• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.892-897
• /
• 2003

This study deals with the performance of a simplified test apparatus for measurement of sound insulation of panels. In order to investigate its performance, results from experiment and theory of the sound transmission loss for single and double panels are compared. Comparative results show that in evaluation of the sound insulation performance, the test apparatus has a cumbersome problem at the low frequency region, i.e. below 315 ㎐, presumably because of the poor diffuse sound field in the chambers. Meanwhile at the high frequency, it shows a considerable results comparable to the theoretical prediction. One of the objective of this study that compares measured results between a real reverberation chamber and a simplified test apparatus, by using a specimen of a sandwich panel. It shows qualitatively resonable agreement from which one can find a potential to provide a design tool.

• ETRI Journal
• /
• 제19권3호
• /
• pp.259-280
• /
• 1997

This paper briefly explains the configuration of CDMA Mobile System (CMS) test bed. The measured fading and delay results of CDMA signal in Taejon area are shown. In comparison to other cellular systems, there are more parameters in the CDMA systems that affect system performance and capacity. We performed the optimization test of the selected parameters and present the effect of each parameter on the performance. This paper presents the capacity and performance test results of CMS. The capacity test was performed on ETRI site of three sectors in Taejon area. The performance tests include call completion rate, busy hour call attempt, and the delay characteristics of voice.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.699-704
• /
• 2004

As being inconvenient to apply reinforced concrete structure to high-rise buildings, it is applied steel structured system. Therefore light-weight wall systems are applied as partition wall to reduce the self-load of the building. But, the required performances of a light-weight wall are not evaluated systematically. As a field survey result, partition walls of house-to-house were not showed their respected performances, so the dwellers are feel so worse the quality of the whole building. In steel-structured high-rise buildings especially, occupant's dissatisfaction concerned indoor noise was high because curtain wall systems having a high air-tight performance isolate the outdoor noise making masking effect. Therefore wall systems which have high performances of sound insulation and air-tightness are required in high-rise buildings. As a result, a new drywall system was presented and the performance was verified with field test.

• Smart Structures and Systems
• /
• 제32권2호
• /
• pp.111-121
• /
• 2023

This study proposes an automated assembly performance evaluation method for prefabricated steel structures (PSSs) using machine learning methods. Assembly component images were segmented using a modified version of the receptive field pyramid. By factorizing channel modulation and the receptive field exploration layers of the convolution pyramid, highly accurate segmentation results were obtained. After completing segmentation, the positions of the bolt holes were calculated using various image processing techniques, such as fuzzy-based edge detection, Hough's line detection, and image perspective transformation. By calculating the distance ratio between bolt holes, the assembly performance of the PSS was estimated using the k-nearest neighbors (kNN) algorithm. The effectiveness of the proposed framework was validated using a 3D PSS printing model and a field test. The results indicated that this approach could recognize assembly components with an intersection over union (IoU) of 95% and evaluate assembly performance with an error of less than 5%.

• 한국융합학회논문지
• /
• 제10권4호
• /
• pp.195-201
• /
• 2019

유산소성 운동수행능력의 필드테스트로 대표되는 셔틀런 테스트와 요요테스트를 최대산소섭취량 및 다른 주행테스트들과 비교 검토함으로써 대학 축구선수들의 심폐지구력을 평가하는 유효한 필드테스트를 제안하는 것을 목적으로 하였다. 셔틀런 테스트는 휴식구간이 없이 지속적으로 달려야 하는 반면 요요 테스트의 경우 휴식구간이 설정되어 있어 휴식기를 활용하여 컨디션을 조절하며 주행한다는 특성이 있다. 따라서 요요테스트는 주행과 회복을 반복하는 간헐적 운동을 주로 하는 축구선수들의 종목 특성을 고려한 심폐기능 평가 시 보다 효율적인 현장검사로 활용될 수 있을 것이다.

