• 대한화학회지
• /
• 제35권5호
• /
• pp.539-544
• /
• 1991

X-ray Compton 산란선의 강도를 측정하여 내지문처리재(Anti-fingerprint Steel)의 표면에 Coating 되어 있는 Silicone resin film의 두께를 신속하게 측정할 수 있는 새로운 분석방법을 연구하였다. Silicone resin과 같은 유기수지들은 C, H, O, Si 등과 같은 경원소들로 구성되어 있어 compton 산란선의 강도가 높게 나타나는데 이러한 성질을 이용, X-ray tube로부터 발생된 RhK$_{\alpha}$ 선을 시료표면에 조사한 후 발생된 RhK$_{\alpha}$ compton 산란선의 강도를 측정하여 silicone resin film의 두께를 구하였다. 검량곡선 작성결과 0.2 ~ 5.0 ${mu}$m 범위에서 직선성을 나타냈으며 두께측정에 대한 정확도는 0.22 ${mu}$m 이었다.

• 한국식품저장유통학회지
• /
• 제1권1호
• /
• pp.15-20
• /
• 1994

This experiment was carried out to select the optimum thickness of polyethylene film for the nonastringency of astringent persimmon fruits during modified atmosphere(MA) storage of Cheongdo Bansi kept at 0$^{\circ}C$. The experimental plots were divided into 5 plots by film thickness(0.08, 0.10, 0.12, 0.14 and 0.16mm). The experimental items were the changes in concentration of CO2 and O2 in film brig, soluble tannin contents, loss of weight firmness and external appearance of fruits. The nonastringency of persimmon fruits can be achieved all groups excepting the 0.08mm film during MA storage. The sweet persimmon in film bag of 0.10 and 0.12mm maintained a high quality and firmness, but following the deastringency the fruits in 0.14 and 0.16mm developed off-color. The increasing of carbon dioxide level and decreasing of oxygen level in film bag created anaerobic condition at earth stage, and then it kept a constant level during stooge. According to film thickness the obvious difference in the change of soluble tannin contents external appearance and firmness were observed. It could be concluded that the optimum thickness of film for the desirable nonastringency on Cheongdo Bansi was 0.10mm.

• Tribology and Lubricants
• /
• 제20권5호
• /
• pp.225-230
• /
• 2004

Most studies of elsatohydrodynamic lubrication are oriented only to the measurement of film thickness itself with optical interferometer. In order to exactly investigate the tribological characteristics of a certain lubricant, it is also important to get the information of traction behaviors as well. In this work, we developed a device for measuring the friction force of ehl contact condition as well as the film thickness. To verify the validity of the measuring system, the friction forces and film thicknesses under ehl condition are simultaneously measured with the variations of additive ratios of viscosity index improvers which cause non-linear tendencies of film thickness to contact velocity.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.275-282
• /
• 2004

The engine bearing transmits the powers from cylinder to crankshaft with small clearance between con-rod and crankpin. The minimum oil film thickness is a significant parameter in the operation of bearing. The contact pressure of bearing should be considered for the reason that elastic deformation of bearing be caused by contact pressure of bearing. There are important factors which are maintaining of minimum oil film thickness expecting of the length of maximum and minimum oil film thickness with changing of the loads to keep running normally. Furthermore, this study is very crucial to develop the design of engine bearing and crankshaft system.

• Tribology and Lubricants
• /
• 제16권2호
• /
• pp.114-120
• /
• 2000

This paper reports on the theoretical analysis on the lubrication characteristics between the piston ring and the grooved cylinder liner. The circular shape piston ring and two types grooves are consider, and the minimum oil film thickness during the full engine cycle are obtained by using iterative technique. The comparative results of minimum oil film thickness and viscous friction force between the smooth and grooved liner are presented. And various design parameter of piston ring and liner groove are tested. The groove in the liner generally reduces the minimum value of minimum oil film thickness, but the maximum viscous friction force is increased at the minimum film position.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.617-619
• /
• 2001

The effect of the superconducting film thickness on the substrate temperature has been investigated. Superconducting YBCO thin films have been grown on MgO substrates by pulsed laser deposition. The dependence of the orientation of YBCO film on thickness has been investigated by X-ray diffraction technique. X-ray diffraction indicated that the film orientation was changed by increasing the film thickness and by changing the substrate temperature.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권1호
• /
• pp.85-91
• /
• 1998

In this paper, an influence of inlet pressure on the running characteristics of tilting pad thrust bearing is studied by a numerical analysis. The inlet pressure is obtained from the extended Bernoulli equation including the loss coefficient which is varied with the operating conditions. The running characteristic parameters such as the minimum film thickness, the film pressure and the film thickness ratios are calculated for various runner speeds with constant load in particular two pivot positions. The results are shown that the inlet pressure has a large influence on the minimum film thickness and other running characteristic parameters.

• 반도체디스플레이기술학회지
• /
• 제2권2호
• /
• pp.9-15
• /
• 2003

This paper proposes a thickness measurement method of silicon-oxide and poly-silicon film deposited on 12" silicon wafer for spin etcher. Halogen lamp is used as a light source for generating a wide-band spectrum, which is guided and focused on the wafer surface through a optical fiber cable. Interference signal from the film is detected by optical sensor to determine the thickness of the film using spectrum analysis and several signal processing techniques including curve-fitting and adaptive filtering. Test wafers with three kinds of priori-known films, polysilicon(300 nm), silicon-oxide(500 nm) and silicon-oxide(600 nm), are measured while the wafer is spinning at 20 Hz and DI water flowing on the wafer surface. From experiment results the algorithm presented in the paper is proved to be effective with accuracy of maximum 0.8% error.rror.

• Design & Manufacturing
• /
• 제12권2호
• /
• pp.5-10
• /
• 2018

Vacuum-assisted thermoforming is one of the critical steps for successful application of film insert molding(FIM) to parts of complex shape. In this study, the simulations and experiments of thermoforming processes were performed to investigate the effects of process conditions on thickness distribution and printed pattern deformation of films in vacuum-assisted thermoforming. The film thickness uniformity increased with decreasing film heating time, whereas it increased with increasing vacuum delay time. After thermoforming of films with uniform pattern space of 5mm, the maximum space was 9.432mm. Based on the simulation, a modified pattern was calculated to obtain uniform spaces after thermoforming. In the experiments for film with the modified pattern, the maximum space appeared 5.837mm. In, addition. the predicted patterns were in good agreement with the experimental results.

• 한국전기전자재료학회논문지
• /
• 제23권2호
• /
• pp.153-158
• /
• 2010

The crystallization of FePt/MgO(001) magnetic thin films of various thicknesses has been studied using synchrotron x-ray scattering, atomic force microscope, and vibrating sample magnetometer. In film with a 499-$\AA$-thick, face-centered tetragonal, ordered FePt phase was dominantly crystallized into perpendicular (001) grains keeping the magnetically easy c-axis normal to the film plane during annealing. In film with a 816-$\AA$-thick, however, longitudinal (110) grains keeping the c-axis parallel to the film plane were grown on top of the perpendicular (001) grains. The behavior of the magnetic properties was consistent with the thickness dependence of the crystallization. We attribute the thickness dependence of the crystallization to the substrate effect, which prefers the growth of the c-axis oriented perpendicular grains near the film/substrate interfacial area.