• Research in Plant Disease
• /
• v.10 no.4
• /
• pp.304-309
• /
• 2004

Girdling of trunk and rainproof installation over kiwifruit (Actinidia deliciosa) trees were turned out to alleviate bacterial blossom blight effectively in kiwifruit orchards. The disease was most effectively prevented by girdling of tree trunks with 20 mm width around April 10 before about 45 days of flowering stage of kiwifruit, but control efficiencies were not affected by height of girdling on trunks above the ground. Use of a transparent polyvinyl film to protect kiwifruit trees from rain was more effective than windbreak net to prevent the disease, irrespective of kinds of rainproof installation. Installation of partial rainproof vinyl cover over kiwifruit trees around March 10 before about 75 days of flowering stage of kiwifruit prevented most of the disease occurrence on kiwifruit. It is expected that girdling of tree trunks and installation of partial rainproof vinyl cover over kiwifruit trees will be practical as environmentally friendly control methods to manage bacterial blossom blight in kiwifruit orchards.

• Journal of the Korean Society of Safety
• /
• v.23 no.1
• /
• pp.66-71
• /
• 2008

A new route to phthalocyanine complexes were developed to synthesize these products by fusion in the absence of solvent. This new method of synthesis without using solvent has advantages over the conventional synthetic methods since there are no risk of explosion and formation of harmful vapor from organic solvent. Reaction of PcFe with axial ligands such as $PcFe(4-VP)_2$[Pc: Phthalocyanine, 4-VP: 4-Vinylpyridine] and $PcFe(VIM)_2$[VIM: 1-Vinylimidazole] afforded powderlike, pure dark greenish blue colored products. The resulted products are soluble in $CH_2Cl_2$ and found to be complexes of the type $PcFeL_2$. Spectral properties were studied with ATR-FTIR and UV/Vis. Thermal and electrical characterization was also performed. Phthalocyanine complexes exhibit useful properties such as UV/Vis blocking, antistatic characteristics and excellent thermal stability and we anticipate various applicability in numerous products.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.10
• /
• pp.788-792
• /
• 2010

The yttrium-barium-copper-oxide (YBCO) coated conductor, which supplement the fault of the existing superconducting current-limit materials YBCO thin film, bismuth-strontium-calcium-copper-oxide(BSCCO) wire and bulk, has been improved its mechanical weakness and has high index; hence, after quench YBCO coated conductor could limit the fault current effectively because of fast resistance occurrence speed. Furthermore, it has wide applicable area as an current limit material because it shows different resistance occurrence tendency by the thickness and kind of stabilization material sputtered on the superconducting layer. Therefore, many researchers are carrying out the study of application of YBCO coated conductor to superconducting fault current limiter (SFCL) for making high quality current limit element, based on resistance type. On the other hand, the study for other type except resistance type has been rarely conducted for the application of YBCO coated conductor to SFCL as an current limit element. Consequently, in this study, YBCO coated conductor with different stabilization layer Cu and Stainless steel, is applied to SFCL using iron core and coil, and examine the many index points as an current limit element, such as current limit characteristic, the tendency of resistance occurrence, response time, the temperature trend for stability.

• The Journal of the Korea Contents Association
• /
• v.10 no.8
• /
• pp.159-167
• /
• 2010

Since success of in the box office, there are not only highly interested in 3D Stereoscopic in Media market but also has been briskly supporting for 3D Stereoscopic producing in variety platforms including film, broadcasting, mobile They expect 3D Stereoscopic will be a new standard format for media of domestic market as well as overseas. However there are required professional production system and grant capital for 3D Stereoscopic production. In case of domestic industry, there are not forged through specialized production system and lack of 3D Stereoscopic producing. They are needed not only Pipeline for 3D Stereoscopic production but also strategic supporting like specialized education and test-bed for 3D Stereoscopic production. It is able to established efficient and specialized system for 3D Stereoscopic production given the pipeline proposal.

• Journal of dental hygiene science
• /
• v.5 no.4
• /
• pp.221-225
• /
• 2005

In this study, survey is conducted to make aware of importance which personal protection was accomplished at the dentistry. It investigated the performance of infection control and X-ray safety management to the third grade of D-Health College. 1. The infection control is recognized to high level and practiced certainly at actual training of oral prophylaxis. 2. The infection control is recognized to low level relatively at actual training of radiography. 3. The infection control is not practiced at actual training of radiography except for the film holder. 4. The X-ray safety management is recognized to high level and conducted certainly at actual training of radiography. To consider the above result, the infection control is not nearly practiced at radiography. In accordance with, the education must be demanded that the infection control is practiced throughly at radiography for raising a necessary against the recognization and practice of the infection control.

