• 한국전자파학회논문지
• /
• 제16권12호
• /
• pp.1222-1228
• /
• 2005

본 논문은 MWO(Microwave Oven)의 동작 주파수로 사용되는 2.45 GHz 대역에서, 전자파 잔향실 내의 전기장특성 향상 및 시험 공간 확장에 관한 연구이다. 잔향실 내부에서의 전자기장 균일성을 확보하기 위하여, Sch-roeder 방식의 Quadratic Residue 확산기(diffuser)를 사용하였고, 전자기장 분포 해석을 위해 FDTD(Finite Difference Time Domain) 수치 해석 방식을 이용하였다. 잔향실 내부의 확산기는 도체로만 설계된 것(Type 1)과 유전체 및 도체를 같이 사용한 것(Type 2, 3)으로 설계하였다. 해석 결과 유전체를 사용한 확산기는, 유전체 없는 확산기의 전기장 특성을 유지하면서 확산기의 물리적 크기를 줄일 수 있었고, 특히 Type 3 확산기에서는 동일한 물리적 공간에 더 많은 주기의 확산기를 설계할 수 있어, 시험 공간 확장, 잔향실의 편파 특성, 편차 및 공차등의 성능이 가장 좋은 것을 확인하였다.

• 대한전자공학회논문지TC
• /
• 제44권12호
• /
• pp.79-84
• /
• 2007

본 논문에서는 CRD(Cubical Residue Diffuser)를 이용하여 전자파 잔향실 내의 전기장 균일도를 향상시키고, 잔향실 내의 전기장 균일도가 최적화되는 CRD 면적비를 연구하였다. $1\sim3$ GHz 주파수 대역에서 Schroeder 방식의 CRD를 설계하였고, 전자파 잔향실 내의 전기장 분포 해석을 위해 FDTD(Finite Difference Time Domain) 수치해석이 이루어졌다. 해석결과 2 GHz에서 CRD의 면적이 잔향실 한쪽 내벽의 약 $40\sim80%$일 경우 전기장 강도 표준 편차가 낮고 균일하게 분포되었으며, 40 % 이하, 또는 80 % 이상의 면적에서는 표준 편차가 높게 나타났다. 특히 가장 나쁜 경우와 비교하여 44%일 때 전기장 균일도가 1 dB 향상됨을 알 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1408-1409
• /
• 2011

Carbon nanotubes (CNTs) were grown on conical tip substrates by using various methods such as electrophoretic deposition, dip-coating, and spray. The scanning electron microscope measurement showed that the spray method ascertained the most uniform deposition of CNTs. The CNT-emitter that was fabricated by the spray method revealed the lowest turn on voltage of electron emission and the highest emission current. In addition, the spray-produced CNT emitter showed the most stable long-term emission characteristics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1410-1411
• /
• 2011

Tip-type carbon nanotube(CNT) based electron emitters were fabricated by forming a hafnium(Hf) interlayer between the CNT and the substrate. The CNTs were deposited by using the electrophoretic deposition method and thermally treated. No significant change in the microscopic structure of the CNTs, such as the ratio of length to diameter, was observed after the deposition of Hf interlayer and thermal treatment. As compared with the CNT emitter without the Hf-interlayer and thermal treatment, the CNT emitter with the Hf-interlayer and thermal treatment showed noticeably improved electron-emission properties due to the enhanced adhesion.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.581-584
• /
• 2003

The phase differences and noise signals are in general serious on output of a instrumentation amplifier for signal conditioning of a sensor driven at high frequency due to a time-varying input signal. In this study, we get the better amplification and S/N ratio using the rectified signal for the input of instrumentation amplifier. This driving circuits were designed and constructed by OrCAD and laboratory PCB process. All of the elements used on the circuit including highly speedy OP-Amp. was SMD type and the MI sensor was fabricated by meander-patterned amorphous ribbon. The output sensitivity of this circuit was $105.3mV/V{\cdot}Oe$. That's why this driving circuit is good at detection of fine magnetic field.

• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.1921-1927
• /
• 2014

A new method for optimizing the magnetic field gradient in the exciting coil of electronic anti-fouling (EAF) system is presented based on changing exciting coil size. In the proposed method, two optimization expressions are deduced based on biot-savart law. The optimization expressions, which can describe the distribution of the magnetic field gradient in the coil, are the function of coil radius and coil length. These optimization expressions can be used to obtain an accurate coil size if the magnetic field gradient on a certain point on the coil's axis of symmetry is needed to be the maximum value. Comparing with the experimental results and the computation results using Finite Element Method simulation to the magnetic field gradient on the coil's axis of symmetry, the computation results obtained by the optimization expression in this article can fit the experimental results and the Finite Element Method results very well. This new method can optimize the EAF system's anti-fouling performance based on improving the magnetic field gradient distribution in the exciting coil.

