• 제목/요약/키워드: Filling time

Search Result 798, Processing Time 0.028 seconds

Behavioral Mechanism of Hybrid Model of ABG: Field Test (현장시험을 통한 ABG 하이브리드 공법의 거동 메커니즘 분석)

  • Seo, Hyung-Joon;Kim, Hyun-Rae;Jeong, Nam-Soo;Lee, In-Mo
    • Proceedings of the Korean Geotechical Society Conference
    • /
    • 2010.03a
    • /
    • pp.523-534
    • /
    • 2010
  • A hybrid system of soil-nailing and compression anchor is proposed in this paper; the system is composed of an anchor bar (installed at the tip) with two PC strands and a steel bar. After drilling a hole, installing proposed hybrid systems, and filling the hole with grouting material, prestress is applied to the anchor bar to restrict the deformation at the head and/or to prevent shallow slope failures. However, since the elongation rate of PC strand is much larger than that of steel bar, yield at the steel bar will occur much earlier than the PC strand. It means that the yield load of the hybrid system will be overestimated if we simply add yield loads of the two - anchor bar and PC strands. It might be needed to try to match the yielding time of the two materials by applying the prestress to the anchor bar. It means that the main purpose of applying prestress to the anchor bar should be two-fold: to restrict the deformation at the nail head; and more importantly, to maximize the design load of the hybrid system by utilizing load transfer mechanism that transfers the prestress applied at the tip to the head through anchor bar. In order to study the load transfer mechanism in a systematic way, in-situ pullout tests were performed with the following conditions: soil-nailing only; hybrid system with the variation of prestress stresses from 0kN to 196kN. It was found that the prestress applied to the anchor system will induce the compressive stress to the steel bar; it will result in decrease in the slope of load-displacement curve of the steel bar. Then, the elongation at which the steel bar will reach yield stress might become similar to that of PC strands. By taking advantage of prestress to match elongations at yield, the pullout design load of the hybrid system can be increased up to twice that of the soil-nailing system.

  • PDF

THE EXPERIMENTAL STUDY ON THE CHANGES OF CONDYLAR HEAD FOLLOWING UNILATERAL DISCECTOMY IN RABBIT (가토 편측 악관절원판 제거 후 하악 과두 변화에 관한 실험적 연구)

  • Park, Kwang-Jin;Kim, Kyung-Wook
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • v.18 no.4
    • /
    • pp.758-770
    • /
    • 1996
  • Discectomy is the oldest and most commonly performed operation for the painful temporomandibular joint with internal derangement. It is the one operation for which there are longest follow-up study, with Eriksson, Silver, and Tolvanen et al reporting good results in patients about 30 years after discectomy. About 80% to 90% of patients clinically experience relief from pain and dysfunction after discectomy, and interestingly, the results may improve with time. However such as Myrhaug found headache and Poswillo supposed pain and limitation of movement as postoperative complications, even though this operation had the longest follow-up term, several aspects of discectomy remain unclear. The controversies to discectomy for TMJ with pain and dysfunction have laid emphasis only upon clinical results, and then the histomorphological study was planned to evaluate the morphologic change of TMJ after discectomy. To clarify the nature of the change through an observation on the morphologic changes of articular cartilage and subchondral bone of the condyle resulting from experimental unilateral discectomy in rabbit, the author excised the left articular discs of 12 male rabbits(control 4 rabbits), weighing about 3kg, and at 1, 3, 6, 9 weeks following surgery, harvested both(left surgical site and right nonsurgical sits) TMJ. The specimens were examined with light microscope after H-E and MT stain and the obtained results were as follows. 1. Histopathological features showed thickening of articular zone and active proliferation of fibrocartilaginous zone associated with slight proliferative zone in surgical site than control group. Also replacement of chondrocytes in calcified cartilaginous zone into bone cells was observed. 2. There were thinning of thickness of each zone of articular cartilage except calcified cartilagnous zone was observed in nonsurgical site. 3. In MT stain of condylar trabeculae, there was increased calcification in nonsurgical site than control and surgical site and the degree of calcification was similar in surgical site and control group. 4. In both site of experimental group no features of degenerative changes were observed. From the above results, it is presumed that the morphologic changes of surgical site discectomy are compensatory remodeling process characterized by an hyperplastic reaction of the articular zone and fibrocartilaginous zone filling the void created by removing the disc, and the bone changes are secondary to changes in the cartilage. Increased degree of calcification seen in condylar trabeculae of nonsurgical site results from the excessive use of condyle of that site.

