• Clinical Endoscopy
• /
• v.57 no.2
• /
• pp.209-216
• /
• 2024

Background/Aims: Endoscopic ultrasonography-guided gastrojejunostomy is a minimally invasive method for the management of gastric outlet obstruction. Conventionally, a lumen-apposing metal stent (LAMS) is used to create an anastomosis. However, LAMS is expensive and not widely available. In this report, we described a tubular fully covered self-expandable metallic stent (T-FCSEMS) for this purpose. Methods: Twenty-one patients (15 men [71.4%]; median age, 66 years; range, 40-87 years) were included in this study. A total of 19 malignant (12 pancreatic, 6 gastric, and 1 metastatic rectal cancer) and 2 benign cases were observed. The proximal jejunum was punctured with a 19 G needle. The stomach and jejunum walls were dilated with a 6 F cystotome, and a 20×80 mm polytetrafluoroethylene T-FCSEMS (Hilzo) was deployed. Oral feeding was initiated after 12 to 18 hours and solid foods after 48 hours. Results: The median procedure time was 33 minutes (range, 23-55 minutes). After two weeks, 19 patients tolerated oral feeding. In patients with malignancy, the median survival time was 118 days (range, 41-194 days). No serious complications or deaths occurred. All patients with malignancy tolerated oral food intake until they expired. Conclusions: T-FCSEMS is safe and effective. This stent should be considered as an alternative to LAMS for gastric outlet obstruction.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.1
• /
• pp.93-100
• /
• 2012

Objective: This study is to review the current state of services offered to pharmacy users, and develop a service design converging a prescription service and a smart phone application service in order to enhance patients' experience at pharmacies and home. Background: Under the new medical system; separation of prescribing and dispensing drugs, a doctor writes a prescription to their patients and patients have their prescription filled at the pharmacy. As the number of flue, allergy and atopy patients has increased, waiting lines have been longer at pharmacies. Besides, the current medical service system lacks of providing proper information on prescribed pills to patients. There are already services offered during waiting times such as offering free drinks, magazines or suggesting general drugs which you can buy without prescription, however they neither cover the current medical service's shorts nor shorten the waiting time. Method: I researched objective and perceived waiting times reduction methods, the current service status at pharmacies, and the government's policy direction in a medical service. Also, I observed a patient's journey from the hospital to pharmacy and then home. I examined the circumstance at pharmacies, patients' behaviors and their thoughts during their journey, and extracted three main goals to design a service in order to help patients have positive perception during the waiting time; (1) to reduce the perceived time by the way of visualizing time and offering readings about what patients consider necessary, (2) to educate patients what they are into and how to get through, (3) to establish trust among patients, doctors and pharmacists. Based on three goals, I designed a structure and a wireframe for a new service application of smart phones. Results: With a new service design for pharmacy users, users can track their medical record and visit the information about their current medical treatments anytime. Also the service helps patients build reliable relationships with doctors and pharmacists. Conclusion: Experience is not just an activity but series of multiple activities. The serving range of a medical service should not be determined by stakeholders but user's holistic experience. By approaching a service design with a holistic vision, it can enrich not only a temporary experience but also a whole life well being. Application: Since there are already many service applications advising patients about their illness and finding right doctors, this service design is focused on the experience from getting a prescription till feeling better. The next move is to combine those two parts medical services and design an integrated service application. As a prescription is going to be coded in numbers, we might consider to design an un-attended pharmacy which can shorten huge amount of time for filling prescriptions.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.3
• /
• pp.229-236
• /
• 2011

ProRoot MTA(Dentsply Tulsa, U.S.A) which has similar component with Portland cement has setting expansion character and long setting time. Excessive expansion can cause fracture at the apical portion of the root and decreasing of volume stability. And the long setting time makes additional visits for crown restoration and slow setting process of this material can change physical properties itself. In this study, among requirements of root canal filling material(KS P ISO 6876) which is revised at 2008, we investigated the setting time and setting expansion. Objects are recently developed OrthoMTA(BioMTA, Korea), conventional ProRoot white MTA(Dentsply Tulsa, U.S.A) and White portland cement(Union, Korea). The results in setting expansion, OrthoMTA was $0.08{\pm}0.02%$, ProRoot white MTA and White portland cement were each $0.28{\pm}0.06$, $0.80{\pm}0.25%$(p<0.05). The results in setting time, OrthoMTA, ProRoot white MTA, White portland cement were each $307.78{\pm}3.83$ min, $150.44{\pm}2.35$ min, $235.33{\pm}9.07$ min(p<0.05).

