• 에너지공학
• /
• 제14권3호
• /
• pp.194-202
• /
• 2005

본 연구는 다양한 수직 액막형 흡수기에서 열 및 물질전달 과정에 따른 흡수 특성 예측을 이론 및 실험적으로 수행하였다. 열 및 물질전달 향상은 해석적으로 조사되었으며, 흡수 성능에 대한 유동 형태, 삽입기구 및 주름에 의한 형상 변수의 영향 등을 조사하였다. 특히, 최대 흡수 성능에 대한 동적 변수(수용액 유량, 유동형태)와 흡수기 형상(ID=22.8mm, L=1150m)의 최적값을 수치 해석적으로 예측하였다 수치 해석 및 실험에서 최대 흡수 성능은 삽입기구(스프링)에 의한 파동 유동에서 나타났다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제13권2호
• /
• pp.64-77
• /
• 1989

In this study, the experiments were carried out for the purpose of establishment of aluminium cementation to steel surface by diffusible heat treatment after making the coated film onto the substrate by arc spray method. Also, the microstructure and mechanical properties of the cementation layer produced by this study were inspected for various heat treatment and spraying conditions. Main results obtained are as follow ; 1. The coating film characteristics which have excellent errosion-resistance, high temperature oxidation-resistance are obtained by aluminium penetration heat treatment after making the sprayed aluminum coating film onto the steel substrate. 2. Aluminium diffusion penetration takes place at higher temperature than 660.deg.C, and the more heat treatment time and the higher heat treatment temperature adopted, the deeper diffusion layer obtained. 3. Insert gas arc spraying using argon gas as the carrier gas higher improvement of mechanical property than that of compressed air environment. 4. The coating film characteristics appeared to be improvement of adhesive property, porosity plugging effect by heat treatment in air environment.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제14권2호
• /
• pp.41-48
• /
• 2006

Absorption performance at the vertical interface between refrigerant vapor and liquid solution of $LiBr-H_{2}O$ solution was enhanced by the waves formed due to the interfacial shear stress. The present study investigated experimentally and analytically the improvements of absorption performance in a falling film by wavy film flow. The dynamic parameter was the film Reynolds numbers ranged from 50 to 150. The energy and diffusion equations were solved simultaneously to find the temperature and concentration profiles at the interface of liquid solution and refrigerant vapor. Absorption characteristics due to heat and mass transfer were analyzed for the falling film of the LiBr aqueous solution contacted by refrigerant vapor in the absorber. Absorption performance showed a peak value at the solution flow rate of $Re_{f}>100$. Absorption performance for the wavy film flow was found to be greater by approximately 10% than that for uniform film flow. Based on numerical and experimental results, the maximum absorption rate was obtained for the wavy flow caused by spring insert. The difference between the measured and the predicted results were ranged from 5.8 to 12%.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.388-392
• /
• 2003

As the machine tool industry progresses, the performance of cutting tools also needs to be of good quality and specialized. If the existing metal cutting tool tip is coated properly, its life would be longer and the machining of a difficult-to-cut material also could be possible. For the development of the high quality cutting tool, the applicabilities of TiAIN coating deposited by PVD on the cutting insert were experimentally investigated. The various measurements, such as, SEM micrograph, XRD pattern, AFM surface morphology, and hardness were performed to cross-check the possibility and availability of TiAIN coated tool in the field. The effects of it is successful and we hope to see good results in many fields.

• Design & Manufacturing
• /
• 제2권2호
• /
• pp.29-32
• /
• 2008

A back light unit (BLU) is a key module of a thin film transistor liquid crystal display (TFT-LCD), frequently utilized in various mobile displays. In this study, we experimentally characterize transcription and optical properties of concave and convex microlens arrays (MLAs) of light guide plate (LGP) fabricated by injection molding with polycarbonate as a LGP substrate material. Nickel mold inserts were manufactured by electroforming on the MLA which was fabricated by the thermal reflow of photoresist microstructures patterned by UV-photolithography. For the case of convex microlens, the height of replicated microlens was less than that of the mold insert while maintaining almost the same microlens diameter of the mold insert as the location of the microlens is far from the gate. In contrast, for the concave microlens, the diameter of replicated microlens was larger than that of mold insert, while showing almost the same microlens height as the mold insert. From the optical examination of replicated convex and concave MLAs, it was found that a higher luminance of the LGP was achieved by the concave MLAs compared to the convex MLAs (about 30% enhancement in this case)due to the utilization of a larger amount of light provided by the light sources.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.217-220
• /
• 2003

