• Tribology and Lubricants
• /
• v.39 no.5
• /
• pp.190-196
• /
• 2023

Anti-adhesion coatings are very important in the processing of adhesive materials such as optical clear adhesive (OCA) films. Choosing the appropriate release coating material for dies and tools can be quite challenging. Hydrophobic surface treatment is usually performed, and its performance is often estimated by the static water contact angle (CA). However, the relationship between the release performance and the CA is not well understood. In this study, the water CAs of surfaces coated with anti-adhesion materials and the peel strengths of the acrylic-based adhesive films are evaluated. STC5 and SUS304 are selected as the base materials. Base materials with different surface roughnesses are produced by hairline finishing, mirror-polishing, and end milling. Four fluoropolymer compounds, including a self-assembled monolayer, are selected to make the base surface hydrophobic. Static, advancing, and receding CAs are mostly increased due to the coating, but the CA hysteresis is found to increase or decrease depending on the coating material. The peel strengths all decreased after coating and are largely dependent on the coating material, with significantly lower values observed for fluorosilane and perfluoropolyether silane coatings. The peel strength is observed to correlate better with the static CA and advancing CA than with the receding CA or hysteresis. However, it is not possible to accurately predict the anti-adhesion performance based on water CA alone, as the peel strengths are not fully proportional to the CAs.

• Advances in nano research
• /
• v.16 no.4
• /
• pp.341-352
• /
• 2024

This study investigates the heat and mass transfer characteristics of a MoS₂ nanoparticle suspension in ethylene glycol over a porous stretching sheet. MoS₂ nanoparticles are known for their exceptional thermal and chemical stability which makes it convenient for enhancing the energy and mass transport properties of base fluids. Ethylene glycol, a common coolant in various industrial applications is utilized as the suspending medium due to its superior heat transfer properties. The effects of variable thermal conductivity, variable mass diffusivity, thermal radiation and thermophoresis which are crucial parameters in affecting the transport phenomena of nanofluids are taken into consideration. The governing partial differential equations representing the conservation of momentum, energy, and concentration are reduced to a set of nonlinear ordinary differential equations using appropriate similarity transformations. R software and MATLAB-bvp5c are used to compute the solutions. The impact of key parameters, including the nanoparticle volume fraction, magnetic field, Prandtl number, and thermophoresis parameter on the flow, heat and mass transfer rates is systematically examined. The study reveals that the presence of MoS₂ nanoparticles curbs the friction between the fluid and the solid boundary. Moreover, the variable thermal conductivity controls the rate of heat transfer and variable mass diffusivity regulates the rate of mass transfer. The numerical and statistical results computed are mutually justified via tables. The results obtained from this investigation provide valuable insights into the design and optimization of systems involving nanofluid-based heat and mass transfer processes, such as solar collectors, chemical reactors, and heat exchangers. Furthermore, the findings contribute to a deeper understanding of stretching sheet systems, such as in manufacturing processes involving continuous casting or polymer film production. The incorporation of MoS₂-C₂H₆O₂ nanofluids can potentially optimize temperature distribution and fluid dynamics.

• Animal Bioscience
• /
• v.37 no.1
• /
• pp.123-130
• /
• 2024

Objective: Beef of Jeju black cattle (JBC) is considered as a healthy meat type due to its significantly higher unsaturated fatty acids (UFA). Lipid (e.g., UFA) is highly susceptible to oxidizing agents, which results in the quality deterioration and economic value loss of meat products. Therefore, development and application of novel preservative techniques is necessary to improve the shelf-life stability of high-UFA beef. The objective of this study was to assess the applicability of chitosan-based coatings in preservation of JBC beef. Methods: Different coating solutions: 2% chitosan alone, and 2% chitosan containing 0.1% or 0.3% gallic acid were prepared to investigate their applicability in preservation of fresh beef during storage. Jeju black cattle beef (2-cm thick steaks) were non-coated (control) or coated with the above coating solutions, placed on trays, over-wrapped with plastic film and stored at 4℃. The microbiological indices, color, total volatile basic nitrogen (TVBN) and lipid oxidation of the beef were investigated after 1, 10, and 21 days of storage. Results: Coating with 2% chitosan alone reduced the spoilage bacteria count, TVBN and thiobarbituric acid reactive substances levels in the beef compared with control during storage (p<0.05). Noticeably, coating with 2% chitosan containing 0.1% or 0.3% gallic acid was more effective on retardation of spoilage bacteria growth, lipid oxidation and discoloration in the beef compared to the chitosan coating alone over the storage period (21 days) (p<0.05). Conclusion: Taken together, the combined chitosan and gallic acid coating could be used as a bio-preservative technique in the meat industry.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.723-730
• /
• 2024

