• 대한전자공학회논문지SD
• /
• 제48권12호
• /
• pp.8-14
• /
• 2011

본 논문에서는 이차원 소자 시뮬레이션을 활용하여 주어진 게이트-드레인 간격에서 AlGaN/GaN-on-Si HEMT (high electron mobility transistor) 의 고항복전압 구현을 위한 게이트 전계판의 최적화 구조를 제안하였다. 게이트 전계판 구조를 도입하여 게이트 모서리의 전계를 감소시켜 항복전압을 크게 증가시킬 수 있음을 확인 하였으며, 이때 전계판의 길이와 절연막의 두께에 따라 게이트 모서리와 전계판 끝단에서 전계분포의 변화를 분석하였다. 최적화를 위하여 시뮬레이션을 수행한 결과, 1 ${\mu}m$ 정도의 짧은 게이트 전계판으로도 효과적으로 게이트 모서리의 전계를 감소시킬 수 있으며 전계판의 길이가 너무 길어지면 전계판과 드레인 사이의 남은 길이가 일정 수준 이하로 감소되어 오히려 항복전압이 급격하게 감소함을 보였다. 전 계판의 길이가 1 ${\mu}m$ 일 때 최대 항복전압을 얻었으며, 게이트 전계판의 길이를 1 ${\mu}m$로 고정하고 $SiN_x$ 박막의 두께를 변화시켜본 결과 게이트 모서리와 전계판 끝단에서의 전계가 균형을 이루면서 항복전압을 최대로 할 수 있는 최적의 $SiN_x$ 박막 두께는 200~300 nm 인 것으로 나타났다.

• Journal of Astronomy and Space Sciences
• /
• 제37권2호
• /
• pp.77-84
• /
• 2020

We performed high-resolution three-dimensional global magnetohydrodynamic (MHD) simulations to study the interaction between the Earth's magnetosphere and a prolonged steady southward interplanetary magnetic field (IMF) (Bz = -2nT) and slow solar wind. The simulation results show that dayside magnetic reconnection continuously occurs at the subsolar region where the magnetosheath magnetic field is antiparallel to the geomagnetic field. The plasmoid developed on closed plasma sheet field lines. We found that the vortex was generated at the magnetic equator such as (X, Y) = (7.6, 8.9) R_E due to the viscous-like interaction, which was strengthened by dayside reconnection. The magnetic field and plasma properties clearly showed quasiperiodic variations with a period of 8-10 min across the vortex. Additionally, double twin parallel vorticity in the polar region was clearly seen. The peak value of the cross-polar cap potential fluctuated between 17 and 20 kV during the tail reconnection.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.172-176
• /
• 1997

It is likely that the corona discharge appears due to the motion and the multiplication of electron and ion under the nonuniform electric field. Because the motion and the multiplication of electron and ion are the function of electric field, for the simulation of the corona discharge, we have to calculate the electric field, before the calculation of the motion and the multiplication of electron and ion. In this paper, the electric field is calculated on the assumption that the gap between a hyperboloidal needle and a plane is 1-dimension, and the motion and the multiplication of electron and ion are determined by Flux-Corrected Transport method. For this purpose, we solve the electron and ion continuity equation together with Poisson equation. We calculated the current density and the electron and ion density distributions between electrodes as well as electric field distortion due to the space charge assuming that the discharge channel radius is 100${\mu}{\textrm}{m}$. In this simulation, it is found that the current density has one peak as observed by experiment, and electric field distortion is important to the formation and the stability of the corona discharge.

• 농업과학연구
• /
• 제45권1호
• /
• pp.120-127
• /
• 2018

The rural labor force has gradually been decreasing due to the decrement of the farm population and the increment of the aging population. To solve these problems, it is necessary to develop and study autonomous agricultural machinery. Therefore, analyzing the dynamic behavior of vehicles in an autonomous agricultural environment is important. Until now, most studies on agricultural machinery, especially on ground vehicle dynamics, have been done by field tests. However, these field test methods are time consuming and costly with seasonal restrictions. A research method that can replace existing field test methods by using simulations is needed. In this study, we did basic research analyzing the effect of the travelling speed of a tractor on tire slip using simulation software. A tractor simulation model was developed based on field conditions following a straight path. The simulation was done for three ranges of speed: 20 - 30 km/h (considered the normal travelling speed range), 6 - 8 km/h (considered the plow tillage speed range) and 2 - 4 km/h (considered the rotary tillage speed range). The results of the simulation show that the slip ratio and slip angle values tended to increase as the traveling speed range of the tractor decreased. From the simulation results, it can be concluded that at low tractor speeds, it becomes more difficult to control the vehicle path. In future research, simulations will be done with various work environments such as a curved path as well as with various friction coefficient conditions, and the simulation results will be experimentally verified by applying them to an agricultural tractor.

