• 천문학회지
• /
• 제32권2호
• /
• pp.109-117
• /
• 1999

UBVI CCD photometry has been obtained for a region around the Wolf-Rayet star WR 12. We found two young stellar associations in the observed field: the nearer one comprises the field members of Vela OBI association at d = 1.8kpc, while the farther one is the young open cluster Bochum 7 (Bo 7) at d = 4.8kpc. The stars associated with Bo 7 showed no central concentration which suggests that Bo 7 is not a young open cluster but simply a local concentration in the density of young stars belonging to the OB association (Vel OB3). These two associations have similar ages but remarkably different mass function slopes ($\Gamma$ = -2.1 $\pm$ 0.3 for Vel OBI and -1.0 $\pm$ 0.3 for Bo 7). The stars in Vel OBI shows an evident age spread (${\Delta}T\~ 9Myr$). We also found two strong H$\alpha$ emission stars - WR 12 and $\sharp$1066 - from narrow band H$\alpha$ photometry.

• 터널과지하공간
• /
• 제14권2호
• /
• pp.97-107
• /
• 2004

실내시험 및 현장시험 등으로부터 구해진 각종 암반 물성치를 설계에 반영시키기 위해 여러 가지 외삽법이 적용되고 있으며, 이 기법들은 대체적으로 충분한 현장 조사 및 시험을 통해 합리적인 RMR값을 도출한 뒤, 이를 토대로 강성 및 강도 정수를 산정하는 수순을 따르고 있다. 그러나 현장 여건상 충분한 시험조사가 이루어지지 못하여 RMR값의 정확한 도출이 곤란한 경우가 있을 수도 있으므로 이러한 경우를 대비하여 Monte Carlo Simulation 기법을 도입, 비교적 합리적이고 객관적인 RMR값을 역으로 추정하고 이를 통해 설계에 필요한 지반정수를 산정하는 새로운 기법을 제안코자 한다. 이렇게 제안된 새로운 지반정수 산정기법은 수치해석결과와 현장상황의 비교분석을 통해 그 타당성이 규명될 수 있을 것이다.

• 대기
• /
• 제17권4호
• /
• pp.349-364
• /
• 2007

The main purpose of this study is to examine the sensitivity of the WRF (Weather Research and Forecasting) in the wind field to the steepness of mountains in the case with a strong downslope wind occurred in the Yeongdong province. We conducted WRF simulations for February 13 2006. The initial and boundary data are from the NCEP/NCAR $1^{\circ}{\times}1^{\circ}$ GDAS. Arbitrary terrains of the mountains with a symmetric orography and an asymmetric one with steeper leeward slope, were introduced to examine the sensitivity of the shape of the mountains. The simulation with an asymmetric terrain results in stronger maximum surface wind by about $10ms^{-1}$ than with a symmetric terrain, especially in the narrow region from the peak to ~ 4 km away in the downstream. However, the maximum surface wind speed is weaker by $20ms^{-1}$ than with a symmetric terrain away from the narrow peak region. This indicates that the steeper slope leads to the intensification of downslope wind in the narrower region leeward. In addition, for the simulation with an asymmetric terrain, the strength of wave breaking is greater and the Lee wave is more dominant than for that with a symmetric terrain.

• 한국생산제조학회지
• /
• 제21권5호
• /
• pp.767-772
• /
• 2012

Generally, abrasive fluid jet polishing system has been used for polishing of complex shape or freeform surface which has steep local slopes. In the system, abrasive fluid jet is injected through a nozzle at high pressure; however, it is inevitable to lose its coherence as the jet exits a nozzle. This problem causes incorrect polishing results because of unstable and unpredictable workpiece material removal at the impact zone. In order to solve this problem, MR fluid jet polishing method has been developed using a mixture of abrasive and MR fluid which can maintain highly collimated and coherent jet by applied magnetic field. Thus, in this study, an injection nozzle and an electromagnetic module, most important parts in the MR polishing system, were designed and verified by magnetic field and flow analysis. As the results of experiments, it can be confirmed that stable fluid jets for polishing were generated since smooth W-shapes and uniform spot size were observed regardless of standoff distance changes.

• 대한토목학회논문집
• /
• 제8권3호
• /
• pp.85-90
• /
• 1988

균질토 사면에서 파괴에 대한 확률론적모델이 제시되었다. 사면의 안전은 관례적인 안전을 보다는 파괴확률로써 측정된다. 사면파괴의 Safety Margin은 정규분포라 가정하였다. 어떤 균질한 흙층에 있어서 흙의 특성에 영향을 주는 불확실성의 원인은 본래의 공간적인 가변성, 불충분한 시료에서 오는 판단오차 그리고 실험오차등이 었다. 파괴면을 따라 존재하는 전단강도의 불확실성은 1차원 Random Field Madels로 표현되었다. 파괴aus의 양상은 대수나선 곡선을 따른다고 가정하였다. 파괴면과 그것을 따라 작용하는 힘의 통계적 특성을 유도하여 사면의 파괴확률을 계산하였다. 마지막으로 개발된 절차가 사면의 신뢰성 해석에 대한 하나의 예제 연구에 적용되었다.

