• Korean Journal of Environment and Ecology
• /
• v.26 no.6
• /
• pp.892-901
• /
• 2012

The purpose of this research was to analyze fish fauna, distribution patterns, and fish community structures in the Juksan-Weir regions of upper weir(R-UW) and lower weir(R-LW), which was constructed in 2011 on Yeongsan River watershed. Our outcomes will provide valuable information in the impact analysis of weir constructions next decades, even if the current research is limited to distributions and fauna studies of fishes. The fishes observed were 8 family and 30 species in all the sites, and the number of the species in the regions of R-UW and R-LW was 23(938 individuals) and 27(1,680 individuals), respectively, indicating greater abundance in the lower region of Juksan-Weir. Most dominant species was Opsarichthys uncirostris amurensis with relative abundance of 42%, and this species had greater abundance in the R-LW(49%) than in the R-UW(30%). Coilia nasus, was the migratory fish sampled in this region and had no differences of abundance between the two regions. The extic species observed were Carassius cuvieri, Lepomis macrochirus, and Micropterus salmoides. The two formers of Carassius cuvieri(1.2%) and Lepomis macrochirus(3.7%) dominated in the R-UW, whereas Micropterus salmoides had greater dominance in the region of R-LW. According to tolerance guild analysis, the proportion of sensitive species ranged from 0.4 to 0.5%, and that of tolerant species ranged from 65% to 70%, implying a severe pollution of nutrients and organic matters in the water body. In the mean time, according to trophic guild analysis, the proportion of carnivores(57 - 77%) was evidently higher than that of insectivores(10 - 20%), indicating a dominance of the carnivores. Especially, high abundance of the bass, exotic species, may disturb the fish overall food chain, so the efficient ecosystem management may be required for the conservation of endemic species. When we examined fish data files of last 60 years, the species of Culter brevicauda, designated as endangered species, was observed firstly in our research area and the total number was 5 individuals(0.2% of the total). So, this region observed should be conserved as a protection zone and further monitoring studies should be done in the future.

• Journal of the Korean Society of Groundwater Environment
• /
• v.5 no.3
• /
• pp.129-140
• /
• 1998

In this study two sites were selected to investigate groundwater contamination and spatial relationship between pollution level and its source. One is the Asan area, agricultural district where pollution sources are scattered. The other is the Gurogu area of Seoul city, industrial district where industrial complex and residential areas are located. Groundwater samples collected from these districts were analysis for chemical constituents. The attribute value files of the chemical constituents of groundwater and the spatial layers have been constructed and the pollution properties have been investigated to find out spatial relationships between the groundwater constituents and pollution sources using CIS. Relatively high contents of Si and HCO$_3$ in groundwater from the Asan area reflect the effect of water-rock interaction, whereas high contents of Cl, NO$_3$, SO$_4$and Ca in groundwater from the Gurogu area are due to the pollution of various sources. Pollution over the critical level of Korean Dinking Water Standard has been investigated from 15 sampling sites out of 40 in the Asan area, and 33 sampling sites out of 51 in the Gurogu area. There is pollution of NO$_3$, Cl, Fe, Mn, SO$_4$and Zn in groundwater from the Gurogu area, and that of NO$_3$, SO$_4$and Zn in groundwater from the Asan area. Principal pollution in both areas is NO$_3$contamination. Deep groundwater from the Asan area is not contaminated with NO$_3$except for one site and most of shallow groundwater near the potential point sources such as factory and stock farm is contaminated seriously. Groundwater from the Gurogu area has been already polluted seriously considering the fact of contamination of deep groundwater. This study reports a spatial relationship between the pollution level and pollution source using GIS.

