• Geosystem Engineering
• /
• 제21권6호
• /
• pp.318-325
• /
• 2018

Eight tight sandstone reservoir samples from $He_8$ and $Shan_1$ Formations of the Sulige Gas field were selected to perform gas-water micro-displacement experiment based on authentic sandstone micro-model. The gas pressure-relief experiment was proposed for the first time to simulate the pressure change and gas-water percolation characteristics in the process of gas exploitation. The experiment results show that: (1) In the process of gas accumulation, the gas preferentially flows into the well-connected pores and throats with large radius, but rarely flows into the area without pores and throats. (2) Under sufficient gas drive, the water in pores and throats usually exists in the forms of 'thin water film', 'thick water film', and 'water column', but under insufficient gas drive, gas fails to flow into new pathways in time, so that the reservoirs with large pores and throats are high in water cut. (3) Under the same water saturation, the reservoirs with better petrophysical properties has higher gas recovery factor within unit time. Under the same petrophysical conditions, the reservoirs with lower water saturation show higher gas recovery factor within unit time. The higher the permeability, the stronger the liquid carrying capacity of reservoirs.

• 농업과학연구
• /
• 제29권1호
• /
• pp.15-23
• /
• 2002

관행적인 수확기인 11월 6일에 수확한 '후지' 사과는 80% 이상이 밀증상을 나타내었으나 에틸렌 발생량을 기준으로 볼 때 climacteric stage에 도달하지는 않았다. 모의 수출 전 2 개월 저장기간 중 밀증상은 점차 감소하였다. 저장기간 중 가용성 고형물 수준은 일정하지 않았으나 경도와 생체중 감소가 저장기간일 길수록 증가하였다. 저장기간에 따라 모의 수출과 소매과정을 경과시킨 과실의 품질은 전반적으로 낮아졌지만 무처리에 비하여 30 um 플라스틱 필름 포장, 에틸렌제거제 처리는 전반적으로 과실의 품질을 소매단계까지 우수하게 유지시키는 결과를 보였다. 반면에 왁스처리는 외관품질을 우수하게 유지시켰지만 갈변장해를 일으켜 바람직하지 않았다. 따라서 수출용 과실은 건조한 환경에서 장기간 수송되고 판매되므로 품질저하가 심하여 이를 방지하기 위해서는 플라스틱 필름과 같은 moisture barrier 및 에 틸렌 제거 환경으로 선적하는 것이 바람직할 것으로 판단된다.

• 한국식품영양과학회지
• /
• 제35권9호
• /
• pp.1251-1255
• /
• 2006

대두단백 필름을 코팅한 라이너지의 효과를 알아보기 위하여 대두단백 $2\sim8%$의 농도 범위에서 필름을 제조하였다. 필름 제조시 친수성 소재인 대두단백의 불용화를 위하여 모든 필름은 formaldehyde로 포화된 데시케이터에서 2시간 동안 흡착하여 사용하였다. 필름의 연신강도, 연신율, 투습도 및 수분용해도를 측정한 뒤 최적 농도를 5%로 판단하였다. 필름의 제조적성을 위해 첨가된 가소제 glycerol은 대두단백 대비 40% 농도에서 필름제조에 가장 적합하였다. 앞의 조건을 이용하여 제조된 용액을 라이너지에 코팅하여 그 물성과 수분저항성을 측정하였다. Formaldehyde 처리된 대두단백 코팅 라이너지는 미처리 라이너지에 비하여 연신강도는 15 에서 21 MPa로 증가하였고, 수분용해도와 투습계수는 1.17%와 $2.06ng{\cdot}m/m^2{\cdot}s{\cdot}Pa$로 감소하여 물리적 성질과 수분저항성 모두 증진된 것을 알 수 있었다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.427-432
• /
• 2007

In general, the response of bulk material is independent of its size when it comes to considering classical elasticity theory. Because the surface to bulk ratio of the large solids is very small, the influence of surface can be negligible. But the surface effect plays important role as the surface to bulk ratio becomes larger, that is, the contribution of the surface effect must be considered in nano-size elements such as thin film or beam structure. Molecular dynamics computation has been a conventional way to analyze these ultra-thin structures but this method is limited to simulate on the order of $10^6-10^8$ atoms for a few nanoseconds, and besides, very time consuming. Analysis of structures in submicro to micro range(thin-film, wire etc.) is difficult with classical molecular dynamics due to the restriction of computing resources and time. Therefore, in this paper, the continuum-based method is considered to simulate the overall physical and mechanical properties of the structures in nano-scale, especially, for the thin-film.

