• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.283-284
• /
• 2010

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.3
• /
• pp.110-114
• /
• 2011

Polymeric films of high chemical stability and mechanical strength covered with a thin metallic film have been extensively used in various fields as electric and electronic materials. In this study, we have chosen polypropylene (PP) as the polymer due to its outstanding chemical resistance and good creep resistance. We coated thin nickel film on PP films by the electroless plating process. The surfaces of PP films were pre-treated and modified to increase the adhesion strength of metal layer on PP films, prior to the plating process, by an environment-friendly process with atmospheric plasma generated using dielectric barrier discharges in air. The surface morphologies of the PP films were observed before and after the surface modification process using a scanning electron microscope (SEM). The static contact angles were measured with deionized water droplets. The cross-sectional images of the PP films coated with thin metal film were taken with SEM to see the combined state between metallic and PP films. The adhesion strength of the metallic thin films on the PP films was confirmed by the thermal shock test and the cross-cutting and peel test. In conclusion, we made a composite material of metallic and polymeric films of high adhesion strength.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.1
• /
• pp.35-38
• /
• 2002

Ferrite thin film with glass substrate was prepared by ferrite plating method in order to make sunglass which cut off ultraviolet and electromagnetic field. It has single phase of polycrystalline spinel structure and has gloss like as mirror and has hardness without scratch by scraping with nail. The transmittance of ferrite thin film is lowered near 400nm manifestly, which shows that the ferrite thin film was cut off ultraviolet successfully. Therefore, the sunglass with ferrite plating is use of cut of ultraviolet and electromagnetic field.

• The Journal of Natural Sciences
• /
• v.6 no.1
• /
• pp.55-64
• /
• 1993

Experiments were conducted to study the effect of auxins and cultural factors on rooting characteristics in offshoots cutting of Aloe vera. The result obtained were as follows;1. Short offshoots(15-20cm) with rhizome had more roots than that of the removed rhizome, while long offshoots(25-30cm) without rhizome had more roots and heavier root dry weight than short offshoots with rhizome. The highest rooting ability occured when IBA treated 500mg per liter in short offshoots with rhizome, whereas long offshoots without rhizome showed higher rooting ability at the level of 1,000mg/l of IBA and 200mg/I of NAA2. Among three kinds of anxin treated, both IBA and NAA showed better rooting ability than ethychlozate. Root number, root length and root dry weight were higher at 10 min. dipping treatment of IBA 500mg/I for short off-shoots without rhizome and 10 min. dipping treatment of IBA 1,000mg/l for long offshoots with rhizome. Rooting ability of long offshoots was higher than that of short offshoots.3. In addition to IBA 1,000mg/l, 7-day dryness under shading condition increased root number and dry weight of root in offshoots without rhizome. Control treatment lengthened root by increasing drying period under the shading condition.4. The plain soil with mamure had not only higher root dofferentiation but higher root growth of offshoots cutting than the artificial soil.5. Rooting ability in offshoots cutting had a tendency increasing with decrease in shading percentage to natural. Black color poly ethylene film mulching had better rooting ablility than transparency poly ethlene film mulching in offshoots cutting.

• Korea-Australia Rheology Journal
• /
• v.19 no.3
• /
• pp.171-176
• /
• 2007

LCD-BLU (Liquid Crystal Display-Back Light Unit) of medium size is usually manufactured by forming numerous dots with $50{\sim}300\;{\mu}m$ in diameter by etching process and V-grove shape with $50\;{\mu}m$ in height by mechanical cutting process. However, the surface of the etched dots is very rough due to the characteristics of the etching process and V-cutting needs rather high cost. Instead of existing optical pattern made by etching and mechanical cutting, 3-dimensional continuous micro-lens of $200\;{\mu}m$ in diameter was applied in the present study. The continuous micro-lens pattern fabricated by modified LIGA with thermal reflow process was tested to this new optical design of LGP. The manufacturing process using LIGA-reflow is made up of three stages as follows: (i) the stage of lithography, (ii) the stage of thermal reflow process and (iii) the stage of electroplating. The continuous micro-lens patterned LGP was fabricated with injection molding and its test results showed the possibility of commercial use in the future.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.8
• /
• pp.11-17
• /
• 2001

