• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.2
• /
• pp.110-115
• /
• 2014

The reconfigurability of FPGA devices allows designers to evaluate, test and validate a new control algorithm; a new component or prototypes without damaged the real system with the so-called hardware co-simulation. The present paper uses the Xilinx System Generator (XSG) environment to establish and validate a new nonlinear estimator for the rotor time constant inverse that will be exploited to improve the indirect rotor field control of induction motor.

• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.122-125
• /
• 1991

This paper deals with hysteresis losses on the superconducting slap by using type II superconducting theory and classical maxwell equations. Transport current is transmitted to the longitudual direction and applied magnetic field is perpendicular to the slap length and simultaneously parallel to the plat. And the sinusoidal transport currents and the magnetic fields are applied to the slap. Properties of hysteresis loss can be understood, using computer simulation with apply field, transport current and phasor difference. From this result the efficiency and the stability of superconducting system can be enhanced.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.163-165
• /
• 1996

In the PIC simulation of plasma, the fields are commonly calculated on uniform spatial grids using FDM. But, FDM has a difficulty in modeling a complex shaped model. FEM has a good flexibiblity in treating a complex shape, so that we calculated the field by using FEM not FDM. In this paper, the plasma between plane-to-plane electrodes was simulated using FEM and FDM. Comparing the results of those two methods told us that FEM is also valid as a calculating method in PIC plasma simulation. In order to verify the use of FEM, the discharge of rod-to-plane was simulated. There was not a little distortion of the electric field between the electrodes due to the distribution of space charges.

• 한국전기화학회:학술대회논문집
• /
• 2002.07a
• /
• pp.189-192
• /
• 2002

An analytical study on BMFCS was carried out by employing the computational fluid dynamics(CFD) method. In this study, the commercial CFD code Fluent(ver. 5.5) was used, and many assumptions were adopted to simplify the situation in the fuel cell. From the simulation, many valuable informations were obtained in terms of distributions of velocity, pressure, temperature, density and current density over the flow field. And thus, it was anticipated that the simulation results were very helpful in developing DMFCs by facilitate optimization of structures of electrodes and flow field of the separator.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2001.01a
• /
• pp.230-236
• /
• 2001

In this paper, we explored the possibilities of embedding Qualitative Reasoning techniques, the Qualitative Process Theory (QPT), and its implementation in the field of inorganic chemistry. The target field of implementation is Qualitative Chemical Analysis and Laboratory Simulation. By embedding such technique in this education software we aim to combine theory and practice into a single package. The system, are able to generate reasoning and explanation based on chemical theories, helping student in mastering basic chemistry knowledge and practical skill as well. We also review the suitability of embedding QPT techniques into chemistry in general, by comparing some examples from both fields.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.2
• /
• pp.168-175
• /
• 2020

Failure of essential avionic equipments have a significant impact on the operations and safety of P-3 maritime patrol aircraft. Therefore, avionic equipments of P-3 are required to have higher reliability. Based on the field failure data, this paper studies the reliability growth of essential avionic equipments in P-3 using Duane model. Additionally, a simulation model is built and implemented for identifying the operational availability according to the field failure data of avionic equipments.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.249-253
• /
• 2005

The turbulence noise generated from blunt trailing-edge is numerically predicted by using the hydrodynamic/acoustic splitting method at the Reynolds number based on thickness of flat plate, $Re_h=1000$, and the freestream Mach number $M_o=0.2$. The turbulent flow field is simulated by incompressible large-eddy simulation and the acoustic field is predicted efficiently with the linearized perturbed compressible equations (LPCE) recently proposed by the authors. The turbulent flow characteristics are validated with the results of the previous experimental study and direct numerical simulation. The acoustic properties predicted from LPCE are compared with the solutions of analytical formulations.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2001.11a
• /
• pp.14-21
• /
• 2001

Recently, with the increasing of construction works, large construction equipment are used to reduce the term of work and labor cost in construction field. Therefore, construction equipment noise has caused much annoyance for a number of dweller in nearby construction field and it has become a very serious problem in our living environment. Nevertheless, in our country, adequite guidelines for the construction equipment noise are very deficiency because of the lack of basic data and insufficient research works. From this point of view, this study attempts to survey the characteristics and prediction of SIP piling noise. On the basis of measurement value, we analysed about prediction possibility of SIP piling noise by computer simulation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.3
• /
• pp.201-207
• /
• 2015

In this paper, in order to avoid equipment malfunction due to electromagnetic waves, which can occur when high-voltage live line diagnostic device fabrication, the enclosure structure of the diagnostic device with power lines that can minimize the EMI (electromagnetic interference) was modeled using the FEM (finite element method). Simulation examined the strength of the electric field in the required thickness, material and regions where there is a control board while changing the curvature radius of the corner making the enclosure, and By applying a mechanical design and simulation results that occur during the actual production has been designed for the final design. Most of the simulation results for the electric field is concentrated in the final model, the inner edge of the enclosure could be confirmed that the stable structure.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.105.5-105
• /
• 2001

This paper describes a fuzzy steering controller for an autonomous mobile robot with MR sensor. Using the magnetic field(Bx, By, Bz) obtained from the MR sensor, we designed fuzzy controller for driving on the road center. Fuzzy rule base was built to magnetic field(Bx, By, Bz). To develop an autonomous mobile robot simulation program, we have done modeling MR sensor, dynamic model of mobile robot and coordinate transformation. A computer simulation of the robot including mobile robot dynamics and steering was used to verify the steering performance of the mobile robot controller using the fuzzy logic Good results were obtained by computer simulation. So, we confirmed the robustness of the proposed fuzzy controller by computer ...