In order to trace the changes in the concept and understanding of automatically generated images, this study analogously explores the creative methods of photography and cinema, which represent the existing image fields, in terms of AI-based image creation methods and 'automaticity', and discusses the understanding and possibilities of new automatic image creation. At the time of the invention of photography and cinema, the field of 'automatic creation' was established for them in comparison to traditional art genres such as painting. Recently, as AI has been applied to video production, the concept of 'automatic creation' has been expanded, and experimental creations that freely cross the boundaries of literature, art, photography, and film are active. By utilizing technologies such as machine learning and deep learning, AI automated creation allows AI to perform the creative process independently. Automated creation using AI can greatly improve efficiency, but it also risks compromising the personal and subjective nature of art. The problem stems from the fact that AI cannot completely replace human creativity.

• Journal of Bio-Environment Control
• /
• v.25 no.2
• /
• pp.106-110
• /
• 2016

In this study, a planting density-growth-harvest (PGH) chart was developed to easily read the growth and harvest factors such as crop growth rate, relative growth rate, shoot fresh weight, shoot dry weight, harvesting time, marketable rate, and marketable yield of common ice plant (Mesembryanthemum crystallinum L.). The plants were grown in a nutrient film technique (NFT) system in a closed-type plant factory using fluorescent lamps with three-band radiation under a light intensity of $140{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ and a photoperiod of 12 h. Growth and yield were analyzed under four planting densities ($15{\times}10cm$, $15{\times}15cm$, $15{\times}20cm$, and $15{\times}25cm$). Shoot fresh and dry weights per plant increased at a higher planting density until reached an upper limit and yield per area was also same tendency. Crop growth rate, relative growth rate and lost time were described using quadratic equation. A linear relationship between shoot dry weight and fresh weights was observed. PGH chart was constructed based on the growth data and making equations. For instance, with within row spacing (= 20 cm) and fresh weight per plant at harvest (= 100 g), we can estimate all the growth and harvest factors of common ice plant. The planting density, crop growth rate, relative growth rate, lost time, shoot dry weight per plant, harvesting time, and yield were $33plants/m^2$, $20g{\cdot}m^{-2}{\cdot}d^{-1}$, $0.27g{\cdot}g^{-1}{\cdot}d^{-1}$, 22 days, 2.5 g/plant, 26 days after transplanting, and $3.2kg{\cdot}m^{-2}$, respectively. With this chart, we could easily obtain the growth factors such as planting density, crop growth rate, relative growth rate, lost time and the harvest factors such as shoot fresh and dry weights, harvesting time, marketable rate, and marketable yield with at least two parameters, for instance, planting distance and one of harvest factors of plant. PGH charts will be useful tools to estimate the growth and yield of crops and to practical design of a closed-type plant production system.

