• The Journal of the Acoustical Society of Korea
• /
• 제28권1E호
• /
• pp.9-15
• /
• 2009

In this paper, FSTL (Field Sound Transmission Loss) measured in a mock-up simulating ship cabins is studied. A mock-up is built by using 6 mm steel plate, and two identical cabins are made where 25 mm or 50 mm sandwich panel is used to construct wall and ceiling inside the steel structure. Various wall panels and ceilings are tested, where effects of wall and ceiling panel thickness, and presence of a unit toilet on FSTL are investigated. It is found that the effect of unit toilet on FSTL is at most 1 dB. From the comparison of FSTL for panels of the same thickness of 50 mm, it is observed that panel having inside air cavity of 10 mm shows higher STL than that of the panel without air cavity. Comparison of FSTL for panels of 50 mm and 25 mm thickness shows that dependency on surface density predicted by mass law is not observed. The sandwich panels act as a mass-spring system, which shows a resonant mode that cannot be explained by the mass law. It is also found that STL from laboratory test is higher than FSTL by 5- 10 dB, which can be explained by flanking structure-borne noise transmission path such as ceiling, floor and corridor-facing wall.

• 한국자기학회지
• /
• 제21권6호
• /
• pp.193-197
• /
• 2011

두께가 다른 CoPt 자성막을 전기도금법으로 제작하여 자화역전 기구와 자기상호작용이 자기역전 부피에 미치는 영향을 연구하였다. 자기모멘트 감쇠의 시간의존성과 잔류자기화 곡선 측정결과로부터 모든 시료의 지배적인 자화역전 기구는 자벽고착에 의한 자벽이동임을 알 수 있었다. 자기점성계수 및 비가역 자화율로부터 구한 자기역전 부피는 시료의 두께 및 인가 자기장의 세기에 거의 무관하게 일정하였으나, 자기역전 부피로부터 구한 역전 직경의 크기는 두께가 두꺼울수록 감소하는 경향을 보였다. 이와 같은 현상은 자벽고착에 의해 제어되는 자벽운동과 쌍극자 상호작용에 의한 것으로 판단된다.

• 한국주거학회논문집
• /
• 제21권6호
• /
• pp.91-98
• /
• 2010

The purpose of this study is to develop the feasibility of movable partition wall components that are able to correspond changes of structure system and spatial configuration by the needs of residents for the activation of long-life housing. The key element of various movable partition wall components, a movable partition wall, was analyzed for problems through both as-is analysis and field installation in Korea and Japan, and then its feasibility was verified. The movable partition wall can break the uniformity of a fixed one, can integrate and separate limited space by changes in the demands of residents, can be easy to separate, and can be independent. The development of the movable partition wall is important for the realization of diverse residential space, ease of remodeling, environment adaptation, promotion of modularization, etc. It is comprised of surfacing materials, core materials, structural materials, and movable parts. The domestic movable partition wall was verified regarding the feasibility of an apartment house through on-site inspections and sound insulation tests by KOHP21, KICT. In conclusion, the construction of long-life housing that has sustainable values in the use of housing is nationally an important assignment, so as to secure good housing stock.

• Archives of Plastic Surgery
• /
• 제33권5호
• /
• pp.552-556
• /
• 2006

Purpose: As the use of computed tomographic scanning spread, the diagnosis of blow-out fractures of the medial orbital wall increased. Conventionally, the surgery of blow-out fractures in medial orbital wall was performed by various approaches with external incision or endoscopic approach. Although the field of orbital surgery has progressed significantly during the last decade, accurate realignment and replacement of component is difficult due to lack of visualization of the fracture site, blind dissection of the orbital wall, and difficulty in insertion of implant. In order to overcome these shortcomings, we explored the use of endoscopic transnasal approach together with subciliary approach. Methods: The entrapped periorbital tissues in the ethmoid sinus were completely reduced endoscopically, and the bone defect of medial orbital wall was reconstructed with $Medpor^{(R)}$ insertion via subciliary approach. This technique was applied to 13 patients who had medial orbital wall fracture. Results: The patients were followed-up for 3 to 24 months with an average of 9 months. The postoperative courses were satisfactory in all cases. Conclusion: The conjunction of endoscopic transnasal and subciliary approach technique seems to produce good results in medial orbital wall fracture.

• 한국자동차공학회논문집
• /
• 제16권2호
• /
• pp.166-174
• /
• 2008

Numerical study on the impingement process and the fuel film formation of the hollow-cone fuel spray was conducted under vaporization condition, and the effect of the wall cavity angle on spray-wall impingement structure was investigated. A detailed understanding of this phenomena will help in designing injection systems and controlling the strategies to improve engine performance and exhaust emissions of the Gasoline Direct Injection (GDI) engine. The improved Abramzon model was used to model the spray vaporization process and the Gosman model was adopted for modeling of spray-wall impingement process. The calculated results of the spray-wall impingement process were compared with experimental results. The velocity field of the ambient gas, the Sauter Mean Diameter (SMD) and the generated fuel film on the wall, which are difficult to obtain by the experimental method, were also calculated and discussed. It was found that the radial distance after the wall impingement and the SMD decreased with increasing the cavity angle and the temperature.

• 한국주거학회논문집
• /
• 제3권1호
• /
• pp.57-67
• /
• 1992

Field survey were made. and the numbers of samples are 294 houses(3-ways;66-95.7m2, 99-128.7m2) and more than 132m')in Daegu.The major findings are as follows:1) The space evaluation of the living room is changed by the furniture occupancy rate and is different of the arrangement types.2) The space evaluation of the living room is much affected by the type of furniture which lie in near wall arrangement in 66-95.7m2, the proportion of the wall occupancy in 99-128.7m2, the proportion of the space occupancy in more of 132m2.3) In the living room an appropriate quantity of furniture is classified into 3 types of the occupying proportion.As the floor occupancy proportion supporting furniture is 13-22%, wall furniture is 10-l7f% and total furniture which combined both the supporting furniture and the wall furniture is 23-36%. Second. The proportion occupying the wall is 6-11% for the supporting furniture, 14-27% for the wall furniture, and 24-32% for the total furniture. Finally the proportion occupying the space is 12-9% for the supporting, 6-llftfer the wall furniture, and 12-l9ft for the total furniture.

