• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.5
• /
• pp.463-470
• /
• 2015

In this paper, a new dual-band bandpass filter(BPF) that has resonators and feed lines with Stepped-Impedance Resonator(SIR) structures is proposed. Feed lines with SIR structure provide maximum magnetic field points which occur at the same locations of the input and output feed lines, so the insertion loss of BPF was reduced. Applying the SIR structure to the BPF for the first passband improves rejection characteristics between the first passband and the second passband. It reduces the coupling between the BPF for the first passband and the BPF for the second passband, so it makes the dual-band BPF more compact. The proposed design method provides independent changes of both the center frequency and the bandwidth for each resonator, and also improves filtering characteristics. The validity of the proposed design method is confirmed by comparisons between the designed parameters and the measured results satisfying WLAN specifications.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.4
• /
• pp.450-467
• /
• 1998

The characteristics of the unstable impinging circular jet is investigated based on the frequency characteristics and the sound field of the impinging-tones. Two symmetric modes S1 and S2, associated with low frequency and high frequency respectively, and one helical mode H have been observed. At low speed the S2 mode is dominant and switched by the S1 mode as the speed increases. When the jet speed is high the S1 mode is very active over the impinging distance from half the nozzle diameter to its ten times, while the S2 mode occurs at shorter distance corresponding to stage 2 and 3. The helical mode H seems unstable, likely to be influenced much by the experimental environment, and occurs at relatively high speed with almost the same frequency characteristics as the S2 mode. By estimating the convection speed of the unstable jet, it is found that the ratio of the convection speed to the jet speed decreases with both Strouhal number and Reynolds number and the speed of S2 mode is faster than the Si mode. When the present experimental results are compared with the previous investigations performed for the hole tone and the impinging tone with a small plate, the S1 mode is found to be associated with the ring vortex of large diameter with low speed, but the S2 mode with the vortex of small diameter with high speed. In addition, the frequency is found to be influenced by the nozzle configuration but the characteristics is almost the same. From the impinging distance and frequency range, it can be deduced that S1 mode is related with the jet column mode and S2 mode with the shear mode.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.11a
• /
• pp.88-94
• /
• 1999

Recently, PTFE-polyimide composites are being used self-lubricating parts for industrial field. Thus, this study is mainly concerned with friction and wear properties for the piston ring of non-lubricating air compressor which made of PTFE-polyimide composites. The friction and wear test was carried out for the different composition ratio under the atmosphere room temperature and constant load of 7.69N and their friction and wear properties were compared with each other at various sliding speed. Notable results are summarized as follows. PTFE 100% showed that friction coefficient was almost same values at 0.94 and 1.88m/s but the value was decreased at 2.83m/s because the friction temperature is higher than low speed. PTFE 80%-PI 20% showed the lowest mean friction coefficient at 2.83m/s. PTFE 20%-PI 80% showed the highest friction coefficient at 0.94m/s and the value was decreased at high speed but the value is higher than other materials except PTFE 100 %. PI 100% showed the highest friction coefficient at 0.94 and 1.88m/s because adhesive wear mainly occurred that speed. PTFE 100% showed highest specific wear rate on the whole. Specific wear rate of PTFE 80%-PI 20% was almost the same value with PTFE 20%-PI 80%. PI 100% showed the lowest value at high sliding speed because the friction surface was thicken and carbonated by high friction temperature.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2005.11a
• /
• pp.31-43
• /
• 2005

Isoflavones are naturally occurring plant chemicals belonging to the 'phytoestrogen' class. The isoflavones are strikingly similar in chemical structure to natural estrogens. The phenolic ring is a key structural element of most compounds that bind to estrogen receptors. Dietary components that recently have received attention for their action as phytoestrogens are soy isoflavones. Soy products are the most significant dietary sources of isoflavones. Recently It is concerned clinical nutrition of isoflavone that is driven by reason of alternative sources of exogenous estrogen are constantly being needed. Estrogen therapy after the menopause offers protection from cardiovascular disease, reduces the extent of osteoporosis and relieves menopausal symptoms. Exogenous estrogen treatment is a fear of possible increased risk of developing breast cancer and because of side effects. Daily intake of soybean or soy food can affirmative effect to disease occurrence, that is based on mechanical investigation, experimental results of animals and human. Research into isoflavone is going on various field to relieve hormone - dependent disease such as cancer, menopausal symptom, cardiovascular disease and osteoporosis. Isoflavone is plenty in soybean meal, soy by-product, but only limited information is available on isoflavone efficacy into animal husbandry. Thus we conducted three experiments to investigate the effects of dietary isoflavone on productivities, antioxidative responses and bone metabolism in poultry. Dietary supplementation of isoflavone resulted in preventing the lipid oxidation of plasma and egg yolk. Dietary isoflavone improved bone development in egg-type growing chicks and broilers in terms of tibial strength. It was suggested that the proper use of feed additives such as isoflavone might provide means of improving antioxidative effect, skeletal strength, egg and eggshell quality.