• Information Systems Review
• /
• v.16 no.3
• /
• pp.49-68
• /
• 2014

These days, consumers have increasingly preferred to digital real-time streamlining and downloading to listen to music because this is convenient and affordable for the consumers. Accordingly, sales of music in compact disk formats have steadily declined. In this regards, online digital music has become a new communication channel to listen musics, where digital files can be delivered over various online networks to people's computing devices. The majority of online digital music distributors has Music Recommender Systems for sales of digital music on their websites. Music Recommender Systems are parts of information filtering systems that provide the ratings or preferences that users give to music. Korean online digital music distributors have Music Recommender Systems. But those online music distributors didn't provide any rules or clear procedures that recommend music. Therefore, we raise important questions as follows: "Is Music Recommender Systems Fair?", "What is the impact of Music Recommender Systems on online music rankings and sales?" While previous studies have focused on usefulness of Music Recommender Systems, this study investigates not only fairness of Current Music Recommender Systems but also Relationship between Music Recommender Systems and online Music Charts. This study examines these issues based on Bandwagon effect, ranking effect, Slot effect theories. For our empirical analysis, we selected the most famous five online digital music distributors in terms of market shares. We found that all recommended music is exposed to the top of 'daily music charts' in online digital music distributors' websites. We collected music ranking data and recommended music data from 'daily music chart' during a one month. The result shows that online music recommender systems are not fair, since they mainly recommend particular music that supported by a specific music production company. In addition, the recommended music are always exposed to the top of music ranking charts. We also find that recommended music usually appear at the top 20 ranking charts within one or two days. Also, the most music in the top 50 or 100 ranks are the recommended music. Moreover, recommended music usually remain the ranking charts more than one month while non-recommended music often disappear at the ranking charts within two week. Our study provides an important implication to online music industry. Because music recommender systems and music ranking charts are closely related, music distributors may improperly use their recommender systems to boost the sales of music that related to their own companies. Therefore, online digital music distributor must clearly announce the rules and procedures about music recommender systems for the better music industry.

• Restorative Dentistry and Endodontics
• /
• v.35 no.4
• /
• pp.267-272
• /
• 2010

Screw-in effect is one of the unintended phenomena that occurs during the root canal preparation with nickel-titanium rotary files. The aim of this study was to compare the screw-in effect among various nickel-titanium rotary file systems. Six different nickel-titanium rotary instruments (ISO 20/.06 taper) were used: $K3^{TM}$ (SybronEndo, Glendora, CA, USA), $M_{two}$ (VDW GmbH, Munchen, Germany), NRT with safe-tip and with active tip (Mani Inc., Shioya-gun, Japan), ProFile$^{(R)}$ (Dentsply-Maillefer, Ballaigues, Switzerland) and ProTaper$^{(R)}$ (Dentsply-Maillefer, Ballaigues, Switzerland). For ProTaper$^{(R)}$, S2 was selected because it has size 20. Root canal instrumentations were done in sixty simulated single-curved resin root canals with a rotational speed of 300 rpm and single pecking motion. A special device was designed to measure the force of screw-in effect. A dynamometer of the device recorded the screw-in force during simulated canal preparation and the recorded data was stored in a computer with designed software (LCV-USE-VS, Lorenz Messtechnik GmbH, Alfdorf, Germany). The data were subjected to one-way ANOVA and Tukey's multiple range test for post-hoc test. P value of less than 0.05 was regarded significant. ProTaper$^{(R)}$ produced significantly more screw-in effects than any other instruments in the study (p < 0.001). $K3^{TM}$ produced significantly more screw-in effects than $M_{two}$, and ProFile$^{(R)}$ (p < 0.001). There was no significant difference among $M_{two}$, NRT, and ProFile$^{(R)}$ (p > 0.05), and between NRT with active tip and NRT with safe one neither (p > 0.05). From the result of the present study, it was concluded, therefore, that there seems significant differences of screw-in effect among the tested nickel-titanium rotary instruments. The radial lands and rake angle of nickel-titanium rotary instrument might be the cause of the difference.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.3
• /
• pp.213-220
• /
• 2014

