• Journal of the Korean Society of Radiology
• /
• v.10 no.4
• /
• pp.247-253
• /
• 2016

Ultrasound devices diagnose many disease, which is widely used, can not be standardized quantitative evaluated in order to evaluate sonography image of quality. Therefore, in this papers, aims to get correct image in order to accurate diagnosis by figuring out the appropriate parameter based on each target by measuring distortion which results in the analyzation of the sensitivity of SNR and the histogram of signal by manipulating parameter of 8 mm target in ATS-539 multipurpose phantom. Equipment using Acuson sequoia 512, convex probe and utilizes multi-objective phantom. experiment method is that first you put the phantom on the flat and acquire 85 sheets of image, changing frequency(2,3,4 MHz, harmonic 3, 4, 4.5 MHz), Focus(2, 4, 6 unit), and Dynamic Range(58, 68, 78, 88, 98) for a 8 mm structure. through the Image J program. The sensitivity angle of 8mm target through Image J program is gauged by each separate target SNR and the distorted angle subtract and measure Histogram of background from Histogram of signal and take top 40% from the given result value above. According to parameter variation we found out proper parameter by acquiring SNR of sensitivity and distortion data for aspect of transition. The more this findings have Focus, the lower distortion value and at 4 MHz frequency this result have high SNR and low distortion value. Dynamic Range got an appropriate image on 88 and 98. It is considered on the basis of the experimental data, the probability of disease diagnosis will get higher.

• Fire Science and Engineering
• /
• v.30 no.3
• /
• pp.73-78
• /
• 2016

The Installation, Maintence, and Safety Control of Fire-fighting Systems Act of South Korea regulates that over 30-storey high-rise buildings including underground spaces should vitally perform the Performance-based Design to minimize property damage and personal injury as a fire risk assessment in advance. Therefore a PBD designer such as a fire safety professional engineer evaluate occupant's life safety by a scientific methodology. In order to evaluate the life safety, fire safety designers calculate the Required Safety Egress Time (RSET) which does not have the legal criteria regarding the standard method of calculation yet. So this way has been showing different results depending upon the designer's choice, knowledges and experiences. In this study, RSET calculation methods by six designers respectively were analysed from the thirteen reports of real performance based design projects conducted in Busan for a last five years. In particular, the Response Time calculation methods which have the most powerful effect for figuring the RSET are compared with the other designer's to deduce an error value.

• Journal of Educational Research in Mathematics
• /
• v.23 no.4
• /
• pp.467-490
• /
• 2013

Correlation is a basic statistical concept which is necessary for understanding the relationship between two variables when they change values. In the middle school curriculum of Korea, only informal definition of correlation is taught with two-way data representations such as scatter plots and contingency tables. In this study, we investigated Korean high school students' understanding of correlation using a test consisting of 35 items about interpretation of scatter plot, contingency table, and text in realistic situation. 216 students from a high school in Seoul took the test for 20 minutes. From the results, we could observe the following: First, students did not have right criteria for determining the strength of correlation presented in scatter plots. Most of students could determine if there is correlation/no correlation and if the correlation is positive/negative by seeing the data presented in scatter plots. However, they did not judge by the closeness to the regression line but rather judged by the closeness between data points. Second, when statements about comparing the strength of correlation in the context of real life situation were given in text, the students had difficulty in understanding the distribution-related characteristic of the bi-variate data. Students had difficulty in figuring out the local distribution characteristic of data, which cannot be guessed merely based on the expression 'The correlation is strong' without statistical knowledge of correlation. Third, a large number of students could not judge the association between two variabels using conditional proportions when qualitative data are given in 2-by-2 tables. They made judgement by the absolute cell count and when the marginal sum of two categories are different for explanatory variable they thought the association could not be determined. From these results, we concluded that educational measures are required in order to remove such misconceptions and to improve understanding of correlation. Considering that the current mathematics curriculum does not cover the concept of correlation, we need to improve the curriculum as well.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.1
• /
• pp.67-76
• /
• 2012

