• Journal of Korean Society for Geospatial Information Science
• /
• v.1 no.1 s.1
• /
• pp.127-140
• /
• 1993

The purpose of this paper is to examine the possible benefits of combining transportation planning models with geographic information systems (GIS) in the hope that intergrating these systems can alleviate the inherent problems of transportation planning models such as user unfriendliness, labor intensiveness, and theoretical limitations. Specially, this paper focuses on the issue of incompatiblity between GIS and the conventional transportation planning models in dealing with network topologies. Resolving this conflict in topologies is a conerstone for eliminating the user-unfriendliness and labor-intensiveness issues. This paper presents the development of an algorithm that converts GIS topology into transportation network topology. The FORTRAN-based topology conversion algorithm generates transportation networks from the GIS cartographic file and establishes a communication charmel between the two systems.

• Restorative Dentistry and Endodontics
• /
• v.32 no.6
• /
• pp.491-497
• /
• 2007

The purpose of this study was to compare apical sealing ability of continuous wave canal filling technique according to various heat source plugging depths. Eighty one extracted human premolars with straight root were cleaned and shaped to size 35 using .06 taper rotary NiTi file. After cleansing and shaping, the teeth were divided into 5 groups following the heat source probing depths from the apex; 3, 4, 5, 6 and 7 mm. All specimens were filled using E&Q plus with #35/.06 tapered gutta-percha cone. The positive control teeth were not filled. All teeth were coated with nail varnish except the apical 1 mm around the apical foramen. Negative control teeth were completely sealed include the apical foramen. All specimens were immersed in 1% methylene blue solution for 72 hours. Then the specimens were sectioned horizontally at 1, 2 and 3 mm from the root apex. Each sectioned surface was photographed using a digital camera attached to the stereomicroscope at $12.5{\times}2.5$ fold magnification. All points at 1, 2 and 3 mm were summed as final score of one specimen. Statistical analysis of the collected data was performed. Under the condition of this study. there was no significant difference between the heat source plugging depths of 3, 4, 5, 6 and 7 mm in apical sealing ability. All of apical heat source plugging depth from 3 to 7 mm including Buchanan's protocol -from 5 to 7 mm- seems to be acceptable in clinical application.

• KOMUNHWA
• /
• no.70
• /
• pp.89-108
• /
• 2007

Stamped-Roof Tiles, the characteristics of Baekje Tiles are one of the most frequently excavated tiles in Iksan. Considering the types and amount of excavation of the Stamped-Roof Tiles unearthed in Iksan area, it seems that these are closely related with a Royal family. The tiles might be manufactured by a particular gorup of file maker since they are produced with same way. Referring the Ganji carved in the Stamped-Roof Tiles, I suppose that the tiles were produced and used in two time periods, the time around enthronement of The King Mu and the second quarter of the 7th century around Gichuk, AD. 629. In addition, Convex Tiles used in Wanggung-ri Site and Mireuk Site was also produced in same time as the Stamped-Roof Tiles, considering there pattern and the amount of excavation. The social background of tile production was analogized based on the technology and the time of the tile manufacture as well as the characteristics of the Stamped-Roof Tiles which represent the Obu and the Ohang. The production of the tiles was supported by Obu which aided the King Mu-oriented construction project the economic capacity of the Royal family was not enough to promote. The tile production system was totally controled by the Royal family and the inspector, neither producer nor donator, examined the quantitation of the tiles and generated the imprint of a seal with the Stamped-Roof Tiles.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.7
• /
• pp.441-448
• /
• 2016

The thrust force created by a propeller depends on the incoming flow velocity and the rotational velocity of the propeller. The performance of the propeller can be described by dimensionless variables, advanced ratio, thrust coefficient, and power coefficient. This study included the application of the immersed boundary lattice Boltzmann method (IBLBM) with the stereo lithography (STL) file of the rotating object for performance analysis. The immersed boundary method included the addition of the external force term to the LB equation defined by the velocity difference between the lattice points of the propeller and the grid points in the domain. The flow by rotating a 4-blade propeller was simulated with various Reynolds numbers (Re) (including 100, 500 and 1000), with advanced ratios in the range of 0.2~1.4 to verify the suggested method. The typical tendency of the thrust efficiency of the propeller was obtained from the simulation results of different advanced ratios. It was also necessary to keep the maximum mesh size ratio of the propeller surface to a grid size below 3. Additionally, a sufficient length of the downstream region in the domain was maintained to ensure the numerical stability of the higher Re and advanced ratio flow.

