• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.3
• /
• pp.98-109
• /
• 2002

Bluetooth technology is a publicly available specification proposed for Radio Frequency (RF) communication for short-range :1nd point-to-multipoint voice and data transfer. It operates in the 2.4㎓ ISM(Industrial, Scientific and Medical) band and offers the potential for low-cost, broadband wireless access for various mobile and portable devices at range of about 10 meters. In this paper, we describe the structure and the test results of the bluetooth baseband module with direct memory access method we have developed. This module consists of three blocks; link controller, UART interface, and audio CODEC. This module has a bus interface for data communication between this module and main processor and a RF interface for the transmission of bit-stream between this module and RF module. The bus interface includes DMA interface. Compared with the link controller with FIFOs, The module with DMA has a wide difference in size of module and speed of data processing. The small size module supplies lorr cost and various applications. In addition, this supports a firmware upgrade capability through UART. An FPGA and an ASIC implementation of this module, designed as soft If, are tested for file and bit-stream transfers between PCs.

• The Journal of the Korea Contents Association
• /
• v.16 no.10
• /
• pp.477-482
• /
• 2016

This paper presents a new method of parity storing for ECC(error correcting code) in SSD (solid-state drive) and suitable structure of the controller. In general usage of NAND flash memory, we partition a page into data and spare area. ECC parity is stored in the spare area. The method has overhead on area and timing due to access of the page memory discontinuously. This paper proposes a new parity policy storing method that reduces overhead and R(read)/W(write) timing by using whole page area continuously without partitioning. We analyzed overhead and R/W timing. As a result, the proposed parity storing has 13.6% less read access time than the conventional parity policy with 16KB page size. For 4GB video file transfer, it has about a minute less than the conventional parity policy. It will enhance the system performance because the read operation is key function in SSD.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.10
• /
• pp.734-745
• /
• 2006

This paper presents a PC cluster-based distributed VOD server that minimizes the load of an interconnection network by adopting the VIA communication protocol and the interval cache algorithm. Video data is distributed to the disks of the distributed VOD server and each server node receives the data through the interconnection network and sends it to clients. The load of the interconnection network increases because of the large amount of video data transferred. This paper developed a distributed VOD file system, which is based on VIA, to minimize cost using interconnection network when accessing remote disks. VIA is a user-level communication protocol removing the overhead of TCP/IP. This papers also improved the performance of the interconnection network by expanding the maximum transfer size of VIA. In addition, the interval cache reduces traffic on the interconnection network by caching, in main memory, the video data transferred from disks of remote server nodes. Experiments using the distributed VOD server of this paper showed a maximum performance improvement of 21.3% compared with a distributed VOD server without VIA and the interval cache, when used with a four-node PC cluster.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.3
• /
• pp.25-35
• /
• 2006

Standardization or standard-related study are regarded as main issues in GIS applications. Though several GIS standards and specifications have been released, there are a few actual application cases adapting those. In this study, we designed and implemented a geo-spatial information processing system with editing, storing, and disseminating functions, in which standard GIS transportation data model by TTA linked with OGC-GML, XML-based geographic features encoding standard. The system developed in this study enables us to transfer and edit transportation entities based on TTA standards to GML, importing ESRI shapefile. In web-based system, GML-based databases are transformed to SVG file, for the purpose of web publishing. TTA GIS transportation data model is used in this study, and tested; however, standard data models from other application fields also can be easily applied because this system basically provides data importing and editing functions. This system as practical tools can be utilized for applicability test of GIS standard data model and practical operation of standard specification.