• Plant Journal
• /
• v.18 no.4
• /
• pp.58-65
• /
• 2023

In this study, to increase the methane content of biogas supplied from Nanji Water Regeneration Center and to purify impurities, a three-stage membrane purification process was designed and installed to demonstrate operation. The methane concentration of biomethane produced in the 2 Nm3/h purification process was set to three cases: 95%, 96.5%, and 98%, and the membrane area ratio of the membrane was 1:1, 1:2, 1:1:1, The optimum conditions for the membrane area of the separator were derived by changing to five of 1:2:1 and 1:2:2. 3 stage separation membrane process of 30 Nm3/h was installed to reflect the optimum condition of 2 Nm3/h, and biomethane production of 98% or more of methane concentration was demonstrated. As a result of the operation of the 2 Nm³/h refining device, the methane recovery rate at the 98% methane concentration was 95.6% when the membrane area ratio was 1:1 as the result of the two-stage operation of the separator, and the recovery rate of methane at 1:2 was increased to 96.8%. The methane recovery rate of the membrane three-stage operation was highest at 96.8% when the membrane area ratio was operated at 1:2:1. The carbon dioxide removal rate was 16.4 to 96.4% and the 2:2 to 95.7% film area ratio in the two-step process. In the three-step process, the film area ratio was 1:2:1 to 95.4%, and the two-step process showed higher results than the three-step process. In the 30 Nm3/h scale biogas purification demonstration operation, the methane concentration after purification was 98%, the recovery rate of methane was 97.1%, the removal rate of carbon dioxide was 95.7%, and hydrogen sulfide, the cause of corrosion, was not detected, and the membrane area ratio was 1:2:1 demonstration operation, biomethane production with a methane concentration of 98% or higher was possible.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.4
• /
• pp.326-333
• /
• 2005

To enhance groundwater quality and soil nutrient management in fertigated plastic film house, groundwater samples from Jinju 52, Sacheon 3, Changnyeong 3, Sancheong 4 and Namhae 2 sites and soil samples from Jinju 23 sites were collected from September to November in 2004. The average concentration of $NO_3-N$ in groundwater was $12.0mg{\ell}^{-1}$ and 20% of survey sites exceeded the limiting level $(20mg{\ell}^{-1})$ of agricultural goundwater quality. The amount of ions in groundwater was in the order of $Ca^{2+}>Na^+>Mg^{2+}>NH_4-N>K^+$ in cations and ${HCO_3}^->{SO_4}^{2-}>NO_3-N>Cl^-$ in anions. Electrical conductivity of groundwater was positively correlated with $Ca^{2+},\;Cl^-,\;Mg^{2+},\;{SO_4}^{2-},\;NO_3-N\;and\;Na^+$ concentrations. In addition, it had significantly positive correlation with sum cations and anions, respectively $({\Sigma}cations\;(me{\ell}^{-1})$ = EC values $(dS\;m^{-1}){\times}4.65,\;{\Sigma}anions\;(me{\ell}^{-1})$ = EC values $(dS\;m^{-1}){\times}7.63\;and\;{\Sigma}\;(cations+anions,\;me{\ell}^{-1})$ = EC values $(dS\;m^{-1}){\times}11.1)$. The proportions of soil chemical properties over the critical levels for crop production in fertigated plastic film house were 56.5% in pH, 47.8% in OM, 95.7% in available $P_2O_5$, 78.3% in exchangeable K, 87% in exchangeable Ca, 56.5% in exchangeable Mg and 43.5% in EC. Soil pH was positively correlated with pH $(r=0.540^{**})$ and ${HCO_3}^-$ concentration $(r=0.523^{**})$ of groundwater.

• Journal of Bio-Environment Control
• /
• v.27 no.1
• /
• pp.7-12
• /
• 2018

This study was conducted to determine effects of precooling and storage methods on asparagus spears' quality such as changes of fresh weight and color during simulated export distribution. Two types of precooling methods, air cooling and hydrocooling, were applied prior to packaging by comparing with no precooling as a control. Asparagus spears were packed with oxygen transmission rate (OTR) film for modified atmosphere packaging (MAP) and perforated (PF) film for a conventional packaging. All treatments were stored at $8^{\circ}C$ for 20 hours, and subsequently at $4^{\circ}C$ by final storage day, which is simulated distribution temperature condition from Yanggu, Korea to Shimonoseki, Japan. The half cooling time was 12 minutes for air cooling and 15 seconds for the hydrocooling, indicating precooling process of asparagus spears faster with the hydrocooling. Rates of respiration and ethylene production were lowest with hydrocooling. Fresh weight loss was higher, approximately 11%, at the control condition in conventional storage, compared with the MAP, less than 0.5%. Carbon dioxide and oxygen content in the MAP was in the permissible ranges for asparagus spears under recommended CA/MA conditions under both the air cooling and hydrocooling. Ethylene content in the film package was lower with the precooling treatment. Firmness of stems was lowest with the hydrocooling prior to the MAP. Visual quality, off-odor, and hue angle value were best with hydrocooling prior to the MAP. In conclusion, the combination of hydrocooling with the MAP is effective in preserving quality during the export distribution process.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.2
• /
• pp.160-165
• /
• 2010