• Journal of Mechanical Science and Technology
• /
• 제17권2호
• /
• pp.296-309
• /
• 2003

The periodicity of the physiological flow has been the major interest of analytic research in this field up to now Among the mechanical forces stimulating the biochemical reaction of endothelial cells on the wall, the wall shear stresses show the strongest effect to the biochemical product. The objective of present study is to find the effects of velocity waveform on the wall shear stresses and pressure distribution along the artery and to present some correlation of the velocity waveform with the clinical observations. In order to investigate the complex flow phenomena in the bifurcated tube, constitutive equations, which are suitable to describe the rheological properties of the non-Newtonian fluids, are determined, and pulsatile momemtum equations are solved by the finite volume prediction. The results show that pressure and wall shear stresses are related to the velocity waveform of the physiological flow and the blood viscosity. And the variational tendency of the wall shear stresses along the flow direction is very similar to the applied sinusoidal and physiological velocity waveforms, but the stress values are quite different depending on the local region. Under the sinusoidal velocity waveform, a Newtonian fluid and blood show big differences in velocity. pressure, and wall shear stress as a function of time, but the differences under the physiological velocity waveform are negligibly small.

• 대한기계학회논문집B
• /
• 제31권1호
• /
• pp.21-28
• /
• 2007

The use of drug-eluting stents has dramatically reduced the incidence of restenosis however, much remains to be teamed about the performance of these stouts. In the present study, we tested the hypothesis that the design of drug-eluting stents influences the efficacy of local drug delivery to the arterial wall and that this effect depends on both arterial geometry and the prevailing flow conditions. We performed computational simulations in which the coupled Navier-Stokes and advection-diffusion equations were solved to determine the flow field and drug concentration in the vicinity of model drug-eluting stouts It is found that the characteristics of flow phenomena can be influenced greatly by the ratio of stent diameter to vessel diameter. The presence of drug-eluting stent may have profound effect on wall shear stresses, recirculation sizes and drug distributions. The results show that recirculation zone is influenced by the imposed flow conditions and stent diameter. In pulsatile flow, the low wall shear stress and high drug concentration occur along the arterial wall during the decelerating flow conditions. These results could provide the guideline for future drug-eluting stent designs toward reducing restenosis by affecting local wall shear stress distributions associated with neointimal hyperplasia.

• International Journal of Internet, Broadcasting and Communication
• /
• 제15권2호
• /
• pp.118-123
• /
• 2023

With the continuous development of emerging technologies represented by VR technology, many game developers are declaring that they are constantly trying to break the "fourth wall" and break the boundaries between virtual and reality to create game immersion for players. new game. But for many gamers, a strong sense of immersion is not the focus of their pursuit. The sense of control and safe exploration during the game is also the game experience that many gamers are pursuing. Moreover, there is ambiguity in the definition of the concept of breaking the fourth wall in the field of academic theory. The purpose of breaking the fourth wall was to separate the real world from the virtual world, to remind the audience that the actors and the audience are in two different worlds, and to trigger the audience's thinking about drama and deeper philosophy. But in the current game, it has become a blurring of the boundary between virtual and reality, pulling players into the virtual world, and focusing on the immersive experience. In this paper, we will first sort out the concept of "breaking the fourth wall", and then conduct a comparative analysis of horizontal scroll games and VR games, and conclude that the "fourth wall" has an impact on players Great conclusion.

• 한국지반공학회논문집
• /
• 제31권5호
• /
• pp.35-46
• /
• 2015

본 연구에서는 최근 국내에서 사용이 증가하고 있는 2열 자립식 흙막이 공법에 있어서 안정성에 영향을 미치는 주요 설계인자들을 분석하고 설계기준을 제안하기 위하여 현장적용 결과의 분석 및 3차원 유한차분 해석을 수행하였다. 지반특성에 따른 본 공법의 거동을 분석하기 위하여 사질토가 지배적인 현장과 점성토가 지배적인 2개의 현장에 적용을 수행하였으며, 굴착에 따른 흙막이 벽체의 수평변위 및 휨모멘트를 분석하였다. 3차원 유한차분 모델링 기법의 타당성을 검증하기 위하여 현장적용 결과와 비교 분석을 수행한 결과, 본 연구의 수치해석 모델링 기법은 본 공법의 굴착에 따른 거동을 합리적으로 모사하는 것으로 나타났다. 또한 흙막이 벽체를 구성하는 전열말뚝(엄지말뚝) 및 후열말뚝(억지말뚝)의 간격(S), 전열말뚝과 후열말뚝간의 거리(D), 굴착심도(H) 및 말뚝의 근입깊이(Z) 등, 본 공법의 주요 설계인자들의 영향 정도를 분석하기 위하여 다양한 경우의 3차원 유한차분 모델링 및 해석을 수행하였다. 그 결과, 굴착에 따라 발생하는 흙막이 벽체의 최대 수평변위는 전열말뚝 및 후열말뚝의 간격의 감소, 전열말뚝과 후열말뚝간의 거리의 증가 및 말뚝 근입심도의 증가에 따라 감소하였으며, 이러한 특징은 점성토 조건의 지반보다는 사질토 조건의 지반에서 보다 명확하게 나타나는 것을 확인할 수 있었다.