• Journal of the Korean Society of Radiology
• /
• v.1 no.2
• /
• pp.13-22
• /
• 2007

The purpose of this study was to survey a development of the wireless transmission system of medical images for ubiquitous medicine. There have been many changes in medical equipments and medical record medical treatment and medical record within hospital and PACS(Picture Archiving Communication System) which is picture management system for patients can be typical cases. It is difficult to use these automated medical systems unless they are within hospital and in case of rapid image reading in the emergency cases or in absence of doctor, it is difficult to perform it immediately. The present study implemented an image transmission system using CDMA connection so that images in the server can be viewed at any time and in any place. Remote wireless diagnosis based on medical images using PDA is applicable to medical areas that require mobility, and the use of PDA can be an ideal alternative for point of care. The use of PDA enables prompt and accurate access to digital medical images, which in turn reduces medical accidents and improves the quality of medical services through high productivity and efficiency of medical practitioners' works. It also enables quick response to patients' demands and high-quality medical services and, consequently, patients' high satisfaction.

• Journal of Advanced Navigation Technology
• /
• v.16 no.5
• /
• pp.864-870
• /
• 2012

Voice pattern recognition technology to solve the problems of the existing problems and common issues that you may have in language learning content analysis. This is the first problem of language-learning content, online learning posture. Game open another web page through the lesson, but the concentration of the students fell. Have not been able to determine the second issue according Speaking has made the learning process actually reads. Third got a problem with the mechanical process by a learning management system, as well by the teacher in the evaluation of students and students who are learning progress between the difference in the two. Finally, the biggest problem, while maintaining their existing content made to be able to solve the above problem. Speaking learning dedicated learning programs under this background, voice pattern recognition technology learning process for speech recognition and voice recognition capabilities for learning itself has been used in the recognition process the data of the learner's utterance as an audio file of the desired change to a transfer to a specific location of the server or SQL server may be easily inserted into any system or program, any and all applicable content that has already been created without damaging the entire component because the new features were available. Contributed to this paper, active participation in class more interactive teaching methods to change.

• Journal of Broadcast Engineering
• /
• v.16 no.3
• /
• pp.439-447
• /
• 2011

In this paper, we present a novel method to use metadata based on the eXtensible Markup Language (XML) for efficient data transfer between visual effects (VFX) and film editing. For transferring data to the VFX process, image sequences such as Cineon DPX or TGA are currently used in Korean post productions. The use of image sequences tends to increase rendering time and the amount of data for repetitive file format conversions, and as a result causes inefficiency in the entire production process. On the other hand, the use of metadata on the XML can reduce time and data because the repetitive rendering processes are not needed. This method can also be used at a variety of editing and VFX programs, and provides content information for combining online contents. The development of XML-base methods on the web enables flexible combination with other types of media.

• The Korean Journal of Archival Studies
• /
• no.18
• /
• pp.3-36
• /
• 2008

Despite the institutional, organizational, and technological advances in the level of national records management that has occurred during the past several years, there has been no significant change in the condition of records management within individual public institutions, which may be an outset for records management. In order to begin the advance in national records management with overall innovation in records management by public institutions, it is necessary to distinctly set up the direction of innovation and a project to carry out. Also, a person in charge of records management, who is supposed to lead records management in each institution, should share the directions and projects. Against this backdrop, this study aims to define "the evaluation of records management" as a vehicle to establish a common goal for the innovation of records management and the role of a person in charge of records management as well as to develop evaluation indicators that might be applicable to all public institutions. With this aim, the study drew requirements of records management from domestic and overseas cases in the evaluation of records management conditions as well as the laws and standards of records management, and a roadmap for national records management innovation. Then, the study developed evaluation indicators by classifying the requirements according to three areas involving an organizational environment, records management job, and records management in the offices that create and file their own documents. The organizational environment area is concerned with the evaluation of the records management policy and the responsibility of an institution, and the evaluation of human resources and physical environment. The records management business area includes the measurement of the level of jobs, such as the records creation control conducted by the records management authority of each institution, the management of records schedules, the accession, preservation, and appraisal of records and their service, and the monitoring of records management. The area of records management in the offices is composed of the creation, registration, arrangement, and transfer of records as they are intended to be used during the monitoring of records management conditions. The study made it possible to measure all evaluation indicators with a quantitative evaluation method by clearly proposing the standard for objective and accurate evaluation.