• 분석과학
• /
• 제19권5호
• /
• pp.400-406
• /
• 2006

탄성되튐검출(Elastic Recoil Detection)법에 의한 박막시료의 수소 정량은 빔전류 측정의 신뢰성을 전제로 유기물 필름을 정량 비교체로 사용하여 이루어진다. 그러나 탄성되튐검출법에서 일반적으로 사용되는 편향각(tilt angle)인 $75^{\circ}$에서는 시편에 조사되는 일차 이온빔의 조사량을 정확하게 측정하기 어렵다. 시편의 편향각을 바꿔가며 탄성산란 신호를 비교하면 편향각이 커질수록 단위 조사량 당 산란신호는 감소하며 또한 시편의 표면 물질에 따라 이온빔전류 적산의 효율이 달라진다. 이러한 빔전류 적산과정의 오류를 제거하여 정량의 신뢰성을 제고하는 방법으로 되튐스펙트럼과 동시에 측정한 산란스펙트럼을 이용하여 빔 조사량을 결정하였다. 산란스펙트럼에 의한 조사량 결정법은 수 10%에 이르는 전류적산과정의 오차요인을 근본적으로 제거하여 되튐반응에 의한 수소정량의 신뢰성을 향상시켰다. 수소정량의 비교체로 사용해 왔던 폴리이미드 필름과 수소이온주입 시료, 그리고 카본웨이퍼를 대상으로 시험분석하고 기존의 전류적산에 의한 직접정량법과 비교하였다.

• 한국재료학회지
• /
• 제12권12호
• /
• pp.930-934
• /
• 2002

Nanosized $WO_3$ powders were synthesized by the sol-precipitation process using $WCl_{6}$ as the starting material, ethanol as a solvent and $NH_4$OH solution as a precipitant, followed by a washing-drying treatment and calcination. The effects on the powder crystallinity and microstructure of calcination temperature were investigated with XRD and FE-SEM. The $WO_3$ powders calcined at $500^{\circ}C$ and $700^{\circ}C$ showed good crystallinity and their mean particle size was 30nm and 70nm, respectively. These powders were used for the preparation of pastes which were printed as thick films on alumina substrates with comb-type Pt electrodes. The particle size strongly influenced the $NO_2$ gas sensing property of the thick films. A significant reduction in the $NO_2$ sensitivity was observed for the film prepared from larger particle size, having thus a larger grain size. For the film having a smaller grain size, on the other hand, the higher $NO_2$ sensitivity was observed and the sensitivity increased with $NO_2$ concentration.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.50-50
• /
• 2022

Recently, the use of mulching film has increased in soybean cultivation. Polyethylene (PE) films and biodegradable films (BF) have the advantages of improving soil moisture retention, geothermal maintenance, and CO2 maintenance as well providing weed control. Furthermore, BFs are a material that can compensate for the shortcomings of PE because it has the ability to decompose naturally by soil microorganisms, sunlight, and geothermal heat. Many researches have been carrying out studies regarding the development of BFs for these very reasons. This study was conducted better understand which films are optimal for soybean cultivation after evaluations of soybean growth and film characteristics of various BFs. BFs Farmsbio (Farm Hannong), Heulgro Film (Sejin Bio), Vonto Film (Eco-Hansung), two unnamed biodegradable films (Seojin Bio and Taesung), and a PE film were used in this study. For the control plots, no mulching was used. Experimental fields were fertilized according to conventional cultivation methods, tilled, and then covered with either BFs or PE films. After 1 week, soybean (cv. Daechan) seeds were seeded. Germination rate and plant height were measured at weekly intervals after seeding. In addition, pH, EC, and decomposition and light transmittance levels of films were measured during the experimental period. Daily average temperatures and relative humidity in soils was measured during the experimental period. There was no significant difference in germination rates and plant height in both crops grown with BFs and PE films, but crops grown in the control plot had significantly lower germination rates and growth. Soil pH was not significantly different regardless of treatments (BF, PE, and non-mulching) at 14, 28, and 42 days after seeding. In general, the EC contents in the control plots was lower than in crops grown using BFs and PE films. With the exception of some BFs, light transmittance and decomposition levels of films did not, in general, increase up to 70 days after soybean seeding. Since this study is ongoing, we are continually investigating these parameters. The average daily moisture in soil was higher in crops grown with BFs and PE films than in the control plot. However, the daily average soil temperature was not consistent regardless of treatments. Therefore, the BFs used in this study can be used without negative impacts on soybean growth.