• Research in Plant Disease
• /
• v.15 no.1
• /
• pp.8-12
• /
• 2009

Virus disease surveys of strawberries cultivated and preserved as germplasm resources in Korea was conducted during 2007-2008. Virus detection was conducted by RT-PCR using total RNAs extracted from strawberry samples. We detected the infection with Strawberry mild yellow edge virus (SMYEV), Strawberry mottle virus (SMoV), Strawberry vein banding virus (SVBV) and Strawberry pallidosis associated virus (SPaV) while no infection with Strawberry crinkle virus (SCV), Strawberry necrotic shock virus (SNSV), Strawberry latent ring spot virus (SLRSV) and Arabis mosaic virus (ArMV) was observed. The infection rate of virus disease on 4 cultivars including Seolhyang, Maehyang, Gumhyang, and Dahong, bred in Korea, was 0.1, 1.9, 0, and 0%, respectively. Surprisingly, however, cultivar Red Peal introduced from Japan in 1997 revealed 48.3% virus infection rate. SMYEV, SMoV and SPaV were also identified in strawberries growing in the farm fields of Korea. In the field, however, SMYEV was the most predominant virus (97.4%) among those 3 identified viruses. SVBV was detected only in strawberry kept as a germplasm.

• Geotechnical Engineering
• /
• v.14 no.5
• /
• pp.29-38
• /
• 1998

The purpose of this research is to develop an amended clay liner by utilizing waste lime produced as a by-product in chemical industries. Waste lime contains various kinds of organics which affect the permeability, compactability, and unconfined compressive strengths of soil. The geotechnical engineering properties of waste were improved by adding other materials so that they might meet the EPA requirement of clay liner. Granite weathered soil, which is abundant in Korea and can be obtained easily in the field. was used as a primary additive to improve geotechnical engineering properties of waste lime. Various kinds of laboratory tests related to geotecnnical engineering properties, required to evaluate the design criteria for the clay liner in the solid waste landfill. were carried out by changing miRing ratio of waste lime with additive. According to the laboratory test results, in order to obtain the appropriate amended clay liner. the effective miffing ratio of waste lime in granite weathered soil was proved to be about 20~30%.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.247.1-247.1
• /
• 2014

The capacitive coupled plasma is used widely in the semiconductor industries. Especially, the uniformity of the industrial plasma is heavily related with defect ratio of devices. Therefore, the industries need the capacitive coupled plasma source which can generate the uniform plasma and control the plasma's uniformity. To achieving the uniformity of the large area plasma, we designed multi-powered electrodes. We controlled the uniformity by controlling the power of each electrode. After this work, we started to research another concept of the plasma device. We make the plasma chamber that has multi-ground electrodes imaginary (CST microwave studio) and simulate the electric field. The shape of the multi-ground electrodes is ring type, and it is same as the shape of the multi-power electrodes that we researched before. The diameter of the side electrode's edge is 300mm. We assumed that the plasma uniformity is related with the impedance of ground electrodes. Therefore we simulated the imaginary chamber in three cases. First, we connected L (inductor) and C (capacitor) at the center of multi-ground electrodes. Second, we changed electric conductivity of multi-ground electrode. Third, we changed the insulator's thickness between the center ground electrode and the side ground electrode. The driving frequency is 2, 13.56 and 100 MHz. We switched our multi-powered electrode system to multi-ground electrode system. After switching, we measured the plasma uniformity after installing a variable vacuum capacitor at the ground line. We investigate the effect of ground electrodes' impedance to plasma uniformity.