• Journal of Positioning, Navigation, and Timing
• /
• v.6 no.3
• /
• pp.125-133
• /
• 2017

Time comparison is necessary for the verification and synchronization of the clock. Two-way satellite time and frequency (TWSTFT) is a method for time comparison over long distances. This method includes errors such as atmospheric effects, satellite motion, and environmental conditions. Ionospheric delay is one of the significant time comparison error in case of the carrier-phase TWSTFT (TWCP). Global Ionosphere Map (GIM) from Center for Orbit Determination in Europe (CODE) is used to compare with Bernese. Thin shell model of the ionosphere is used for the calculation of the Ionosphere Pierce Point (IPP) between stations and a GEO satellite. Korea Research Institute of Standards and Science (KRISS) and Koganei (KGNI) stations are used, and the analysis is conducted at 29 January 2017. Vertical Total Electron Content (VTEC) which is generated by Bernese at the latitude and longitude of the receiver by processing a Receiver Independent Exchange (RINEX) observation file that is generated from the receiver has demonstrated adequacy by showing similar variation trends with the CODE GIM. Bernese also has showed the capability to produce high resolution IONosphere map EXchange (IONEX) data compared to the CODE GIM. At each station IPP, VTEC difference in two stations showed absolute maximum 3.3 and 2.3 Total Electron Content Unit (TECU) in Bernese and GIM, respectively. The ionospheric delay of the TWCP has showed maximum 5.69 and 2.54 ps from Bernese and CODE GIM, respectively. Bernese could correct up to 6.29 ps in ionospheric delay rather than using CODE GIM. The peak-to-peak value of the ionospheric delay for TWCP in Bernese is about 10 ps, and this has to be eliminated to get high precision TWCP results. The $10^{-16}$ level uncertainty of atomic clock corresponds to 10 ps for 1 day averaging time, so time synchronization performance needs less than 10 ps. Current time synchronization of a satellite and ground station is about 2 ns level, but the smaller required performance, like less than 1 ns, the better. In this perspective, since the ionospheric delay could exceed over 100 ps in a long baseline different from this short baseline case, the elimination of the ionospheric delay is thought to be important for more high precision time synchronization of a satellite and ground station. This paper showed detailed method how to eliminate ionospheric delay for TWCP, and a specific case is applied by using this technique. Anyone could apply this method to establish high precision TWCP capability, and it is possible to use other software such as GIPSYOASIS and GPSTk. This TWCP could be applied in the high precision atomic clocks and used in the ground stations of the future domestic satellite navigation system.

• Journal of KIISE:Information Networking
• /
• v.29 no.1
• /
• pp.86-96
• /
• 2002

In video conferencing system using H.263 encoding and decoding time is as important as compression rate is. To reduce encoding time, a number of methods were proposed. We use a method of them that reduces the computational complexity in motion estimation. The complexity is determined by three factors, such as a cost function, a search range parameter, and a motion search algorithm. In fact, it takes a lot of time to encode the video data on account of the cost function factor. That's the reason that we use the factor to reduce encoding time. In this paper, we tried to reduce total encoding time by reducing the number of calling the cost function. In case of a little moving, our algorithm enabled faster motion searching than TSS(Three Step Search) and NTSS(New TSS). Here, we called the algorithm by an ITSS(Improved TSS) that improves a shortcoming of NTSS requiring more checkpoints than TSS. For an experimentation, our algorithm was compared to other algorithms using PSNR, file size and SAD call times.

• Journal of KIISE:Databases
• /
• v.30 no.5
• /
• pp.507-520
• /
• 2003

In this paper, an automatic construction method of theme melody index for large music database and an associative content-based music retrieval mechanism in which the constructed theme melody index is mainly used to improve the users' response time are proposed. First, the system automatically extracted the theme melody from a music file by the graphical clustering algorithm based on the similarities between motifs of the music. To place an extracted theme melody into the metric space of M-tree, we chose the average length variation and the average pitch variation of the theme melody as the major features. Moreover, we added the pitch signature and length signature which summarize the pitch variation pattern and the length variation pattern of a theme melody, respectively, to increase the precision of retrieval results. We also proposed the associative content-based music retrieval mechanism in which the k-nearest neighborhood searching and the range searching algorithms of M-tree are used to select the similar melodies to user's query melody from the theme melody index. To improve the users' satisfaction, the proposed retrieval mechanism includes ranking and user's relevance feedback functions. Also, we implemented the proposed mechanisms as the essential components of content-based music retrieval systems to verify the usefulness.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.4
• /
• pp.478-486
• /
• 2021