  • PDF

THE EFFECT OF LIGHT CURING METHODS AND RESIN ADHESIVES ON THE MICROLEAKAGE OF RESTORATIONS IN PRIMARY TEETH (광중합 방법 및 레진 접착제의 종류에 따른 유치 수복물의 미세누출)

  • Jeong, Young-Nam;Kim, Dae-Eop;Lee, Kwang-Hee
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.29 no.4
    • /
    • pp.592-599
    • /
    • 2002
  • Objective : The purpose of this study was to evaluate the effects of several light curing methods and several adhesives on the microleakage of composite resin restorations in primary teeth. Materials and methods : In 150 extracted human primary anterior teeth, O-shaped cavities were prepared in the labial surface ; the cavity diameter and depth were 1.6mm. The cavities were filled with light-activated composite resin, Compoglass. Four kinds of adhesives were used. Each filling materials were polymerized with three light cure methods. The restorations were polished using Sof-Lex discs(3M Co., USA). The samples were thermocycled 1,000 times between $5^{\circ}C$ and $55^{\circ}C$ with a 1-minute dwell time. Then, they were immersed in a 2% methylene blue solution(pH 7) for 12hours. Subsequently they were sectioned labio-lingually through the center of the restoration with a diamond saw at low speed with a water coolant, and evaluated by stereomicroscopy. Microleakage analyses were done, using scores from 0 to 4. Results : Results showed the least microleakage in Compoglass group(P<0.05). There were less microleakage in SBMP group among the adhesive groups, but no significant difference was observed(P>0.05). And there were no significant differences among the groups depending on curing methods(P>0.05).

  • PDF

Effect of Calcium Hydroxide on the Microhardness of Root Dentin of Primary Tooth (수산화칼슘 근관충전제의 적용이 유치 치근상아질의 미세경도에 미치는 영향)

  • Jun, Saeromi;Kim, Jong-Bin;Yoo, Seung-Hoon
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.40 no.3
    • /
    • pp.177-184
    • /
    • 2013
  • Calcium hydroxide mixture medicaments can nearly be considered to be the ideal primary tooth filling material. However, long-term application of calcium hydroxide combinations as an intra canal medicament softens dentin. The aim of this study was to evaluate the effect of calcium hydroxide on the microhardness of root dentin of primary tooth. For the study, 60 extractedprimary incisors were divided into 3 groups (no medicament, calcium hydroxide/iodorform mixture, and calcium hydroxide/distilled water mixture). After the cleansing and shaping of canals, calcium hydroxide medicaments were applied and stored for different periods of time (1, 7, 30, 90 days). The root was horizontally sectioned into 2 mm thick specimens and the microhardness was measured using Vickers microhardness tester. The results were as follows : Root dentin microhardness of primary teeth decreased with long term exposure to calcium hydroxide medicaments according to the experimental period and showed statistically significance (p < 0.05). Root dentin microhardness of primary tooth filled with calcium hydroxide mixed with distilled water showed more decrease than filled with Vitapex and showed statistically significance (p < 0.05). Root dentin microhardness of a control group without exposure to calcium hydroxide decreased according to the experimental period and showed statistically significance (p < 0.05).