To reduce the dose of fertilizers is very important to sustainable production of many horticultural crops, including strawberry. In order to practice the environment friendly agriculture of strawberry cultivation in plastic film house, soil chemical properties of 435 soil samples (232 for loam, 83 for sandy loam, and 120 for silt loam) in Chungnam Province from2008 to 2009 were determined. The average of pH, EC, OM, Av. $P_2O_5$, Ex. $K^+$, Ex. $Ca^{2+}$, Ex. $Mg^{2+}$, and Ex. $Na^+$ was 6.5, 2.28 dS $m^{-1}$, 26 g $kg^{-1}$, 910 mg $kg^{-1}$, 1.09 $cmol_c\;kg^{-1}$, 8.3 $cmol_c\;kg^{-1}$, 2.5 $cmol_c\;kg^{-1}$, and 0.58 $cmol_c\;kg^{-1}$, respectively. The content of Av. $P_2O_5$ in sandy loam soil was significantly higher than silt loam soil, whereas other properties showed no difference between soil texture. The kinds of strawberry cultivars showed no difference in soil chemical properties. The frequency distribution within optimum range of soil chemical properties was 30.6%, 35.4%, 37.0%, 5.3%, 8.5%, 8.5%, and 17.9% for pH, EC, OM, Av. $P_2O_5$, Ex. $K^+$, Ex. $Ca^{2+}$, and Ex. $Mg^{2+}$, respectively. Especially, excessive portion of Av. $P_2O_5$, and Ex. $Ca^{2+}$ were high 86.9%, and 86.0%, respectively. EC values of soil samples were significantly positive correlatoin with all chemical properties except soil pH. In principle component analysis of chemical properties in soil samples, the percentage of variance explained by PC 1 was 38.8%, while PC 2 explained 17.8%of the variance, for a cumulative total of 56.6%. These results were able to distinguish between soil textures and strawberry cultivars. Also, these results considered that understanding of soil chemical properties under using principal component analysis be able to improve amounts of fertilizers for sustainable agriculture in plastic film house.

• Food Science and Preservation
• /
• v.23 no.4
• /
• pp.479-487
• /
• 2016

This study was conducted to investigate the effect of 1-methylcyclopropene (1-MCP) and ethylene-absorbent on the qualities of Prunus mume fruit. Prunus mume fruits were stored without film packaging (Cont), packed in LDPE film (Cont-P), and packed with ethylene-absorbent (Cont-PE). Fruits were treated with 1-MCP (1 ppm) for 24 hr at $1^{\circ}C$. After treatment, fruits were packed in LDPE film (MCP-P) and with ethylene-absorbent (MCP-PE) and then stored at $1^{\circ}C$ for 8 weeks. Total soluble solids increased during storage but decreased after 6 weeks while total acidity decreased during storage. Cont was almost completely decayed after 8 weeks of storage while Cont-P, Cont-PE, MCP-PE, and MCP-P were 46, 69, 83, and 5% decayed, respectively. L value decreased but a value increased during storage in all samples. Firmness of peel and flesh of samples decreased gradually for 8 weeks. Respiration rate did not show any significant difference among samples. Ethylene production of Cont showed $0.05{\mu}L/kg/h$ but immediately after 1-MCP treatment, it showed $0.02{\mu}L/kg/h$. Oxalic and malic acids decreased while citric acid increased during storage; fructose and glucose substantially decreased after 8 weeks whereas sorbitol and sucrose increased upto 4 weeks and then decreased thereafter. Based on these results, packing the fruits treated with 1-MCP could extend the freshness of Prunus mume fruit.