• Plant Resources
• /
• 제6권3호
• /
• pp.211-214
• /
• 2003

This study was conducted to produce effectively more leaves of Angelica acutiloba through year-round production system by using various mulching materials and polyethylene(PE) tunnel. Soil temperature by covering treatment was higher in PE mulching and PE tunnel than in rice straw mulching, especially showing the highest temperature in PE tunnel from April through May. Water content of soil was higher in PE mulching than in non-mulching. Leaf production of Angelica acutiloba through year-round production showed the highest in PE tunnel and root production in PE mulching. These results suggest that leaf production of Angelica acutiloba can be maximized through PE tunnel cultivation system.

• 한국축산식품학회지
• /
• 제29권3호
• /
• pp.391-395
• /
• 2009

화분발효물(FPE)을 함유하는 Gelidium corneum - 젤라틴(GCG) 필름을 제조하여 돈육의 포장재로 사용하였다. FPE를 첨가한 GCG필름의 투습계수는 대조구 필름 보다 향상되었고 FPE 첨가 농도가 증가함에 따라 Escherichia coli O157:H7와 Listeria monocytogenes에 대한 항균효과는 증가하였다. 특히, 0.15% FPE 첨가는 E. coli O157:H7와 L. monocytogenes에 대해 대조구 대비 각각 2.98 and 3.68 Log CFU/g 감소시켰다. 또한 돈육 시료를 E. coli O157:H7 와 L. monocytogenes로 접종시킨 후 GCG 필름으로 포장한 후 저장 중 미생물 수의 변화를 측정한 결과, 0.15% 화분발효물이 첨가한 GCG 필름으로 포장 시 E. coli O157:H7와 L. monocytogenes 숫자가 저장 4일 후 대조구 대비 각각 1.49, 1.01 Log CFU/g 더 감소시켰다. 이러한 연구 결과는 0.15% 화분발효물이 첨가한 GCG 필름으로 포장한 돈육의 유통기한이 증대될 수 있음을 시사한다.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2019년도 추계학술대회
• /
• pp.46-46
• /
• 2019

The experiments were performed in the Jinan (elevation: 300 meters above sea level), Jeollabuk-do. Seedlings (n = 63 per $3.3m^2$) of ginseng cultivar (Cheonpung, Yeonpung) were planted on April 10, 2015. Shading material of plastic film house was blue-white film. Before the Planting seedling, silicate (3 kg/10 a) or chitosan (40 kg/10 a) was fertilized and foliar sprayed on the leaves 1000 times dilution solution once a month from May to September every year. The growth results of 5-year old ginseng surveyed in 2018 are as follows. The average air temperature in the plastic film house was the highest at $26.6^{\circ}C$ and $26.5^{\circ}C$ in July and August, respectively, and the highest temperature was $40.5^{\circ}C$ in July. The maximum daily temperature of $35^{\circ}C$ or more was 30 days, with the average soil temperature being $24.9^{\circ}C$ in August. The chemical properties of the test soil are as follows. pH was 6.4~6.9 level and EC was 0.35~0.46 dS/m. The organic matter content was 33.5~41.4 g/kg, and available-P content was 251.9~306.8 mg/kg. Exchangeable cations contents, such as K, Ca and Mg were all the appropriate ranges. The soil microbial density surveyed by the dilution plate method was 10~50 times higher than that of control (Non-treatment) and actinomycete density was 3~6 times higher. Pathogens of the genus Fusarium by Metagenome analysis decreased 91.3% and 68.2% respectively in the foliar sprayed of chitosan and soluble-silicate. The light intensity (PAR) in the blue-white film plastic film house gradually increased until July and then decereased, with the average of light intensity in March-October was $120.3umol/m^2/s$. The growth of aerial parts such as plant height and stem length was better than non-sprayed group in silicate or chitosan treatments and Yeonpung cultivar was superior to the Cheonpung cultivar. The SPAD value was higher in Yeonpung cultivar foliar sprayed with soluble-silicate. The growth of underground parts such as root length and taproot length were better in chitosan and soluble-silicate treatment than control, especially in Yeonpung cultivar foliar sprayed with chitosan was good in taproot length and taproot diameter, and fresh weight of root was 60.1 g. Ginsenoside contents were 24.9 mg/g and 22.4 mg/g, in the Cheonpung cultivar foliar sprayed with soluble-silicate or chitosan respectively, 28% and 15% higher than control (19.5 mg/g). The incidence of disease by Alteraria panax and Botrytis cinerea was 3~9% and 4~9%, respectively. High temperature damage rate was 3~5%.