Industrial use of physical vapor deposition(PVD) has been widely expanded during last two decades, and in the mean time plasma assistance in PVD has become an essential tool in preparing compound films with dense microstructure. The principles of electron beam-based plating, balanced and unbalanced magnetron sputtering and cathodic arc deposition. consisting three basic configuration of plasma assisted PVD(PAPVD)process, were reviewed. Recent technical development in PVD coating process were discussed. This paper tries to show tendency for developing new coating film on cutting tools.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.2
• /
• pp.14-19
• /
• 2013

The size and distribution of residual stresses and the effect of the minimum mesh size were investigated by the a-Si thin film solar cell. Attributed to the difference in coefficient of thermal expansion of the a-Si and Ag concentrated residual stresses at the joint interface of dissimilar materials. The ${\sigma}y$ and ${\tau}xy$ didn't appear in the central part, but ${\sigma}x$ existed. However, ${\sigma}x$, ${\sigma}y$ and ${\tau}xy$ appeared in the edge part and concentrated residual stresses at the interface between a-Si and Ag. Minimum mesh size gets smaller, the concentration of ${\sigma}y$ was significantly and existence area was reduced. As a result, the failure of thin film solar cells during the cutting process can be explained by the residual stresses.

• Korean Journal of Medicinal Crop Science
• /
• v.22 no.3
• /
• pp.231-236
• /
• 2014

This experiment was carried out to establish the optimum cutting time, plant growth regulator, and bed-soil for rooting by greenwood cutting of Schisandra chinensis. Approximately 7 cm long-shoots of greenwood cuttings were transplanted by various cutting times, plant growth regulators, and bed-soils in the plastic-film house. The rooting rate of greenwood cutting was 12.5% in the April 5th, 73.5% in the May 8th, and 75.5% in the August 5th. The number and length of primary root in greenwood cutting were more in the early May than those in the early August. For mass propagation of Schisandra chinensis. using greenwood cutting, shoots were treated with plant growth regulators on May to increase rooting rate. Rooting rate was 100% with IAA $50mg/{\ell}$, 92.9% with NAA $100mg/{\ell}$, and NAA $1,000mg/{\ell}$, for 60 min. To select effective media for rooting, various medias for bed-soil were treated by single and mixture form for 100 days after cutting. Rooting rate was 91.8% in the single treatment of peat moss or decomposition of granite soil, and this result was better than those in other treatment. The treatment by 1 : 1 mixture of peat moss and horticulture bed soil was rooting with 94.0% best rooting rate.

• Journal of the Korean Society of Costume
• /
• v.66 no.4
• /
• pp.128-145
• /
• 2016

Unlike the past, when fashion brands adopted unilateral communication with their consumers, the brands today have recognized the importance of bi-lateral communication. This has led to the companies producing fashion films as a means to elicit a consensus in opinion between the brands and the consumers. Such fashion films should be understood as films using fashion that transcends time, and also as a type of fashion media. This study, which is based upon the understanding that fashion films are a part of strategic marketing for enhancing the value of brands, used domestic and international literature in order to define fashion films, and establish a theoretical basis for these films. Corroborative study was also conducted for the purpose of practical categorization. This study aims to investigate the characteristics of fashion films, and to suggest a new approach to the study of fashion films. The study adopted the research methodology used in Dudley Andrew's film theory in order to create a theoretical frame that can be used to categorize fashion films. The theory is of significance because it is the basis for the category of motion picture fashion film and media technology fashion film. The study on the categorization and the characteristics of fashion films based upon 6 sub-categories shows a consistent trend of fashion films. From the results, it can be inferred that the films contribute, in part, to the enhancement of brand value. Fashion films have shown rapid growth with the mixture of other media, and with the introduction of cutting-edge technology. Fashion films can be used as new marketing methods for the fashion brands in this digital age.

• Korean journal of applied entomology
• /
• v.24 no.4 s.65
• /
• pp.173-177
• /
• 1986

This study was carried out to see what makes the 'dark grey cutworm', Agrotis tokionis Butler, inflict less damage in P.E. film-mulched tobacco fields than in nonmulched ones. In field plot experiment, the damage ratio of tobacco seed lings in mulched plots(m) was reduced by 63% compared with that in non mulched ones(n). The altered environments did not affect the cutworm in mortality, which was confirmed by recovery ratio, location of larvae in soil, and developmental age. But the m/n value and damage ratio in plots of different mulching methods strongly suggest that the P.E. film itself prevent larvae from cutting the plants. Larval mortality was rapidly increased between the end of July and the end of August.