This paper presents a wavelet-based digital watermarking scheme for color images. We insert watermarks in the DWI domain using spread-spectrum correlation-based watermarking in luminance component of the color image. The watermark, two pseudorandom patterns, is inserted by modifying the wavelet coefficients at subband HL2, LH2, HH2 according to message bits. To detect watermark, we calculate the correlation between the watermarked image and pseudorandom patterns. As compared with correlations, the watermark detector determines embedding message. Experimental results show that the scheme is not only invisible but also robust to various attacks such as JPEG compression, noise addition and so on.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 춘계종합학술대회 A
• /
• pp.59-62
• /
• 2008

In this paper, we study ZnO-based a film bulk acoustic resonator (FBAR) using a multi-layered Bragg reflector. We insert chromium adhesion layers of 0.03 mm-thick to the Bragg reflector and improve the performance using thermal treatments. At operating frequency about 2.5 GHz, excellent resonance characteristics are observed in terms of good return loss and high quality factor.

• 설비공학논문집
• /
• 제17권9호
• /
• pp.830-838
• /
• 2005

The present study investigated the optimization of the absorption performance of the vertical absorber tube with falling film by considering heat and mass transfer simultaneously. Effects of film Reynolds number, geometric parameters by insert device (spring) and flow pattern on heat and mass transfer performances have been also investigated. Especially, effects of coolant flow rate and the flow pattern by geometric parameters has been observed for the total heat and mass transfer rates through both numerical and experimental studies. Based on both predicted values, the optimal coolant flow rate was predicted as 1.98 L/min. The maximum absorption rate of the spring inserted tube was increased by the maximum of $20.0\%$ than those for uniform film of bare tube. Average Sherwood numbers and Nusselt numbers were increased as Reynolds numbers increased under the dynamic and geometric conditions showing the maximum absorption performance.

• 센서학회지
• /
• 제19권3호
• /
• pp.202-208
• /
• 2010

This study examined the dependency of crystalline orientation and electric properties of sol-gel PZT film on hydrolysis, a $PbTiO_3$ seed layer and a concentration of sol-gel solution. The PZT thin films were prepared by using 2-Methoxyethanol-based sol-gel method and spin-coating on Pt/Ti/$SiO_2$/Si substrates. The 1-${\mu}m$-thick PZT films were coated and then fired in a furnace by direct insert method. The highly (111) oriented PZT film of pure perovskite structure could be obtained. We could control the degree of orientation by various parameters such as hydrolysis, a $PbTiO_3$ seed layer and a concentration of sol-gel solution. The highest measured remanent polarization, dielectric constant and piezoelectric coefficient are $24.16\;{\mu}C/cm^2$, 2808, and 159 pC/N, respectively.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2006년도 춘계 종합학술대회 논문집
• /
• pp.279-284
• /
• 2006

미디어의 발달로 표현의 영역이 넓어진 영화 예술분야도 급속도로 성장해 왔다. 최근 한국 영화에서도 특수 효과(SFX)의 하나인 컴퓨터 그래픽스(CG)를 이용한 디지털 영화에 관심과 인력이 형성되고 있다. 본 논문에서는 형태가 갖는 게슈탈트 이론에 근거하여 한국 영화에서 3D 애니메이션이 삽입되어 2005년 최고의 흥행을 이루었던 <웰컴투 동막골>을 중심으로 그 조형성을 고찰하였다. 그 결과, 3D 애니메이션을 영화에 삽입함으로써 제작자의 의도에 따라 실사에서 느낄 수 없는 환영성이나 가상적인 세계를 이끌어 갈 수도 있으며 이는 촬영상의 공간의 제약을 받지 않는 자유로운 공간성이 적용되었음을 확인하였다. 또한, 지각의 대상에 전체성을 부여하며 완결을 필요로 하는 게슈탈트 이론에 의해 부분적인 애니메이션의 설정일지라도 영화의 의미를 파악하고 이해할 수 있는 역할을 할 수 있다는 것을 알 수 있었다.