• 전력전자학회논문지
• /
• 제5권5호
• /
• pp.515-521
• /
• 2000

본 논문은 전동차용 추진장치인 IGBT VVVF 인버터의 현차시험에 관한 것이다. IGBT VVVF인버터는 1,650kVA급으로 개발되었다. 추진 인버터의 신뢰성과 성능을 확인하기 위하여 서울시 지하철 6호선에서 본선시험을 하였다. 시험 차량구성은 4M4T로 구성되었으며, 전장품은 4대의 VVVF인버터, 16대의 견인전동기 및 2대의 SIV로 구성하였다. 추진장치는 1C4M으로 구성하였다. 현차시험을 통하여 추진용 인버터의 우수한 가·감속 능력과 가가속도 특성 및 구배에서의 등판능력을 확인 할 수 있었다.

• 산업기술연구
• /
• 제23권A호
• /
• pp.149-156
• /
• 2003

The development and maintenance of a sound bond are essential requirements of concrete repair and replacement. The bond property of a overlay to its substrate concrete during the lifetime is one of the most important performance requirements which should be quantified. A standard or a verified bond strength measurement method is required at field for screening, selecting materials and quality control for overlay or repair materials, but no test method has been adopted as a standard. In this study, a concrete pull off bond strength measurement method for field application is proposed and evaluated. This study compares the splitting tensile test, slant shear test, nipple pipe direct tensile test, flexural adhesion test, briquette tensile test, jumbo nail pull-out test and core pull-off test with their test procedures. From these comparison and investigation, core pull-off test is selected as a main topic of this study because of it's suitability for in situ testing, simplicities in field application and clearness at interface boundary condition. Thus, the proposed core pull off test is evaluated to be the most appropriate method for field application in a simple manner. The fracture surface and fracture mode could be easily determined by visual observation of failure surface of the field specimen. The core pull off test was found to be sensitive to surface condition and latex contents at latex modified concrete.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2107-2114
• /
• 2011

To carry out the evaluation of performance of railway product/system, 3 step verification process(design review-lab test-field test) should be done. In advanced countries, for the effective field test, test-only-oriented track have been constructed and used. In Korea, government announced "The construction plan of railroad test track" at 2009.06. This paper will summarize 'need of test track', 'technical meaning of test track', 'current status of foreign test track', 'fundamental plan and process strategy of Korea Railroad Test Track'. It is no need to say that the wisdom of all railroad related people is required for the successful construction and usage of Korea Railroad Test Track.

• 한국도로학회논문집
• /
• 제14권3호
• /
• pp.59-67
• /
• 2012

본 연구는 아스팔트 포장 파손을 복구하는 보수재료에 대한 연구이다. 현재 국내에서 사용되고 있는 네가지 종류 재료들에 대하여 실내 및 현장시험을 실시하였다. 실내 시험으로 마샬안정도시험, 간접인장시험, 수침잔류 안정도시험, 휠트랙킹 시험을 실시하였다. 또한 성능시험으로는 기존 아스팔트 콘크리트 혼합물과의 수평전단강도시험을 실시하였다. 현장시험은 아스팔트 포장 도로상에서 차량바퀴가 통과하는 지점에 패칭 슬래브를 제작하여 차량 통과에 따른 공용 결과를 관찰하였다. 실내시험 결과는 현재 적용되고 있는 설계 재료들의 기준은 수침잔류 안정도를 제외하고 만족하였다. Type C가 가장 높은 수평전단강도를 나타냈다. 그러나 시공후 10일 이후부터 소성변형과 탈리와 같은 파손이 발생하였다. 따라서 현재 사용되고 있는 상온보수 재료들을 현장에 적용할 경우에 우수한 성능을 기대할 수 없어서 조기파손을 방지할 수 있는 새로운 시험방법의 개발과 적용이 필요하다.

• 오토저널
• /
• 제7권3호
• /
• pp.56-63
• /
• 1985

The strength of the mounting bolt of a backing plate is investigated with field test to provide the basic data in the safety evaluation of the wheeled vehicle. As a result, during the braking performance test at a vehicle speed of 32km/h, the shearing stress of mounting bolt is 20.5kg/mm$^{2}$ because the translatory mass of the vehicle is increased 21.6 per cent to incorporate the rotating-mass effect of wheels and other permanently engaged rotating parts.