• Korean Journal of Dental Materials
• /
• v.45 no.4
• /
• pp.311-320
• /
• 2018

The purpose of this study is to evaluate the flow ability of the thermoplasticized Gutta Percha in different temperatures. Four Gutta Percha products were classified by its hardness (soft, medium, and hard) and were experimented by the Rheometer (Melt flow indexer MFI-10, DAVENPORT, England) measuring apparatus, in $(23{\pm}2)^{\circ}C$, and in a relative humidity of ($50{\pm}5$) %, following the guidelines of ISO 1133-1:2011. The heating temperature ranged from $108^{\circ}C$, $160^{\circ}C$ to $200^{\circ}C$, and the load at 2.16 kg and 3.8 kg. The Gutta Percha was cut in 5 mm to be suitable for the rheometer pressurization process. After the experiment was conducted with a preheating time of 5 minutes, a cutting time of 5-240 seconds, and a sample of 10 grams, the Gutta Percha did not show any changes in fluidity for $108^{\circ}C$, $160^{\circ}C$, but showed a change in its flow ability in $200^{\circ}C$. Also, the Gutta Percha did not show any changes in its fluidity when it was pressurized by 2.16 and 3.8 kilograms. Therefore, this experiment shows that the heating temperature and the cut-off time showed a significance while measuring the melt flow rate.

• Investigative Magnetic Resonance Imaging
• /
• v.13 no.1
• /
• pp.31-39
• /
• 2009

Purpose : This study proposes the keyhole method in order to improve the time resolution of the proton resonance frequency(PRF) MR temperature monitoring technique. The values of Root Mean Square (RMS) error of measured temperature value and Signal-to-Noise Ratio(SNR) obtained from the keyhole and full phase encoded temperature images were compared. Materials and Methods : The PRF method combined with GRE sequence was used to get MR temperature images using a clinical 1.5T MR scanner. It was conducted on the tissue-mimic 2% agarose gel phantom and swine's hock tissue. A MR compatible coaxial slot antenna driven by microwave power generator at 2.45GHz was used to heat the object in the magnetic bore for 5 minutes followed by a sequential acquisition of MR raw data during 10 minutes of cooling period. The acquired raw data were transferred to PC after then the keyhole images were reconstructed by taking the central part of K-space data with 128, 64, 32 and 16 phase encoding lines while the remaining peripheral parts were taken from the 1st reference raw data. The RMS errors were compared with the 256 full encoded self-reference temperature image while the SNR values were compared with the zero filling images. Results : As phase encoding number at the center part on the keyhole temperature images decreased to 128, 64, 32 and 16, the RMS errors of the measured temperature increased to 0.538, 0.712, 0.768 and 0.845$^{\circ}C$, meanwhile SNR values were maintained as the phase encoding number of keyhole part is reduced. Conclusion : This study shows that the keyhole technique is successfully applied to temperature monitoring procedure to increases the temporal resolution by standardizing the matrix size, thus maintained the SNR values. In future, it is expected to implement the MR real time thermal imaging using keyhole method which is able to reduce the scan time with minimal thermal variations.

• Applied Biological Chemistry
• /
• v.27 no.3
• /
• pp.169-173
• /
• 1984

In order to determine the optimum harvesting time based on grain filling and physico-chemical qualities for malting, three cultivars were harvested at every five days from 30th day after heading date at two experimental sites in the southern part of Korea. Starch accumulation and kernel weight increment were remarkable until 45th day after heading, but negligible after that. Content of ash, crude protein and polyphenolics and ${\alpha}-amylase$ activity decreased with maturation of grains and reached to the lowest value at 45th day after heading date. Germinative energy and capacity were good enough for malting from 40th day after heading date. The optimum harvesting time were estimated at 45th day after heading date in the increment of starch accumulation and kernel weight. At this time matured and immatured kernels were in the ratio 93 : 7. However, it is estimated that early harvesting time was at 40th day after heading date.

• The Korean Journal of Urological Oncology
• /
• 제15권3호
• /
• pp.178-186
• /
• 2017

Purpose: Poloxamer 407 (P407) thermo-sensitive hydrogel formulations were developed to enhance the retention time in the urinary bladder after intravesical instillation. Materials and Methods: P407 hydrogels (P407Gels) containing 0.2 w/w% fluorescein isothiocyanate dextran (FD, MW 4 kDa) as a fluorescent probe were prepared by the cold method with different concentrations of the polymer (20, 25, and 30 w/w%). The gel-forming capacities were characterized in terms of gelation temperature (G-Temp), gelation time (G-Time), and gel duration (G-Dur). Homogenous dispersion of the probe throughout the hydrogel was observed by using fluorescence microscopy. The in vitro bladder simulation model was established to evaluate the retention and drug release properties. P407Gels in the solution state were administered to nude mice via urinary instillation, and the in vivo retention behavior of P407Gels was visualized by using an in vivo imaging system (IVIS). Results: P407Gels showed a thermo-reversible phase transition at $4^{\circ}C$ (refrigerated; sol) and $37^{\circ}C$ (body temperature; gel). The G-Temp, G-Time, and G-Dur of FD-free P407Gels were approximately $10^{\circ}C-20^{\circ}C$, 12-30 seconds, and 12-35 hours, respectively, and were not altered by the addition of FD. Fluorescence imaging showed that FD was spread homogenously in the gelled P407 solution. In a bladder simulation model, even after repeated periodic filling-emptying cycles, the hydrogel formulation displayed excellent retention with continuous release of the probe over 8 hours. The FD release from P407Gels and the erosion of the gel, both of which followed zero-order kinetics, had a linear relationship ($r^2=0.988$). IVIS demonstrated that the intravesical retention time of P407Gels was over 4 hours, which was longer than that of the FD solution (<1 hour), even though periodic urination occurred in the mice. Conclusions: FD release from P407Gels was erosion-controlled. P407Gels represent a promising system to enhance intravesical retention with extended drug delivery.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.4
• /
• pp.1-10
• /
• 2018