• The Korean Journal of Air & Space Law and Policy
• /
• v.30 no.2
• /
• pp.83-153
• /
• 2015

As our economy grows and the number of aircraft increase, the number of civil execution against aircraft cases are likely to increase as well in the future. The purpose of this article is to present the legal theory on the civil execution against aircrafts by drawing on the legal theory on the civil execution against vessels which constitute a relatively large number of cases thus observed. The provisions of the civil execution against immovables or vessel, shall basically apply mutatis mutandis to the civil execution against aircraft or light aircraft. The civil execution against ultra-light flying devices or a foreign aircraft shall be executed in conformity with the civil execution against movables. There are a compulsory auction, an auction to execute a security right to aircraft, and an auction under the right of retention, etc. in the civil execution against an aircraft. A compulsory execution against an aircraft means an execution carried out by a creditor against a debtor's aircraft to obtain satisfaction of claims for the purpose of payment of money. The court of execution of a compulsory execution against an aircraft shall be the district court having jurisdiction over the airport of stoppage or storage of such aircraft at the time of seizure. The forums of execution of a compulsory execution against an aircraft shall be exclusive forums. When a court has rendered an order on commencing an auction, it shall order an execution officer to receive a certificate of the aircraft's registration and other documents as required for its operation, and to submit them to the court. A court may revoke the procedures for a compulsory auction when an execution officer fails to obtain a transfer of the aircraft's registration certificate, etc. and the location of the aircraft is not evident, not later than an elapse of 2 months from the date on which an order on commencing an auction has been rendered. In the case where it is deemed that there exists a business-related need or other based on proper reasoning, the court may permit the aircraft's operation, upon the motion submitted by the debtor. In this case, there shall be a consent from the creditor, the highest bidder, the next highest bidder and successful bidder. A court may, upon a motion submitted by the creditor, make the dispositions required for observing and preserving the aircraft. When a debtor has submitted the documents under subparagraph 2 or 4 of the Article 49 of the Civil Execution Act, and furnished the guarantee equivalent to the claims of the execution creditors and the creditors demanding a distribution and to the costs for execution, before a declaration of bid, the court shall, upon request, revoke other procedures than those for distribution. The provisions of a obligatory auction against vessel or aircraft and an auction to execute a security right to real estate or vessel, shall apply mutatis mutandis to an auction to execute the security right to aircraft. In an auction to execute the security right to aircraft case, an executive title is not necessary. An executory exemplification is not necessary in an application for an auction to execute the security right to aircraft. A court should examine the existence of security right and claim secured. No order on commencing an auction procedure shall be issued with non-existence or invalidity of the security right and absence or extinguishment of the claim secured. Furthermore, these prohibitions are the reason of a decision on non-permit for sale, the court overlooked these prohibitions, and the decision on a permit for sale became final and conclusive, the successful bidder who paid the price and registered of ownership could not acquire ownership of the aircraft sold. A court may render a ruling to put plural aircrafts up for a blanket auction, only when they are in restraint and related matter (Supreme Court Order 2001Ma3688 dated on August 22, 2001). A righter of retention on aircraft may file a request for an auction against the aircraft. The provisions of an auction to execute a security right to aircraft shall apply mutatis mutandis to the formal auction. Airport facility fee and an aircraft are not in restraint and related matter, so an airport management corporation does not hold the right of retention on the aircraft (Supreme Court Decision 2011Da29291 decided on April 10, 2014). In an auction in accordance with the right of retention, all encumbrances (e.g., mortgages) on the sold aircraft shall be extinguished by a sale under the legal conditions for sale. Not only creditors who have claims for preferential payment but also general creditors could demand for distribution. The precedence of the claim of the right of retention on aircraft and that of general creditor's claims are equal.