This report demonstrates a method of generating a chair-side and computer-aided template for implant surgery based on the Top-Down and restoration-driven concept. Compared to the traditional CAD-CAM process which requires multiple steps to be taken between dental clinic and laboratory, this alternative procedure, VARO guide system (VARO Guide, CAD, Pre-Guide, VARO-mill, NeoBiotech, Seoul, South Korea) enables accurate and patient-friendly implant surgery as well as immediate provisional restoration in a single visit. First, bite-registration at centric jaw relation and CBCT were taken using the Pre-Guide. The CBCT data was then reorganized directly through the chair-side CAD, and we could determine the most appropriate 3-dimensional position of implant. The STL file was extracted and put into the chair-side CAM (VARO-mill) to fabricate a VARO. This surgical guide allowed the implants to be accurately positioned into the planned sites within an hour.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.32 no.1
• /
• pp.67-75
• /
• 2022

When acquiring a product having an OS, it is very important to identify the exact kernel version of the OS. This is because the product's administrator needs to keep checking whether a new vulnerability is found in the kernel version. Also, if there is an acquisition requirement for exclusion or inclusion of a specific kernel version, the kernel identification becomes critical to the acquisition decision. In the case of the Linux kernel used in various equipment, sometimes it becomes difficult to pinpoint the device's exact version. The reason is that many manufacturers often modify the kernel to produce their own firmware optimized for their device. Furthermore, if a kernel patch is applied to the modified kernel, it will be very different from its base kernel. Therefore, it is hard to identify the Linux kernel accurately by simple methods such as a specific file existence test. In this paper, we propose a static method to classify a specific kernel version by analyzing function names stored in the symbol table. In an experiment with 100 Linux devices, we correctly identified the Linux kernel version with 99% accuracy.

• Journal of Radiation Protection and Research
• /
• v.47 no.4
• /
• pp.195-203
• /
• 2022

Background: The aim of the present study was to determine radioactive concentrations in fertilizers known to contain essential nutrients. Results of this study could be used as basic data to monitor the impact of chemical fertilizers on the environment and public health. Nitrogen fertilizers, calcium fertilizers, sulfur fertilizers, phosphate acid fertilizers, and potassium chloride fertilizers were used in this study. Materials and Methods: Five chemical fertilizers were pulverized, placed in polyethylene containers, and weighed. The time to measure each specimen was set to be 3,600 seconds for a scintillator-based gamma-ray spectroscopy system. Concentration of gamma radionuclide was analyzed based on obtained spectra. At the end of the measurement, the spectrum file was stored and used to calculate radioactive concentrations using a gamma-ray spectrometer software. Results and Discussion: In the nitrogen fertilizer, 3.49 ± 5.71 Bq/kg of ¹³⁷Cs, 34.43 ± 7.61 Bq/kg of ¹³⁴Cs, and 569.16 ± 91.15 of ⁴⁰K were detected whereas ¹³¹I was not detected. In the calcium fertilizer, 5.74 ± 4.40 Bq/kg of ¹³⁷Cs (the highest concentration among all fertilizers), 22.37 ± 5.39 Bq/kg of ¹³⁴Cs, and 433.67 ± 64.24 Bq/kg of ⁴⁰K were detected whereas ¹³¹I was not detected. In the sulfur fertilizer, 347.31 ± 55.73 Bq/kg of ⁴⁰K, 19.42 ± 4.53 Bq/kg of ¹³⁴Cs, 2.21 ± 3.49 of ¹³⁷Cs, and 0.04 ± 0.22 Bq/Kg of ¹³¹I were detected. In the phosphoric acid fertilizer, 70,007.34 ± 844.18 Bq/kg of ⁴⁰K (the highest concentration among all fertilizers) and 46.07 ± 70.40 Bq/kg of ¹³⁴Cs were detected whereas neither ¹³⁷Cs nor ¹³¹I was detected. In the potassium chloride fertilizer, 12,827.92 ± 1542.19 Bq/kg of ⁴⁰K was and 94.76 ± 128.79 Bq/kg of ¹³⁴Cs were detected whereas neither ¹³⁷Cs nor ¹³¹I was detected. The present study examined inorganic fertilizers produced by a single manufacturer. There might be different results according to the country and area from which fertilizers are imported. Further studies about inorganic fertilizers in more detail are needed to create measures to reduce ⁴⁰K. Conclusion: Measures are needed to reduce radiation exposure to ⁴⁰K contained in fertilizers including phosphoric acid and potassium chloride fertilizers.