Radiolysis of Paraffin Encapsulation Wax (파라핀 고화체의 방사선적 가수분해)

  • Kim, Chang-Lak;Lee, Myung-Chan;Park, Won-Jae;Suk, Tae-Won;Burns William G.
    • Journal of Radiation Protection and Research
    • /
    • v.20 no.4
    • /
    • pp.237-243
    • /
    • 1995
  • An estimate is made on the potential generation rate of H: from radiolysis of the Paraffin-wax encapsulant Proposed for the solidified liquid concentrate wasteform. The results show that the radiolytic Production of $H_2$ from paraffin-wax-encapsulated waste is dominated by the radiation energy released from $^{60}Co$. The radiolytic production of $H_2$ will proceed at an initial rate equivalent to aproximately $4.4{\times}10^2cm^3yr^1$ in 200 litre drums that are partly filled with 120 litres of encapsulated waste. The gas production rate will fall to a value of $7.2cm^3yr^1$ after 100 years. The lower flammable limit for $H_2$ in air will be reached in about 25 years and the lower explosive limit for $H_2$ in air would not be reached in 1000years. The timescale in which these safety-related limits are reached is strongly dependent on the level of filling of each waste drum. A reduction of the air space inside each drum would reduce the time required to reach the lower flammable limit.

  • PDF

One-stage Revision Anterior Cruciate Ligament Reconstruction Using Achilles Tendon Allograft (동종 아킬레스 건을 이용한 한 단계 전방 십자 인대 재 재건술)

  • Cho, Sung-Do;Ko, Sang-Hun;Park, Moon-Soo;Jung, Kwang-Hwan;Cha, Jae-Ryong;Gwak, Chang-Youl;Eo, Jin
    • Journal of the Korean Arthroscopy Society
    • /
    • v.10 no.2
    • /
    • pp.159-164
    • /
    • 2006
  • Purpose: To evaluate the clinical stability and function after one-stage revision anterior cruciate ligament (ACL) reconstruction using fresh-frozen Achilles tendon allograft Materials and Methods: Thirteen patients who underwent one-stage revision ACL reconstruction using Achilles tendon allograft could be evaluated. The average time from primary procedure to revision surgery was 61.8 months. The mean follow-up period was 38.4 months. The bone defects of pre-constructed femoral and tibial tunnels were filled with calcaneal bone attached to Achilles tendon and the new femoral and tibial tunnels were created. Evaluations included the causes of failure of primary ACL reconstruction, Lysholm knee score, Lachman test, pivot shift test and KT-1000 arthrometer measurement. Results: The most common causes of failure of ACL reconstruction were poor surgical techniques in 10 cases (76.9%). Ten patients (76.9%) were good or excellent on the Lysholm score. Twelve patients (92.3%) had negative or 1+firm end Lachman test. Eleven patients (84.6%) had negative pivot shift test. Nine patients (69.2%) had less than 3 mm difference of manual maximum by KT-1000 arthrometer. Conclusion: One-stage revision ACL reconstruction with fresh-frozen Achilles tendon allograft, creating new tunnels after filling bone defects, resulted in a reliable and predictable outcome in terms of stability.

  • PDF

The Size of Injection Wound, Tree Diameter, and Injection Wound Healing of a Tree - Response to Pospam Injection Wound - (흉고직경별 약제 수간주입구멍의 크기에 따른 주입구멍의 치유도 - 포스팜 수간주입구멍에 대한 반응 -)

  • Cha, Byeong Jin;Yun, Jeong Koo
    • Journal of Korean Society of Forest Science
    • /
    • v.84 no.1
    • /
    • pp.22-30
    • /
    • 1995
  • Responses of Pospam-injected chestnut and pine trees to drill wound were examined. Pospam was injected into the stem by just filling up the drill wound in September 10, 1993. The diameter of the injection wound were 0.5 and 1cm. DBH of chestnut trees and pine trees injected were 10, 15, 20 and 10, 20, 30cm, respectively. The results of tree response were examined in June, 1994. None of them showed any symptom of decay by the time. However, sapwood under the bark was remarkably discolored. The discoloration was more severe in 1cm-injection wound than in 0.5cm one. The severity of discoloration was not differed between species and among DBH applied. The sapwood split was longer in 1cm-injection wounded trees than in 0.5cm trees and longer in chestnut trees than in pine trees. From the split, callus grew out and almost closed the splits. In the trunk injection tested, the damage was mare severe in 1cm injection wound of chestnut trees than in any other combination.