There are index adjustment method and item adjustment method in estimation methods for price fluctuation rate of public constructions. A relevant regulation has put item adjustment method as a principle, but in most construction, contract sum adjustment has been made by index adjustment method. Hence, this study, by figuring out width and causes of the gap between index adjustment method and item adjustment method through direct comparative analysis, solved inequality caused by difference between them and suggested a rational way against irrationality of each method. For building operations of public housing construction, a detailed fluctuation rate by index adjustment method and item adjustment method of construction cost elements of the same construction, that is, direct material cost, direct labor cost and historical construction cost was estimated to analyze difference between two adjustments and establish its cause. Across the analysis, it was found that fluctuation rate by item adjustment method was estimated lower than that by index adjustment method and difference between methods for estimating fluctuation rate of quotation unit price and application of index unrelated to construction type and construction nature are main causes of the difference. This study has a significance in that, for smooth contract sum adjustment between contracting parties, it practically proved the real difference between adjustment methods by conducting comparative analysis of the difference in direct correspondence way.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.2
• /
• pp.163-170
• /
• 2018

The purpose of this study is to describe quantitatively the characteristics and the structure of the Act on the development, management, etc. of Marinas (the Marinas Act) by analysing its provisions using semantic network analysis. The method of semantic network analysis has its advantages in overcoming limitations of the traditional content analysis method, as it is easy for the user to understand the structure and the shape of a network by figuring out the structural network among words. The object of the analysis is the full text of Marinas Act recently revised from Chapters 1 to 4, while partial analysis is carried out respectively for each chapter from Chapters 2 to 4. The structural characteristic of the Marinas Act shows that the act focuses on the development of marinas, as its main goal is interpreted to set up hardwares and to construct facilities rather than to promote the marina industry itself. Even though some clauses for human capital development and business development are included, they are of less importance compared to the development of marina facilities. This study provides some basic information on the structural characteristics of the current act, which can be referred to in subsequent studies. In the future, it also needs to be complemented through comparative analysis with government policy outcomes and performance of diverse analytical approaches.

• 한국균학회소식:학술대회논문집
• /
• 2014.10a
• /
• pp.13-13
• /
• 2014

Species belonging to the genus Fusarium are widely distributed and cause diseases in many plants. Isolation of fungal strains from air or cereals is necessary for disease forecasting, disease diagnosis, and population genetics [1]. Previously we showed that Fusarium species are resistant to toxoflavin produced by the bacterial rice pathogen Burkholderia glumae while other fungal genera are sensitive to the toxin, resulting in the development of a selective medium for Fusarium species using toxoflavin [2]. In this study, we have tried to elucidate the resistant mechanism of F. graminearum against toxoflavin and interaction between the two pathogens in nature. To test whether B. glumae affects the development of F. graminearum, the wild-type F. graminearum strains were incubated with either the bacterial strain or supernatant of the bacterial culture. Both conditions increased the conidial production five times more than when the fungus was incubated alone. While co-incubation resulted in dramatic increase of conidial production, conidia germination delayed by either the bacterial strain or supernatant. These results suggest that certain factors produced by B. glumae induce conidial production and delay conidial germination in F. graminearum. To identify genes related to toxoflavin resistance in F. graminearum, we screened the transcriptional factor mutant library previously generated in F. graminearum [3] and identified one mutant that is sensitive to toxoflavin. We analyzed transcriptomes of the wild-type strain and the mutant strain under either absence or presence of toxoflavin through RNAseq. Expression level of total genes of 13,820 was measured by reads per kilobase per million mapped reads (RPKM). Under the criteria with more than two-fold changes, 1,440 genes were upregulated and 1,267 genes were down-regulated in wild-type strain than mutant strain in response to toxoflavin treatment. A comparison of gene expression profiling between the wild type and mutant through gene ontology analysis showed that genes related to metabolic process and oxidation-reduction process were highly enriched in the mutant strain. The data analyses will focus on elucidating the resistance mechanism of F. graminearum against toxoflavin and the interaction between the two pathogens in rice. Further evolutionary history will be traced through figuring out the gene function in populations and in other filamentous fungi.