• Progress in Superconductivity and Cryogenics
• /
• v.18 no.4
• /
• pp.1-4
• /
• 2016

We investigated the relation between the Cu-O bond length and the superconducting properties of $BaSnO_3$ (BSO)-added $GdBa_2Cu_3O_{7-x}$ (GdBCO) thin films by using extended x-ray absorption fine structure (EXAFS) spectroscopy. 4 wt.% $BaSnO_3$ (BSO) added $GdBa_2Cu_3O_{7-x}$ (GdBCO) thin films with varying thickness from $0.2{\mu}m$ to $1.0{\mu}m$ were fabricated by using pulsed laser deposition (PLD) method. The transition temperature ($T_c$) and the residual resistance ratio (RRR) of the GdBCO films increased with increasing thickness up to $0.8{\mu}m$, where the crystalline BSO has the highest peak intensity, and then decreased. This uncommon behaviors of $T_c$ and RRR are likely to be created by the addition of BSO, which may change the ordering of GdBCO atomic bonds. Analysis from the Cu K-edge EXAFS spectroscopy showed an interesting thickness dependence of ordering behavior of BSO-added GdBCO films. It is noticeable that the ordering of Cu-O bond and the transition temperature are found to show opposite behaviors in the thickness dependence. Based on these results, the growth of BSO seemingly have evident effect on the alteration of the local structure of GdBCO film.

• The Journal of the Korea Contents Association
• /
• v.10 no.2
• /
• pp.184-192
• /
• 2010

In the current so-called age of emotion marketing, the independent form of handwriting of calligraphy is being revitalized in various fields such as advertising, book designs, film titles, posters, packages, BI, and even fashion. Thus centered on Gyeyang-gu at the city of Incheon, 100 outdoors signs that used calligraphy were chosen and we researched a reform plan that could revitalize calligraphy in outdoor signs by classifying them according to current conditions of the use of calligraphy, actual conditions of practical use, expression tools, and analyzing the use of colors. The result was trial requests not only from the formalities industry, but also the financial sector, public corporations, and several other businesses, but in order to provide not only for franchise brand logotypes manufactured by expensive experts, but also provide production of high-quality calligraphy for low costs for small private enterprises, the development of a diverse calligraphy education program, centered on the regional society, will be needed. In the midst of globalization, in order to advertise the beauty of Korean alphabet and to create our own unique street culture, a variety of tools and tactile expressions are demanded, in the future the research on the calligraphy of outdoor signs must be revitalized.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.28-31
• /
• 2002

Filmless full-PACS in korea has rapidly been growing, since government had supported collaborative PACS project between industry and university hospital in late of 1995. At the same time, a small company had started PACS business, while the Korea PACS society was being formed. In the beginning, PACS societies had focused on developing peripheral solutions such as DICOM gateway for image acquisition, x-ray film digitizer, and viewing software for research or management of personal image data, while Samsung Medical Center had started installing an imported partial PACS system which had recently upgraded with a new system. In similar time frame, a few hospitals had started developing and installing domestic large scale full-PACS system. Several years later, many hospitals have installed full-PACS system with national policy of reimbursement for PACS exams in November 1999. It is believed that Korea is the first country that adopted PACS reimbursement for filmless full-PACS as a national policy. Both experiences of full-PACS installation and national policy generated tremendous intellectual and technological expertise about PACS at all levels, clinical, hospital management, education, and industrial sectors. There are currently three types of PACS system which includes domestic, imported, and hybrid PACS system with imported solution for core system and domestic solution for peripheral system. There are more than 20 domestic PACS companies and they have now enough experiences so that they are capable of installing a truly full-PACS system for large-scale teaching hospitals. PACS societies in Korea understand how to design, implement, install, manage, sustain, and provide good services for large-scale full-PACS. PACS society has also strength for the highest integration technology of the Hospital Information. However, further understanding and timely implementation of continuously evolving international standard and integrated healthcare enterprise concepts may be necessary for international leading of PACS technologies for the future.

• Journal of Digital Convergence
• /
• v.15 no.8
• /
• pp.409-416
• /
• 2017

The game market has not only grown in size of the 10 trillion won but also the form and function of game use. Serious game combines the educational purpose and the fun of the game and develops it so that contents such as national defense. In this study, we analyze the cases of five application areas for the activation of serious games, and develop factors that the serious game should have, we want to see what the characteristics are and how important it is. The results of analysis show that it was analyzed that most serious games of application field were developed as 'experiential games' such as education, learning, experience, and simulation. This means that it is very effective to develop a serious game in consideration of the characteristics that a potential user should prefer a sensible game as well as a clear goal of a serious game in game development.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.11a
• /
• pp.221-225
• /
• 2003

The MFIS-FET(Field Effect Transistor) devices using $BLT/Y_2O_3$ buffer layer on p-Si(100) substrates were fabricated by the Sol-Gel method and conventional memory processes. The crystal structure, morphologies and electrical properties of prepared devices were investigated by using various measuring techniques. From the C-V(capacitance-voltage) data at 5V, the memory window voltage of the $Pt/BLT/Y_2O_3/si$ structure decreased from 1.4V to 0.6V with increasing the annealing temperature from $700^{\circ}C\;to\;750^{\circ}C$. The drain current (Ic) as a function of gate voltages $(V_G)$ for the $MFIS(Pt/BLT/Y_2O_3/Si(100))-FET$ devices at gate voltages $(V_G)$ of 3V, 4V and 5V, the memory window voltages increased from 0.3V to 0.8V as $V_G$ increased from 3V to 5V.