Although the soil nailing method is generally used as a gravity grouting, the development and application of pressurized grouting method has recently increased to address the problem of joint generation and filling due to grouting. Pressurized grouting of the soil nailing method is generally used in combination with ordinary portland cement and water. In the field, the cement is mixed with the rapid setting cement to reduce curing time because ordinary portland cement takes more than 10 days to satisfy the required strength. In this study, uniaxial compression tests and laboratory tests were carried out to confirm the efficiency of the grouting material according to the mixing ratio of rapid setting cement. The mixing ratio of 30% grouting satisfies the required strength within 7 days and satisfies the optimum gel time. As a result of the laboratory test with granite weathered soil, the reinforcing effect was confirmed to be 1.5 times as compared with the gravity type at an injection time of 10 seconds and a strain of 15%. The friction resistance increases linearly with the increase of the injection time, but it is confirmed that the friction resistance decreases due to the hydraulic fracturing effect at the injection time exceeding the limit injection pressure. Numerical analysis was performed to compare the stability of slopes not reinforced with slopes reinforced with gravity and pressurized soil nailing.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.43 no.4
• /
• pp.365-373
• /
• 2016

Composites are the most useful restorative material. However, composites have some disadvantages such as polymerization shrinkage, long working time, and susceptibility to water and contamination, which are stood out more especially when treating children. To solve these problems, bulk-fill composites have been developed. The aim of this study is to compare mechanical properties of bulk-fill and conventional composites. Bulk-fill composites (SureFil SDR flow (SDR), Tetric N-Ceram bulk fill (TBF)) and conventional composites (Filtek Z-350 (Z-350), Unifil Flow (UF), Unifil Loflo Plus (UL)) were used. The Vickers hardness tester was used to measure the microhardness of materials, and Fourier transform infrared spectroscopy was used to measure the degree of conversion. Polymerization shrinkage was measured by using a linometer. Flexural and compressive properties were measured by using the universal testing machine. Data were statistically analyzed by ANOVA and Scheffe's post hoc test. The level of significance was set to p < 0.05. Most conventional composites showed higher microhardness than bulk-fill composites. However, bulk-fill composites showed a higher top/bottom microhardness ratio than conventional composites. Bulk-fill composites showed a higher top/bottom degree of conversion ratio than conventional composites. The polymerization shrinkage was highest in UL and lowest in Z-350. The polymerization shrinkage of flowable composites was higher than that of non flowable composites. The compressive properties were highest in Z-350 and lowest in SDR and UL. In terms of flexural properties, Z-350 was the highest. However, none of the bulk-fill composites exhibited mechanical properties as good as those of conventional composites. Nonetheless, the ratio of microhardness and degree of conversion, which are important properties of bulk filling, were higher in bulk-fill composites. Therefore, the bulk-fill composites might be considered suitable restorative materials in pediatric dentistry.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.2
• /
• pp.158-164
• /
• 1985

The objective of the study was to investigate growth pattern of capsule and grain to improve grain filling during the grain filling period in sesame. Growth patterns of capsule and grain from anthesis to maturity were measured and compared by different plant types. Growth of capsule length started to grow just after anthesis and recorded maximum point at 35 days after flowering. and then decreased gradually. Growth of higher part capsule was worse than lower and middle capsules. Capsule growth of 2 carpels 4 loculi type showed better than 4 carpels 8 loculi type and BTB (branch, 3 capsules, 2 carpels, 4 loculi) type showed good growth due to its small reduction of higher part capsule length compared to those of lower and middle parts. The order of growth of capsule length were considered to be center capsule in main stem> center capsule in branch> side capsule in main stem> side capsule in branch. Growth of capsule width also showed maximum at 35 days after anthesis and then reduced. The order of growth of capsule width were lower part> middle part> higher part. Higher part capsule width of 3 capsules 4 carpels 8 loculi type showed serious decrease at late reproductive growth stage same as those of capsule length. Fresh one thousand grain weight showed peak at 35 days after anthesis and then reduced. The order of grain growth were appeared as lower part> middle part> higher part. Growth of fresh one thousand grain weight of branch and side capsule were lower than those of main stem center capsule, and 4 carpels 8 loculi type was deeply decreased at late flowering time in higher part such as the growth of capsule length and width. BTB (branch, 3,2/4) type didn't show much decrease in higher part fresh grain weight compared to those of other plant types in spite of its profitable character of lots of sink capacity. BTB type appeared to be ideal for improving grain filling and yield productivity in growing sesame in Korea.