• Journal of Digital Convergence
• /
• v.14 no.4
• /
• pp.337-347
• /
• 2016

This study is aimed at figuring out the stress of workers in the field of railroad electricity and vehicles and its convergence factors. The workers were divided into the workers in the headquarters and in the field. A self-administered survey was conducted from February 9 to March 6 in 2015. 628 respondents' reply was analyzed by PASW Statistics Ver. 18.0. As the result, 94.7% of them belonged to the over weight group and frequently drank alcohol. The stress score was higher in the workers in the headquarters(3.00/5.00) than those in the field(2.85). For the workers in the headquarters, those who smoke everyday showed higher stress level than that of those who have never smoked while stress level decreased in those who are satisfied with their company life. For the workers in the field, stress increased in the higher age group than those in their the twenties and those who skip their breakfast. The more positive their subjective awareness toward their body shape and the more satisfied they were with their company life, the more their stress level decreased. Therefore, the study suggests that we have to focus on those who are vulnerable to stress using the factors.

• Culinary science and hospitality research
• /
• v.15 no.1
• /
• pp.79-93
• /
• 2009

This study was conducted to suggest a way to increase profitability by figuring out the factors that affect the satisfaction and revisit intention of customers who visit a theme park, studying the property and correlation of service quality. The purpose of this study was to figure out the relation between the service quality of foods and beverages and its influence on the satisfaction of the customers who visited the theme park. As service quality and price of foods and beverages which occupy 20% of the whole sales of the theme park are related with each other, they positively affect the satisfaction of visitors of the theme park and their revisit intention. It means it is necessary to improve the service quality of foods and beverages and to set the reasonable price based on quality in order to raise the rate of the customers' revisit through increase in profits and customer satisfaction. One of the most important quality factors to improve service quality is service attitude of employees who help customers. It requires to take action to improve employers' morals and service mind via education and training. Thus, it is possible to raise customer satisfaction and revisit intention by improving service quality.

• Korean Journal of Optics and Photonics
• /
• v.24 no.6
• /
• pp.331-337
• /
• 2013

A large optical surface is fabricated by grinding, polishing and figuring. The grinding process is the most rapid and has the largest amount of fabrication of all processes. If we measure the surface precisely and rapidly in the grinding process, it is possible to improve the efficiency of the fabrication process. Since the surface of grinding process is rough and not shiny, it is not easy to measure the surface using light so that we cannot use an interferometer. Therefore, we have to measure the surface using a mechanical method. We can measure the surface under the grinding process by using a laser tracker which is a portable 3-dimensional coordinate measuring machine. In this paper, we used the laser tracker to measure the surface error of 1 m diameter spherical mirror. This measurement result was compared to that of an interferometer. As a result, surface measurement error was found to be $0.2{\mu}m$ rms (root mean square) and $2.7{\mu}m$ PV (Peak to Valley), which is accurate enough to apply to the rough surface under the grinding stage.

• 한국지구물리탐사학회:학술대회논문집
• /
• 1999.08a
• /
• pp.48-64
• /
• 1999

For quantitative evaluation of geotechnical engineering properties such as rippability and diggability, clear interpretation on the subsurface velocity structures should be preceded by figuring out top soil, weathered and soft rock layers, shape of basement, fracture zones, geologic boundary and etc. from the seismic refraction data. It is very important to set up suitable field parameters, which are the configuration of profile and its length, spacings of geophones and sources and topographic conditions, for increasing field data quality Geophone spacing of 3 to 5m is recommended in the land slope area for house land development and 5 to 10m in the tunnel site. In refraction tomography technique, the number of source points should be more than a half of available channel number of instrument, which can make topographic effect ignorable. Compared with core logging data, it is shown that the velocity range of the soil is less than 700m/s, weathered rock 700${\~}$1,200m/s, soft rock 1,200${\~}$1,800m/s. And the upper limit of P-wave velocity for rippability is estimated 1,200 to 1,800m/s in land slope area of gneiss. In case of tunnel site, it is recommended in tunnel design and construction to consider that tunnel is in contact with soft rock layer where three lineaments intersecting each other are recognized from the results of the other survey.