• 한국전자파학회논문지
• /
• 제26권10호
• /
• pp.907-913
• /
• 2015

본 논문은 회로 시뮬레이션과 전자기 시뮬레이션을 병행하여 디지털 스위칭 회로가 실장된 PCB 상의 근접 자계 분포를 예측하는 방법을 제시한다. 제안 방법은 스위칭 회로의 신호 및 전원 포트를 정현 전원으로 구동하여 규격화된 근접 자계 분포를 구하고, 이 결과를 실제 스위칭 회로에 의한 전류의 주파수 스펙트럼으로 가중하여 근접 자계를 예측한다. 예측 방법론을 검증하기 위해 링 발진기와 출력 버퍼로 구성된 스위칭 집적 회로를 제작하고, 칩-온-보드(Chip On Board, 칩-온-보드) 형태로 평가하였다. 자계 프로브를 이용하여 PCB상에서 표면 자계 분포를 측정하였으며, 시뮬레이션 결과와 비교하였다. 측정 결과와 시뮬레이션 계산 결과는 5차 하모닉 주파수까지 10 dB 이내로 일치함을 확인하였다.

• 한국시뮬레이션학회논문지
• /
• 제25권2호
• /
• pp.1-11
• /
• 2016

Floor Field Model(이하 FFM)은 보행자의 행동을 모델링하기 위한 Cellular Automata(이하 CA) 기반 보행모델이다. FFM에 대한 기존 연구들은 간단한 구조(하나의 방 혹은 방 안에 장애물이 있는 경우), 다소 복잡한 구조(여러 개의 방을 가지는 경우) 등에 대한 실험을 진행하였다. 다만, 실제 건물에 FFM을 적용하기 위해서는 다수의 방, 층, 계단, 출입문 등에 대한 정보들을 처리하기 위한 추가적인 방법론이 요구된다. 특히 이 과정에서 출입문에 대한 처리가 필요하다. 보행자들이 인지하는 출입문은 방의 출입문, 복도와 연결된 계단, 건물의 출입문 등 여러 종류가 있다. FFM에서는 Static Floor Field(이하 SFF)를 계산할 때, 출입문에 대한 정보가 필요하며, 앞서 언급한 출입문 중 어떤 것을 이용하여 SFF를 계산하는지에 따라 시뮬레이션 결과가 달라진다. 본 연구에서는 FFM에서 요구하는 데이터 구조에 따른 XML 형태의 건물 데이터 모델을 제시한다. 또한, 다수의 출입문을 처리하는 방법론을 정의한다. 이에 따라 건물 데이터 구축 및 대피시뮬레이터를 개발하였으며, 대학 캠퍼스 건물에 대해 시뮬레이션 실험을 수행하였다.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.445-450
• /
• 2001

The objective of this study is to develop the GLEAMS-PADDY model for nutrients loading simulation from paddy-field areas. This model is developed by modifying the GLEAMS model. The model is composed of hydrology, sediment and chemical parts. The model was evaluatd using field data. The model estimates water balance and nutrients concentrations reasonably well. The model can be applied to find BMP's in the paddy areas.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1987-1989
• /
• 2000

In this paper, electric field distribution of dielectric sphere considering surface or volume resistivity is analysed by the use of rotational symmetric charge simulation method. We applied three methods such as ${\alpha},{\beta}$ modified $\beta$ method to check electric field calculation error. We find f method and modified $\beta$ method are suitable to simulate volume and surface resistivity respectively.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.297-300
• /
• 2008

High-resolution mesoscale meteorological modeling requires more accurate and higher resolution digital elevation model (DEM) data. Shuttle Radar Topographic Mission (SRTM) has created 90 m DEM for entire globe and that is freely available for meteorological modeling and environmental applications. In this research, the effects of the topographic interpolation methods on high-resolution wind field simulation in the coastal regions were quantitatively analyzed using Weather Research and Forecasting (WRF) model with SRTM data. Sensitivity experiments with three different interpolation schemes (four-point bilinear, sixteen-point overlapping parabolic and nearest neighbor interpolation methods) were preformed using SRTM. In WRF modeling with sixteen-point overlapping parabolic interpolation, the coastal line and some small islands show more clearly than other cases. The maximum height of inland is around 140 meters higher, while the minimum of sea height is about 80 meter lower. As it concerns the results of each scheme it seems that the sixteen-point overlapping parabolic scheme indicates the well agreement with observed surface wind data. Consequently, topographic changes due to interpolation methods can lead to the significant influence on mesoscale wind field simulation of WRF modeling.

• 대한전자공학회논문지
• /
• 제26권12호
• /
• pp.1947-1955
• /
• 1989

With the increasing complexity of cabling at sensory level in process control and manufacturing automation, field buses were introduced to replace the traditional point to point links from each sensor or acruator to its controlling equipments by a single link on which all information is transmitted seriall and multiplexed in time. In this papr, we introduce the BITBUS network as a field bus. For the service discipline of the BITBUS network, two service strategies are proposed to obtain the performance of the network. They are the equal priority cyclic service strategy and the non-equal priority cyclic service strategy. The former assigns equal priority to each node for polling and the latter assumes non-equal priority. The BITBUS network was modeled as a cyclic queueing model and it is analyzed by two methods: the Kuehn's and the Boxma's. Computer simulation was also done for the cyclic queueing model and simulation results were compared with those. Under mathematically non-analyzable environment, only the computer simulation was done. From the simulation result, in order to meet the response time requirement of 5 msec imposed by International Electrotechnical Commission when each node has the average traffic of 5000 messages/sec in manufacturing automation the number of slave nodes should be smaller than 10 at the transmission rate of 2.5 Mbps.