• 한국농공학회논문집
• /
• 제52권3호
• /
• pp.31-38
• /
• 2010

Various fundamental and practical theories and technologies are needed for the development of Best Management Practices (BMPs) to manage the problems. The objectives of this paper was to investigate the effect of fertilizer and Non-point suource (NPS) pollution discharges from the field. The effect of fertilizer application was measured with respect to 10 % and 20 % slopes, respectively, using artificial rainfall simulator. The effect of fertilizer application on runoff was not significant because the effect of slope and rainfall intensity were overwhelmed. Runoff from 20 % plots was 21 % larger than that from 10 % plots. While groundwater discharge from 10 % plots was about 70 % larger than that from 20 % plots. It was concluded that runoff and groundwater discharge were largely affected by slope. T-N concentration in groundwater was much higher than that in runoff for both 10 % and 20 % plots. While T-P concentration in groundwater was lower than that in runoff. It explained that T-N moved well through soil pores without adsorption and other chemical reactions but T-P was well adsorbed on the surface of soil particles.

• 한국표면공학회지
• /
• 제41권1호
• /
• pp.12-15
• /
• 2008

The zinc oxide(ZnO) nanowires were deposited on Si(001) substrates by thermal chemical vapour deposition without any catalysts. SEM data suggested that the grown nanostructures were the well-aligned ZnO single crystals with preferential orientation. Back-gate ZnO nanowire field effect transistors(FET) were successfully fabricated using a photolithography process. The fabricated nanowire FET exhibits good contact between the ZnO nonowire and Au metal electrodes. Based on I-V characteristics it was found out that the ZnO nanowire revealed a characteristic of n-type field effect transistor. The drain current increases with increasing drain voltage, and the slopes of the $I_{ds}-V_{ds}$ curves are dependent on the gate voltage.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.946-956
• /
• 2008

Acoustic emission(AE) is low-energy seismic event associated with a sudden inelastic deformation such as the sudden movement of existing fractures, the generation of new fractures or the propagation of fractures. These events rapidly increase before major failure and happen within a given rock volume and radiate detectable seismic waves. Rock slopes are usually large in scale and there are many discontinuities in rock mass. AE waves are strongly attenuated when they propagate through joints. Thus we should resolve the attenuation problem to monitor large volume. In this study, we developed waveguide which is composed of two different materials, cement mortar and stainless steel rod. And several laboratory tests on developed waveguide are performed to obtain generalized AE parameters to predict the failure stage in rock slope. Comparing field data with experimental data in laboratory tests, failure stage of rock slope can be evaluated. To verify and optimize the developed monitoring method, we are now carrying out the field application at a rock slope.

• 비파괴검사학회지
• /
• 제27권6호
• /
• pp.563-575
• /
• 2007

This contribution contained the classical work of an open-hole tensile plate to demonstrate the performance of grating shearography and to compare with the results obtained by other full-field measurement techniques, The isotropic plate with an open-hole has often appeared in the previous contributions introducing novel full-field method and system. Grating shearography directly provided six quantitative measurands about the specimen's surface kinematics by using a single measurement set: three in-plane strains, in plane rotation, and two out-of-plane slopes. The quasi-plane wavefront of grating metrology led to high signal-to-noise ratio (SNR) and thus neither fitting nor filtering was applied, and the small shearing distance of $101{\mu}m$ could be used. The small shearing distance provided the outstanding spatial resolution of $80{\mu}m$ and sensitivity appropriate for experimental mechanics. Finally, the grating shearography enabled the visualization of the complex surface deformation around the hole and also detected parasitic flexions of the specimen in the micrometer regime during the tensile test.

• Wind and Structures
• /
• 제28권5호
• /
• pp.331-345
• /
• 2019

Long-span bridge decks are often shaped as streamlined to improve the aerodynamic performance of the deck. There are a number of important shaping parameters for a streamlined bridge deck. Their effects on aerodynamics should be well understood for shaping the bridge deck efficiently and for facilitating the bridge deck design procedure. This study examined the effect of various shaping parameters such as the bottom plate slope, width ratio and side ratio on aerodynamic responses of single box streamlined bridge decks by employing unsteady RANS simulation. Steady state responses and flow field were analyzed in detail for wide range of bottom plate slopes, width and side ratios. Then for a particular deck shape Reynolds number effect was investigated by varying its value from $1.65{\times}10^4$ to $25{\times}10^4$. The aerodynamic response showed very high sensitivity to the considered shaping parameters and exhibited high aerodynamic performance for a particular combination of shaping parameters.