  • PDF

TISSUE CHANGE AFTER EMBEDDING GELATIN MATRIX IMPLANT(FFIBREL®) IN SUBCUTANEOUS TISSUE OF RATS;HISTOLOGIC, IMMUNOHISTOCHEMICAL AND SCANNING ELECTRON MICROSCOPIC STUDY (백서의 피하조직에 Gelatin Matrix Implant (Fibrel®) 매식시 조직변화에 관한 연구)

  • Kim, Hong-Jin;Lee, Chong-Heon;Kim, Kyung-Wook
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • v.20 no.4
    • /
    • pp.341-354
    • /
    • 1998
  • GMI (Fibrel${(R)}$) is one of the dermal filling substances which have been successfully used for the treatment of depressed cutaneous scar and wrinkles. It's major components are; Gelatin powder, which provides a framework for the clot to form and remains stable under the scar, and ${\varepsilon}$-aminocaproic acid, which inhibits the production of fibrinolysin, and Plasma, which provides the necessary ingredients for collagen synthesis. GMI has advantages of low immunogenicity and increased longevity. It has been known to induce fibroblast activity and promote new collagen synthesis. We used 34 Sprague-Dawley rats which were bred under the same condition and duration. 18 of experimental animals were undergone cardiac puncture, and their blood were collected, centrifugated, and stored in freezer. Out of 16 animals, control group were injected with 2ml plasma into the subcutaneous tissue of Lt. scapular, while experimental group were implanted of 2 ml GMI into the Rt. same area. Experimental animals were sacrificed at the 3rd day, 5th day, 1st week and 2nd week respectively after implantation of GMI. To observe the histopathologic change of GMI and surrounding tissue reaction of GMI, we had examined with H&E staining, immunohistochemical staining with vimentin, ${\alpha}$-SMA, S-100 under LM and SEM. The obtained results were as follows ; 1. In LM study, the inflammatory cell infiltrations and granulation tissue formation were observed, and muscle tissues were well attached with adipose tissues in the control group. In the experimental group, inflammatory cell infiltrations had been observed by the 2nd week and irregular adipiose tissues and well differentiated mesenchymal tissues were examined. 2. In immunohistochemical study, the experimental group of ${\alpha}$-SMA study, there were a prominent positive response on endothelial development of granulation tissues and mesenchymal tissues compare with the control group. In vimentin study, positive response on mescenchymal fibroblast continued to 2nd week, but negative in the control group. In S-100 study, both groups were positively responded on irregular adipose tissues. 3. In SEM study, collagen fibers were embedded by the plasma by the 5th day in the control group, and in the 3rd day experiment GMI were resorved but communited with collagen fiber till the 1st week. Collagen fibers were infilt-rated into GMI at the 2nd week and the infilltrated GMI were conglomerated with the mature adipose cells and the collagen fibers. From the above results, GMI implantation in the subcutaneous tissue of Sprague-Dawley rat, the mild infiltration of inflammatory cells were showed till 2nd week and the granulation tissues were observed. GMI were nearly resorbed till 2nd week, but well attached with adipose tissue and collagen fibers. The endothelium and fibroblasts were actively proliferated. Adipose tissues and mesenchymal tissue cells were observed. As already expressed, GMI showed resorptive change in course of time without any early immune reaction, and seemed to induce fibroblast activity and promote new collagen synthesis.