This is the study to conduct the topographical analysis using the orthophotographic data from the waypoint flight using the UAV and constructed the system required for the automatic waypoint flight using the multicopter.. The results of the waypoint photographing are as follows. First, result of the waypoint flight over the area of 9.3ha, take time photogrammetry took 40 minutes in total. The multicopter have maintained the certain flight altitude and a constant speed that the accurate photographing was conducted over the waypoint determined by the ground station. Then, the effect of the photogrammetry was checked. Second, attached a digital camera to the multicopter which is lightweight and low in cost compared to the general photogrammetric unmanned airplane and then used it to check its mobility and economy. In addition, the matching of the photo data, and production of DEM and DXF files made it possible to analyze the topography. Third, produced the high resolution orthophoto(2cm) for the inside of the river and found out that the analysis is possible for the changes in vegetation and topography around the river. Fourth, It would be used for the more in-depth research on landscape analysis such as terrain analysis and visibility analysis. This method may be widely used to analyze the various terrains in cities and rivers. It can also be used for the landscape control such as cultural remains and tourist sites as well as the control of the cultural and historical resources such as the visibility analysis for the construction of DSM.

• Journal of radiological science and technology
• /
• v.39 no.4
• /
• pp.577-585
• /
• 2016

The purpose of this study is to evaluate the accuracy of beam delivery QA software using the MLC dynalog file, about the VMAT plan with AAPM TG-119 protocol. The Clinac iX with a built-in 120 MLC was used to acquire the MLC dynalog file be imported in MobiusFx(MFX). To establish VMAT plan, Oncentra RTP system was used target and organ structures were contoured in Im'RT phantom. For evaluation of dose distribution was evaluated by using gamma index, and the point dose was evaluated by using the CC13 ion chamber in Im'RT phantom. For the evaluation of point dose, the mean of relative error between measured and calculated value was $1.41{\pm}0.92%$(Target) and $0.89{\pm}0.86%$(OAR), the confidence limit were 3.21(96.79%, Target) and 2.58(97.42%, OAR). For the evaluation of dose distribution, in case of $Delta^{4PT}$, the average percentage of passing rate were $99.78{\pm}0.2%$(3%/3 mm), $96.86{\pm}1.76%$(2%/2 mm). In case of MFX, the average percentage of passing rate were $99.90{\pm}0.14%$(3%/3 mm), $97.98{\pm}1.97%$(2%/2 mm), the confidence limits(CL) were in case of $Delta^{4PT}$ 0.62(99.38%, 3%/3 mm), 6.6(93.4%, 2%/2 mm), in case of MFX, 0.38(99.62%, 3%/3 mm), 5.88(94.12%, 2%/2 mm). In this study, we performed VMAT QA method using dynamic MLC log file compare to binary diode array chamber. All analyzed results were satisfied with acceptance criteria based on TG-119 protocol.

• Korean Security Journal
• /
• no.18
• /
• pp.119-141
• /
• 2009

Administrative execution by proxy is one of forced executions of administration and is also called as "enforced execution by proxy" in which administration institutions or the third party executes by proxy on behalf of parties who did not execute obligations under administration law and files claims to compensate expenses required in the proxy execution. Despite the actual site of administrative execution by law, social problems are generated because various violence and behaviors of infringement of human rights between executer and obligator are rampant and thus causing human damages since forced execution by physical force is carried out and cases of police indictments and petition to human rights committee are gradually increasing. Majority of people mobilized in this actual site of violence are supplied by private security companies which provide service contract and mobilization of people without qualification of guards or security service and irrational execution by proxy and violent actions by so-called service hooligans connected to violence organizations are now becoming social issues. In these actual sites of violence, structurally very complicated problems such as economic rights, right of residence, struggle for living, and intervention by outsiders are contained. This thesis has analyzed causes of outbreaks of violence and discussed about improvement countermeasure by paying attention to mobilization of people by private security companies. As the result, through revision and improvement of laws and systems, execution institution and policemen must be present at actual sites of execution by proxy to control physical execution of private security companies to be carried out legally and when violent collisions are occurring, it shall be stipulated that police should immediately intervene. Practices of execution by proxy of execution administration institutions shall be avoided and causes of occurrences of violence shall be eliminated by discrete decisions of execution by proxy, elimination of service contract conditions focused on accomplishments, and stipulation of responsibility of execution institutions when problems occur. Practices of solving petitions through collective actions of obligators shall be eliminated and strict enforcement of laws such as disturbance of official execution or compensation claims for expenses of execution by proxy must be carried out and intervention by the third parties must be intercepted. Mobilization of manpower by security companies shall be limited to people with prior registration who have acquired and finished qualification and education by security business law and before putting them on actual sites, it shall be obliged that execution plan with clear written records of working location, mission, and work rules must be submitted in advance to police station in charge and also they must be controlled to follow laws and statutes such as uniform and equipments. In addition, personal criminal responsibility for violent actions must be clearly stipulated and advanced securing soundness of security companies such as limits of service contracts with records of accidents is required. Order placement behaviors of special organizations under the pretext of rehabilitation business must be eradicated and companies with capability and strong intention of observation of laws must be able to receive orders by intercepting chains of contracts and sub-contracts. Issues of improvement countermeasure of social problem, living, and compensation including rights of residence and environment are excluded from the discussion.