• 반도체디스플레이기술학회지
• /
• 제9권1호
• /
• pp.41-47
• /
• 2010

The effects of thermal treatment on CNTs, which were coated with a-$CN_x$ thin film, were investigated and related to variations of chemical bonding and morphologies of CNTs and also properties of field emission induced by thermal treatment. CNTs were directly grown on nano-sized conical-type tungsten tips via the inductively coupled plasma-chemical vapor deposition (ICP-CVD) system, and a-$CN_x$ films were coated on the CNTs using an RF magnetron sputtering system. Thermal treatment on a-$CN_x$ coated CNT-emitters was performed using a rapid thermal annealing (RTA) system by varying temperature ($300-700^{\circ}C$). Morphologies and microstructures of a-$CN_x$/CNTs hetero-structured emitters were analyzed by FESEM and HRTEM. Chemical composition and atomic bonding structures were analyzed by EDX, Raman spectroscopy, and XPS. The field emission properties of the a-$CN_x$/CNTs hetero-structured emitters were measured using a high vacuum (below $10^{-7}$ Torr) field-emission measurement system. For characterization of emission stability, the fluctuation and degradation of the emission current were monitored in terms of operation time. The results were compared with a-$CN_x$ coated CNT-emitters that were not thermally heated as well as with the conventional non-coated CNT-emitters.

• 반도체디스플레이기술학회지
• /
• 제8권4호
• /
• pp.65-69
• /
• 2009

Carbon nanotubes (CNTs) were coated with undoped zinc oxide (ZnO) or 5 wt% gallium-incorporated ZnO (GZO) using various deposition conditions. The CNTs were directly grown on conical-type tungsten substrates at $700^{\circ}C$ using inductively coupled plasma-chemical vapor deposition. The pulsed laser deposition technique was used to deposit the ZnO and GZO thin films with very low stress. Field-emission scanning electron microscopy and high-resolution transmission electron microscopy were used to monitor the variations in the morphology and microstructure of CNTs prior to and after ZnO or GZO coating. The formation of ZnO and GZO films on CNTs was confirmed using energy-dispersive x-ray spectroscopy. In comparison to the as-grown (uncoated) CNT emitter, the CNT emitter that was coated with a thin (10 nm) GZO film showed remarkably improved field emission characteristics, such as the emission current of $325\;{\mu}A$ at 1 kV and the threshold field of $1.96\;V/{\mu}m$ at $0.1\;{\mu}A$, and it also exhibited the highly stable operation of emission current up to 40 h.

• 한국환경농학회지
• /
• 제39권3호
• /
• pp.237-245
• /
• 2020

BACKGROUND: The closed chamber method is the most commonly used for measuring greenhouse gas emissions from upland fields. This method has the advantages of being simple, easily available and economical. However, uncertainty estimation is essential for accurate assessment of greenhouse gas emissions and verification of emission reductions. The nitrous oxide emissions from upland field is very important for the nitrogen budget in the agriculture sectors. Although assessment of uncertainty components affecting nitrous oxide emission from upland field is necessary to take account of dispersion characteristics, research on these uncertainty components is very rare to date. This study aims at elucidation of influencing factors on measurement uncertainty of nitrous oxide concentrations measured by an automated open closed chamber method from upland field. METHODS AND RESULTS: The nitrous oxide sampling system is located in the upland field in Gyeonggi-do Agricultural Research and Extension Services (37°13'22"N, 127°02'22"E). The primary measurement uncertainty components influencing nitrous oxide concentrations (influencing factors) investigated in this research are repeatability, reproducibility and calibration in the aspects of nitrous oxide sampling and analytical instrumentation. The magnitudes of the relative standard uncertainty of each influencing factor are quantified and compared. CONCLUSION: Results of this study show what influencing factors are more important in determination of nitrous oxide concentrations measured using the automated open closed chambers located in the monitoring site. Quantifying the measurement uncertainty of the nitrous oxide concentrations in this study would contribute to improving measurement quality of nitrous oxide fluxes.

• 한국광학회지
• /
• 제30권6호
• /
• pp.237-242
• /
• 2019

가상현실 기기의 렌즈는 사용자의 편의성을 위한 적은 부피와 높은 현실감을 위한 넓은 시야각을 동시에 만족시켜야 하기 때문에 왜곡 수차가 필연적으로 발생하는데, 일반적인 렌즈보다 시야각이 넓고 왜곡 수차가 크기 때문에 측정이 어렵다. 본 논문에서는 가상현실 기기의 특성을 고려한 두 가지 왜곡 측정 방법을 제안하였다. 하나는 카메라 교정 방법 기반의 다중 이미지를 이용한 왜곡 측정법이며, 또 다른 하나는 카메라를 포함한 측정부를 직접 회전시켜 왜곡을 측정하는 다중 측정점을 이용한 왜곡 측정법이다. 제안된 방법들의 검증을 위해 시판된 가상현실 기기인 Google Cardboard 제품의 왜곡을 측정하고 설계 데이터를 통한 시뮬레이션 결과와 비교하였으며, 두 방법으로 측정된 왜곡 값은 시뮬레이션 결과와 비교했을 때 잘 부합하는 것으로 나타났다.