  • PDF

Hydrothermal Cold-silver Mineralization of the Gajok Deposit in the Hongcheon Mining District, Korea (홍천 광화대, 가족 광상의 금.은 광화작용)

  • Pak, Sang-Joon;Choi, Seon-Gyu
    • Journal of the Mineralogical Society of Korea
    • /
    • v.21 no.1
    • /
    • pp.1-15
    • /
    • 2008
  • The Cretaceous Gajok gold-silver deposit within porphyry granite is located nearby the Cretaceous Pungam basin at the northeastern area in Republic of Korea. The Gajok gold-silver deposit is distinctively composed of a multiple-complex hydrothermal veins with comb, crustiform chalcedony quartz and vug textures, implying it was formed relatively shallower depth. The hypogene open-space filling veins could be divided into 5 paragenetic sequences, increasing tendency of Ag-rich electrum and Ag-phases with increasing paragenetic time. Electrum with high gold contents (${\sim}50$ atomic % Au) as well as sphalerite with high FeS contents (${\sim}6$ mole % FeS) are representative ore minerals in the middle stage. The late stage is characterized by silver-phase such like native silver and/or argentite, coexisting with Ag-rich electrum ($10{\sim}30$ atomic % Au) and Fe-poor sphalerite (< 1 mole % FeS). The ore-forming fluids evolution started at relatively high temperature and salinity (${\sim}360^{\circ}C$, ${\sim}7\;wt.%$ eq. NaCl) and were evolved by dilution and mixing mechanisms on the basis of fluid inclusion study. The gold-silver mineralization proceeded from ore-forming fluids containing greater amounts of less-evolved meteoric waters(${\delta}^{18}O$; $-0.6{\sim}-6.7\;%o$). These results imply that gold-silver mineralization of the Cretaceous Gaiok deposit formed at shallow-crustal level and could be categorized into low-sulfidation epithermal type, related to Cretaceous igneous activity.

A Micro Finite Element Analysis on Effects of Altering Monomer-to-Powder ]Ratio of Bone Cement During Vertebroplasty (골 시멘트 중합 비율 변경이 척추성형술 치료에 미치는 영향에 대한 비교 분석)

  • 김형도;탁계래;김한성
    • Journal of Biomedical Engineering Research
    • /
    • v.23 no.6
    • /
    • pp.451-458
    • /
    • 2002
  • Osteoporosis is a systemic skeletal disease caused by low bone mass and the decrease of bone density in the microstructure of trabecular bone. Drug therapy(PTH Parathyroid hormone) may increase the trabecular thickness and thus bone strength. Vertebroplasty is a minimally invasive surgery foy the treatment of osteoporotic vertebral compression fracture. This Procedure includes Puncturing vertebrae and filling with Polymethylmethacrylate(PMMA). Although altering recommended monomer-to-Powder ratio affects material properties of bone cement, clinicians commonly alter the mixture ratio to decrease viscosity and increase the working time. The Purposes of this study were to analyze the effect of 4he monomer-to-powder ratio on the mechanical characteristics of trabecular. In this paper, the finite element model of human vertebral trabecualr bone was developed by modified Voronoi diagram, to analyze the relative effect of hormone therapy and vertebroplasty at the treatment of osteoporotic vertebrae. Trabeuclar bone models for vertebroplasty with varied monomer-to-Powder ratio(0.40∼1.07 ㎖/g) were analyzed. Effective modulus and strength of bone cement-treated models were approximately 60% of those of intact models and these are almost twice the values of hormone-treated models. The bone cement models with the ratio of 0.53㎖/g have the maximum modulus and strength. For the ratio of 1.07㎖/g, the modulus and strength were minimum(42% and 49% respectively) but these were greater than those for drug therapy. This study shows that bone cement treatment is more effective than drug therapy. It is found that in vertebroplasty, using a monomer-to-powder ratio different from that recommended by manufacturer nay significantly not only reduce the cement's material Properties but also deteriorate the mechanical characteristics of osteoporotic vertebrae.