• Journal of Internet Computing and Services
• /
• v.19 no.1
• /
• pp.77-86
• /
• 2018

For the past few years, KISTI has been servicing an online simulation execution platform, called EDISON, allowing users to conduct simulations on various scientific applications supplied by diverse computational science and engineering disciplines. Typically, these simulations accompany large-scale computation and accordingly produce a huge volume of output data. One critical issue arising when conducting those simulations on an online platform stems from the fact that a number of users simultaneously submit to the platform their simulation requests (or jobs) with the same (or almost unchanging) input parameters or files, resulting in charging a significant burden on the platform. In other words, the same computing jobs lead to duplicate consumption computing and storage resources at an undesirably fast pace. To overcome excessive resource usage by such identical simulation requests, in this paper we introduce a novel framework, called IceSheet, to efficiently manage simulation data based on execution metadata, that is, provenance. The IceSheet framework captures and stores each provenance associated with a conducted simulation. The collected provenance records are utilized for not only inspecting duplicate simulation requests but also performing search on existing simulation results via an open-source search engine, ElasticSearch. In particular, this paper elaborates on the core components in the IceSheet framework to support the search and reuse on the stored simulation results. We implemented as prototype the proposed framework using the engine in conjunction with the online simulation execution platform. Our evaluation of the framework was performed on the real simulation execution-provenance records collected on the platform. Once the prototyped IceSheet framework fully functions with the platform, users can quickly search for past parameter values entered into desired simulation software and receive existing results on the same input parameter values on the software if any. Therefore, we expect that the proposed framework contributes to eliminating duplicate resource consumption and significantly reducing execution time on the same requests as previously-executed simulations.

