• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1604-1607
• /
• 2009

YAG laser crystallization of Si-based thin film deposited on plastic substrate has been studied. The Si-based thin films as crystallization precursor are with varied hydrogen (H) content. The effect of the H content on the crystallinity of the resulted poly-Si film has been investigated. The experimental results of the poly-Si crystallized by doublefrequency YAG laser shows that the initial dehydrogenation process could be left out if ${\mu}c$-Si was adopted as the crystallization precursor. The YAG laser annealing condition on plastic substrate and the crystallization results have been discussed in the paper.

• Journal of Fisheries and Marine Sciences Education
• /
• v.10 no.1
• /
• pp.79-86
• /
• 1998

In this study, the adhesive effect, blistering behavior and electrochemical polarization behavior of red lead film by the pretreatment work of sandblasting and potassium chromate($K_2CrO_4$) were investigated to prevent the corrosion of gas storage tank under marine environment. The main results obtained are as follows : 1) The adhesive effect of red lead film by the pretreatment work of sandblasting and potassium chromate is more improved than that of red lead film. 2) The blistering occurrence of red lead film by the pretreatment work of sandblasting and potassium chromate is more delayed than that of red lead film. 3) As the anodic potential is increased, corrosion current density of red lead film by the pre treatment work of sandblasting and potassium chromate is lower drained than that of red lead film.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.4
• /
• pp.12-17
• /
• 2019

In this study, the Ag nano-dots structure and silicon nitride film were applied to the textured wafer surface to improve the light trapping effect of mono-crystalline silicon solar cell. Ag nano-dots structure was formed by performing a heat treatment for 30 minutes at 650℃ after the deposition of 10nm Ag thin film. Ag thin film deposition was performed using a thermal evaporator. The silicon nitride film was deposited by a Hot-wire chemical vapor deposition. The effect of light trapping was compared and analyzed through light reflectance measurements. Experimental results showed that the reflectivity increased by 0.5 ~ 1% under all nitride thickness conditions when Ag nano-dots structure was formed before nitride film deposition. In addition, when the Ag nano-dots structure is formed after deposition of the silicon nitride film, the reflectance is increased in the nitride film condition of 70 nm or more. When the HF treatment was performed for 60 seconds to improve the Ag nano-dot structure, the overall reflectance was improved, and the reflectance was 0.15% lower than that of the silicon nitride film-only sample at 90 nm silicon nitride film condition.

• Journal of information and communication convergence engineering
• /
• v.15 no.4
• /
• pp.217-226
• /
• 2017

Korea has the tenth largest film industry in the world; however, detailed analyses using the factors contributing to successful film commercialization have not been approached. Using big data, this paper analyzed both internal and external factors (including genre, release date, rating, and number of screenings) that contributed to the commercial success of Korea's top 10 ranking films in 2011-2015. The authors developed a WebCrawler to collect text data about each movie, implemented a Hadoop system for data storage, and classified the data using Map Reduce method. The results showed that the characteristic of "release date," followed closely by "rating" and "genre" were the most influential factors of success in the Korean film industry. The analysis in this study is considered groundwork for the development of software that can predict box-office performance.

• Journal of Ceramic Processing Research
• /
• v.19 no.6
• /
• pp.479-482
• /
• 2018

Polystyrene superstructure films show faint rainbow color, and this low color saturation limits its wide application. In this paper, polystyrene superstructure films with single bright blue color were prepared by vertical deposition self-assembly method using polystyrene microspheres with average diameter of $310{\pm}10nm$ as raw material. Polystyrene superstructure films were modified by adding nano-carbon powder, and effect of the amount of nano-carbon powde on color performance was studied. The results showed that without addition of nano-carbon powder, the superstructure films showed a faint rainbow color, while with addition of nano-carbon power, the superstructure films exhibited a single bright blue under the same natural light source. Changing the amount of nano-carbon powder addition could adjust color saturation of the film. With increasing the amount of nano-carbon powder addition from 0.008 wt% to 0.01 wt%, color saturation of the superstructure film increased gradually. Further increasing the amount of nano-carbon powder addition to 0.011wt%, color saturation of the superstructure film didn't increase anymore and tended to get dark.

• Journal of the Semiconductor & Display Technology
• /
• v.13 no.3
• /
• pp.27-33
• /
• 2014

To develop high efficiency crystalline solar cells, the $SiN_x$ film for surface passivation and anti-reflection coating is very important and it is generally deposited by PECVD. In this paper, the $SiN_x$ film deposited by Hot-Wire chemical vapor deposition(HWCVD) that has no plasma damage was studied. First, to optimize the $SiN_x$ film deposition process, $SiH_4$ gas rate and substrate temperature were varied and then refractive index and thickness were measured. When $SiH_4$ gas rate was 22sccm and substrate temperature was $100^{\circ}C$, refractive index was 1.94 and higher than that of other process conditions. Second, the lifetime was measured by varying the annealing temperature and time. The annealing process was made from 5 to 30 minutes at $300{\sim}500^{\circ}C$. When the annealing temperature was $100^{\circ}C$ and time was 10minute, the lifetime was the highest. The lifetime of annealed samples was also measured after the firing process at $975^{\circ}C$. Although the lifetime of all samples was decreased by firing process, the lifetime of annealed samples before the firing process was higher than that of fired samples only. Finally, the characteristics of solar cells with HWCVD $SiN_x$ film were measured.

