thickness, wide view angle and fast response time to overcome existing liquid crystal display (LCD)'s weakness. Therefore, It draws attention as promising display and has already developed for manufactured goods. Also, OLED is regarded as a only substitute of flexible display with a thin display. A considerable portion of the light originating film emissive centers buried in a solid film never escapes due to internal reflection at the air-film interface and is scattered as edge emission or dissipated within the solid film This is one of the major reasons why the luminous power efficiency of OLED remains low, in spite of research progress in OLED. Although several ways of overcoming this difficulty have been reported, no comprehensive method has been proposed yet. In this paper, we propose that use of anti-reflective coating layers.

• Tribology and Lubricants
• /
• 제25권1호
• /
• pp.1-6
• /
• 2009

In this paper, the minimum oil film thickness and the maximum oil film pressure of engine bearings have been analyzed by using the elastohydrodynamic theory and Taguchi's design method as functions of the oil groove width, oil hole diameter, oil hole position, and oil supply pressure. The optimized design of the engine bearing f3r an automotive Diesel engine is very important for supporting a load-carrying capacity due to gas pres-sures from the engine combustion chamber and inertia forces of the piston. The optimized design data of engine bearings indicated that the optimized oil groove width and an oil diameter of a engine bearing are 8mm at the speed of 2,000 rpm for a given 4-cylinder Diesel engine. Thus, the oil groove oil groove and an oil hole for high performances of an engine bearing may be considered as major design parameters compared to other design factors, which are strongly related to the minimum oil film thickness and the maximum oil pressure distribution of the engine oil.

• Journal of Multimedia Information System
• /
• 제8권4호
• /
• pp.277-284
• /
• 2021

Despite skepticism about commercial potential, the stereoscopic 3D cinema is still a form that any filmmaker can choose to employ for its aesthetics and its immersive potential. Based on a haptic illusion, the stereoscopic media content requires a new perspective different from the principle of 2D media content in terms of creation and acceptance. This paper examines the technical and aesthetic issues of stereoscopic 3D film production from the perspective of today's emerging realistic and immersive media through a case study. One of the key factors for successful content creation and research and development in stereoscopic 3D cinema is the combination of artistic principles together with technical mastering of the new image technology. The purpose of this paper is to outline the principal challenges and research topics in stereoscopic 3D cinema through a case study of stereoscopic 3D pilot film production for the 'User-Selective UHD Stereoscopic Media Service Platform' of the ETRI (Electronics and Telecommunications Research Institute). This paper intends to examine stereoscopic 3D filmmaking workflow and production methodologies, as well as technical elements and aesthetic issues.

• 대한방사선협회지
• /
• 제25권1호
• /
• pp.24-24
• /
• 1999

In order to establish reasonable concept and background on repititive films, we analyzed factors due to wasted films grouping into three major factors as 1) artificial factor from exposure and positioning. 2) mechanical factor as mechanic error and jammin

• International Journal of Advanced Culture Technology
• /
• 제12권3호
• /
• pp.370-379
• /
• 2024

In this paper, we explore the historical development and revolutionary impact of music in mass media across various forms, including radio, television, film, and digital platforms. The evolution of music in mass media reflects significant technological and cultural shifts over the past century. From the early days of radio to the advent of digital streaming, music has played a crucial role in shaping the types of mass media. Early radio broadcasts in the 1920s relied on live performances and recordings to captivate audiences, establishing music as a central element of media content. The rise of television in the 1950s brought new opportunities for music integration, with theme songs, variety shows, and music videos becoming staples of TV programming. The film industry further revolutionized the use of music, with iconic scores enhancing cinematic storytelling and emotional depth. The digital revolution of the late 20th century introduced new formats and services, expanding access to music and transforming consumption patterns. Recently, streaming platforms and social media allow for personalized music experiences and direct artist-fan interactions. Through an analysis of technological advancements, this study highlights the integral role of music in enhancing narrative, evoking emotions, and creating cultural identities. We present our understanding of this evolution to provide insights into future trends and potential innovations in the integration of music with mass media, including the use of artificial intelligence and virtual reality to create immersive auditory experiences.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.416-416
• /
• 2016

Organic-inorganic metal halide perovskite solar cells have received attention because it has a number of advantages with excellent light harvesting, high carrier mobility, and facile solution processability and also recorded recently power conversion efficiency (PCEs) of over 20%. The major issue on perovskite solar cells have been reached the limit of small area laboratory scale devices produced using fabrication techniques such as spin coating and physical vapor deposition which are incompatible with low-cost and large area fabrication of perovskite solar cells using printing and coating techniques. To solution these problems, we have investigated the feasibility of achieving fully printable perovskite solar cells by the blade-coating technique. The blade-coating fabrication has been widely used to fabricate organic solar cells (OSCs) and is proven to be a simple, environment-friendly, and low-cost method for the solution-processed photovoltaic. Moreover, the film morphology control in the blade-coating method is much easier than the spray coating and roll-to-roll printing; high-quality photoactive layers with controllable thickness can be performed by using a precisely polished blade with low surface roughness and coating gap control between blade and coating substrate[1]. In order to fabricate perovskite devices with good efficiency, one of the main factors in printed electronic processing is the fabrication of thin films with controlled morphology, high surface coverage and minimum pinholes for high performance, printed thin film perovskite solar cells. Charge dissociation efficiency, charge transport and diffusion length of charge species are dependent on the crystallinity of the film [2]. We fabricated the printed perovskite solar cells with large area and flexible by the bar-coating. The morphology of printed film could be closely related with the condition of the bar-coating technique such as coating speed, concentration and amount of solution, drying condition, and suitable film thickness was also studied by using the optical analysis with SEM. Electrical performance of printed devices is gives hysteresis and efficiency distribution.

• 대한방사선기술학회지:방사선기술과학
• /
• 제16권1호
• /
• pp.67-80
• /
• 1993

Recently, a large number of new screen-film systems have become available for use in diagnostic radiology. These new screens are made of materials generally known as rare-earth phosphors which have high x-ray absorption and high x-ray to light conversion efficiency compared to calcium tungstate phosphors. The major advantage of these new systesms is reduction of patient exposure due to their high speed or high sensitivity. However, a system with excessively high speed can result in a significant degradation of radiographic image quality. Therefore, th speed is important parameters for users of these system. Our aim of in this was to determine accurately and precisely the absolute speed and relative speeds of both new and conventional screen-film system. We determined the absolute speed in condition of BRH phantom beam qulity and the relative speed were measured by a split-screen technique in condition of BRH and ANSI phantom beam qulity. The absolute and the relative speed were determined for 8 kinds of screen-4 kinds of film in regular system and 7 kinds of screen-7 kinds of film in ortho system. In this study we could know the New Rx, T-MAT G has the highest film speed, also know Green system's stndard deviation of relative speed larger than blue system. It was realized that there were no relationship between the absolute speed and the blue system. It was realized that there were no relationship between the absolute speed and the relative speed in ortho or regular system.