• Fiber Technology and Industry
• /
• v.2 no.4
• /
• pp.490-508
• /
• 1998

One of the latest fields of research in the area of output devices is tactual display devices [13,31]. These tactual or haptic devices allow the user to receive haptic feedback output from a variety of sources. This allows the user to actually feel virtual objects and manipulate them by touch. This is an emerging technology and will be instrumental in enhancing the realism of wearable augmented environments for certain applications. Tactual displays have previously been used for scientific visualization in virtual environments by chemists and engineers to improve perception and understanding of force fields and of world models populated with the impenetrable. In addition to tactual displays, the use of wearable audio displays that allow sound to be spatialized are being developed. With wearable computers, designers will soon be able to pair spatialized sound to virtual representations of objects when appropriate to make the wearable computer experience even more realistic to the user. Furthermore, as the number and complexity of wearable computing applications continues to grow, there will be increasing needs for systems that are faster, lighter, and have higher resolution displays. Better networking technology will also need to be developed to allow all users of wearable computers to have high bandwidth connections for real time information gathering and collaboration. In addition to the technology advances that make users need to wear computers in everyday life, there is also the desire to have users want to wear their computers. In order to do this, wearable computing needs to be unobtrusive and socially acceptable. By making wearables smaller and lighter, or actually embedding them in clothing, users can conceal them easily and wear them comfortably. The military is currently working on the development of the Personal Information Carrier (PIC) or digital dog tag. The PIC is a small electronic storage device containing medical information about the wearer. While old military dog tags contained only 5 lines of information, the digital tags may contain volumes of multi-media information including medical history, X-rays, and cardiograms. Using hand held devices in the field, medics would be able to call this information up in real time for better treatment. A fully functional transmittable device is still years off, but this technology once developed in the military, could be adapted tp civilian users and provide ant information, medical or otherwise, in a portable, not obstructive, and fashionable way. Another future device that could increase safety and well being of its users is the nose on-a-chip developed by the Oak Ridge National Lab in Tennessee. This tiny digital silicon chip about the size of a dime, is capable of 'smelling' natural gas leaks in stoves, heaters, and other appliances. It can also detect dangerous levels of carbon monoxide. This device can also be configured to notify the fire department when a leak is detected. This nose chip should be commercially available within 2 years, and is inexpensive, requires low power, and is very sensitive. Along with gas detection capabilities, this device may someday also be configured to detect smoke and other harmful gases. By embedding this chip into workers uniforms, name tags, etc., this could be a lifesaving computational accessory. In addition to the future safety technology soon to be available as accessories are devices that are for entertainment and security. The LCI computer group is developing a Smartpen, that electronically verifies a user's signature. With the increase in credit card use and the rise in forgeries, is the need for commercial industries to constantly verify signatures. This Smartpen writes like a normal pen but uses sensors to detect the motion of the pen as the user signs their name to authenticate the signature. This computational accessory should be available in 1999, and would bring increased peace of mind to consumers and vendors alike. In the entertainment domain, Panasonic is creating the first portable hand-held DVD player. This device weight less than 3 pounds and has a screen about 6' across. The color LCD has the same 16:9 aspect ratio of a cinema screen and supports a high resolution of 280,000 pixels and stereo sound. The player can play standard DVD movies and has a hour battery life for mobile use. To summarize, in this paper we presented concepts related to the design and use of wearable computers with extensions to smart spaces. For some time, researchers in telerobotics have used computer graphics to enhance remote scenes. Recent advances in augmented reality displays make it possible to enhance the user's local environment with 'information'. As shown in this paper, there are many application areas for this technology such as medicine, manufacturing, training, and recreation. Wearable computers allow a much closer association of information with the user. By embedding sensors in the wearable to allow it to see what the user sees, hear what the user hears, sense the user's physical state, and analyze what the user is typing, an intelligent agent may be able to analyze what the user is doing and try to predict the resources he will need next or in the near future. Using this information, the agent may download files, reserve communications bandwidth, post reminders, or automatically send updates to colleagues to help facilitate the user's daily interactions. This intelligent wearable computer would be able to act as a personal assistant, who is always around, knows the user's personal preferences and tastes, and tries to streamline interactions with the rest of the world.

• Korean Journal of Environment and Ecology
• /
• v.30 no.2
• /
• pp.165-172
• /
• 2016

Mallard and Spot-billed ducks that are typical wintering water birds use the wide rice field in the center of the water system as a wintering ground. I try to figure out the daily movement distance from Home-Range to wintering ground for mallard and spot-billed ducks in Mangyunggang, Dongjingang where located in central region. In 2015 wintering period by using a Cannon-net, I attached WT-300 to 5 mallard and 5 spot-billed ducks. Daily movement distance is an overall average 0.89km, the largest distance was 31.09km. Daily movement distance of mallard was 0.97km, the largest distance was 28.78km. Daily movement distance of Spot-billed ducks was 0.80km, the largest distance was 33.39km. Home-Range analysis is used by the SHP files that is compatible with GIS and ArcGIS 9.0 Animal Movement Extension, it was analyzed using the Minimum Convex Polygon Method (MCP) and the Kernel Density Estimation (KDE). The behavior rights of two kinds of ducks was $490.34km^2$ by Minimum Convex Polygon Method (MCP) ($SD=311.20km^2N=10$), an important habitats Kernel Density Estimation (KDE 50%) was $42.24km^2$. Home-Range of Mallard (MCP) was $568.02km^2$, it is wider than home-range(MCP) of spot-billed duck $397.13km^2$ relatively, the core habitats of mallard is $53.05km^2$, it is wider than mallard's core habitats(KDE 50%) $29.26km^2$ relatively.