• Radiation Oncology Journal
• /
• v.16 no.2
• /
• pp.115-123
• /
• 1998

Purpose : This study was tried to evaluate the effect of the partial body fractionated irradiation on the frequency of chromosomal aberration. Materials and Methods : In three patients with uterine cervix carcinoma, chromosomal aberrations were analyzed during fractionated external beam radiotherapy Radiation field included whole pelvis and total dose was 5040 cGy in 28 fractions. Results : The values of the frequency of dicentrics and rings (Ydr) in pre-irradiated peripheral lymphocytes in three patients were 0.0060, 0.0000, and 0.0029, respectively. The frequency of dicentrics and rings, estimated during the course of radiotherapy, increased with radiation dose and best fitted to the linear equation, $Ydr=7.31{\times}10^{-5}D(cGy)+1.45{\times}10^{-2}$. The frequency of dicentrics and rings among the cells with dicentric and/or ring(Qdr) also showed increasing tendency and best fitted to the linear equation, $Qdr=1.01{\times}10^{-4}D(cGy)+1.04$. Conclusion : Ydr increased linearly with radiation dose in the dose range of our study, and Qdr showed increasing tendency with dose.

• Korean Journal of Veterinary Service
• /
• v.21 no.4
• /
• pp.451-465
• /
• 1998

The present study was carried out to investigate the prevalence of brucellosis in Kyungbuk area for the 3 years from 1966 to 1998. Collective milk samples were routinely screened to detect positive farms by using the milk ring test(MRT), and serum agglutination test was performed to detect sero-positive individuals in the MRT positive farms. Attempt were made to isolate the causative organismas from slaughtered sero-positive reactors and some biochemical and polymerase chain reation characters of the isolates were also made to identify the organisms. Seroprevalence to brucellosis in peoples who are close contact with infected dairy herds was also investigated. Brucellosis of dairy cattle was rare before 1997, but has been broken more frequently since early 1998. By the MRT for dairy herds, positive rate was gradually increased every year : 0.6% in 1996, 1.5% in 1997, 3.9% in 1998. Among 262 MRT-positive herds, only 21 herds(8.0%) showed positive brucellosis in serological test. The isolation rates of Brucella sp from tested materials were 51.2% in supramammary glands, 39.5% in milks, and 50.0% in pulmonary Iymphnode, respectively. Isolated strain and biotype were Brucella(B) arbortus biotype 1 in 26 heads, and were B suis biotype 1 in 2 heads. Isolated strain and vaccine strain were very similar in their colony morphology and staining. In drug susceptibility, isolated stains(B abortus) and vaccine strain(B abortus RB-51) were sensitive to ampicillin, gentamycin, kanamycin, neomycin, penicillin, streptomycin, and to tetracycline, but resistant to erythromycin. In the PCR, field strains reacted to BA and IS711 primers, and vaccine strain reacted to BA, IS711, and RB5l primers. In the plate agglutination test of 96 sera of human contacted with animals, serum antibody titer detected 1 : 100 in one person, 1 : 200 in one, and below 1 : 25 in the others.

• Journal of Biosystems Engineering
• /
• v.39 no.1
• /
• pp.21-33
• /
• 2014

Background: Significant technological development and changes happened in the tractor industries. Contrariwise, the test procedures of the major standard development organizations (SDO's) remained unchanged or with a little modification over the years, demanding new tractor test standards or improvement of existing ones for tractor performance, safety, and comfort. Purpose: This study focuses on reviewing the research trends regarding performance, safety and comfort evaluation of agricultural tractors. Based on this review, few recommendations were proposed to revise or improve the current test standards. Review: Tractor power take-off power test using the DC electric dynamometer reduced human error in the testing process and increased the accuracy of the test results. GPS signals were used to determine acceleration and converted into torque. High capacity double extended octagonal ring dynamometer has been designed to measure drawbar forces. Numerical optimization methodology has been used to design three-point hitch. Numerous technologies, driving strategies, and transmission characteristics are being considered for reducing emissions of gaseous and particulate pollutants. Engine emission control technology standards need to be revised to meet the exhaust regulations for agricultural tractors. Finite Element Analysis (FEA) program has been used to design Roll-Over Protective Structures (ROPS). Program and methodology has been presented for testing tractor brake systems. Whole-body vibration emission levels have been found to be very dependent upon the nature of field operation performed, and the test track techniques required development/adaptation to improve their suitability during standardized assessment. Emphasizes should be given to improve visibility and thermal environment inside the cab for tractor operator. Tractors need to be evaluated under electromagnetic compatibility test conditions due to large growing of electronic devices. Research trends reviewed in this paper can be considered for possible revision or improvement of tractor performance, safety, and comfort test standards.