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1518-1527
• /
• 2023

A method was proposed for in-situ evaluating the thickness and resistivity of the oxide/hydroxide film formed on the surface of aluminum alloy exposed to sump water formed in the containment after a loss-of-coolant accident. The evaluation entailed fitting a model for the film impedance, which has film thickness and other variables describing the resistivity profile of the film along its thickness direction as fitting parameters, to the practically measured electrochemical impedance data. The obtained resistivity profiles implied that the films formed at pHs_25℃ 7, 8, 9, 10, and 11 all had a duplex structure; compared to the outer layer in contact with the solution, the inner layer of the film had a much higher resistivity and was inferred to be denser and provide most of the protectiveness of the film. Both the thickness and the total resistance of the film decreased with the increasing solution pH_25℃, suggesting that the films formed in more alkaline solutions had less protectiveness against corrosion, consistent with the increasing aluminum alloy corrosion rates previously identified.

• Research in Community and Public Health Nursing
• /
• v.12 no.3
• /
• pp.795-814
• /
• 2001

To evaluate the effect of sex education on middle school students' access to the obscene online computer and video film contents. 154 students were selected as experimental group. and 154 students were selected as control group, sampled randomly from Andong. Kyungbook, Korea. An analysis was performed. A non-equivalent control group pre test-post test research design was used. The data were collected from April 2nd to April 19th. 2001. A pre-survey was done on general characteristics and the condition of accessing obscene online computer and video film contents on both experimental and control group. From the survey results information. sex education contents were put together. The researcher organized 3 ready-made sex education program and explained to the four school health nurses about the ready-made sex education program step by step and they educated their selected students with three classes of 45 minutes lecture. Two weeks after the last lecture, a post-test was conducted. Four weeks from the last lecture, another post-test was conducted. The existing studies by Choi Yongseon(1998) and Kim Hyeok(1998) were reviewed and two professors in the department of community health nursing advised on the study questionnaire writing. An SPSS Win 10.0 was used. The data of respondents' general characteristics were analyzed using frequency and percentage. $X^2$ test was used to verify the homogeneity of the experimental group and the control group. Repeated Measures ANOVA was used to find out whether sex education had an effect on the awareness of obscene online computer and video film contents and under-age prostitution through the online computer networks. and time and frequency of access to the obscene online computer and video film contents. The results of the study are as follow. 1. The results of the verification of homogeneity between the experimental group and the control group showed that there was no significant difference between the experimental group and the control group. 2. The first hypothesis, 'the experimental group which received sex education would have a higher level of awareness of accessing obscene contents than the control group which did not receive the education' was supported at p<0.0001. 3. The second hypothesis. 'the experimental group which received sex education would have a higher level of awareness of underage prostitution on computer networks than the control group which did not receive the education' was supported at p<0.05. 4. The third hypothesis, 'the experimental group which received sex education would spend time less accessing obscene video and computer contents than the control group which did not receive the education' was rejected at p>.05. 5. The 4-1 hypothesis. 'the experimental group which received sex education would access obscene computer contents less frequently than the control group which did not receive the education' was supported at p<0.0001. 6. The 4-2 hypothesis, 'the experimental group which received sex education would access obscene video contents less frequently than the control group which did not receive the education' was supported at p<0.0001. In conclusion, a systematic step-by-step sex education program should be developed to protect middle school students from the harmful online computer and video film access. An effective teaching material for sex education should be prepared to decrease middle school students' access to obscene online computer and video film contents.

• Journal of Engineering Education Research
• /
• v.23 no.3
• /
• pp.41-48
• /
• 2020

In light of the 4th industrial revolution, this research identifies critical thinking education as the key component of cultivating a new pool of integrative talents. It seeks to find ways to incorporate artificial intelligence, one of the biggest upcoming innovations, into critical thinking education. This paper aims to propose an education model that raises awareness on related issues of AI and set a healthy direction for its development through debates on topics raised by the film, Ex Machina, which depicts the dangerous implications of AI technology.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.23 no.2
• /
• pp.43-52
• /
• 2021

This case study developed and operated "Fashion & Film" as a fashion-related liberal arts course. The class was designed to include fashion styles exhibitted in films, fashion-related PPL, fashion design through film, fashion images of movie characters, considering gender & color images expressed in movie costumes, and the history of western costumes and asian folk costumes in films. The class was counducted through various teaching methods, such as lectures, student's presentation of movie plots, and team discussions, which created a student-led class. The team presentations at the end of the term were intended to enhance the understanding of fashion through movies. The results of subjective lecture evaluation of "Fashion & Film" showed the most satisfaction with the communication with professor. Students said that it was good to understand fashion through film. They expressed a burden with the team project; however, they were satisfied with the team project outcomes. Students said that PowerPoint was used very effectively. On the other hand, there was an prevelent opinion that the content of PowerPoint and workbook did not match. To address this inconvenience, a textbook called "Fashion in Film" was published and used in the first semester of 2020. The multiple-choice evaluation showed that students were generally satisfied with the "Fashion & Film" class.