• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.5
• /
• pp.57-75
• /
• 2011

The purpose of this study is to find ways of evaluating the suitability of sites being considered for development of different types of parks in the vicinity of yangmock-myun kyoung buk, where a large project(as large as about14.0$km^2$) has been planned. The results are as follows. Three surveys for selecting the assessment indicators were performed. ${\cdot}$ The first survey analyzed the importance of 23 selected assessment indicators based on a review of existing literature review and an on-the-spot research. ${\cdot}$ The second survey selected assessment indicators for each park type. ${\cdot}$ The third survey computed additive values of selected assessment indicators by the park types. It used a method of standardizing the average importance of indicators by making their sum equal to 10. These additive values were then multiplied by each grade of indicators to make a final evaluation. An evaluation of the site-suitability of park types was performed twice. The purpose of the first evaluation was to figure out how much each type met the minimum requirements targeted for all landscape types. The minimum requirements were derived by using a relative comparison between the standard of value rating of the assessment indicators, which was over the medium magnitude on the importance analysis, and the result of field research. A second evaluation estimated the targeted sites that met the minimum requirements. Value ratings of second assessment indicators were quantitatively divided as 1 to 3 grade and the evaluation scores were added, giving an additive value for each assessment indicator. The evaluation score on each park type was rated on a scale of 1 to 3 according to their averages, (from lowest to highest). Since this evaluation model of the site suitability on park types only focused on the 'face' of space in this study, additional analysis is necessary for setting the evaluation model and incorporating the overall impact of space, network connection and other factors, considering 'spot', 'line' and 'face' aspects of space.

• Journal of radiological science and technology
• /
• v.34 no.3
• /
• pp.239-244
• /
• 2011

In this study, we evaluated diffusion weighted imaging (DWI) to investigate whether the DWI parameters can predict characteristic parameters on pathologic specimens of tumor or not. CFPAC-1 was injected subcutaneously on the back flank of athymic nude mice (n=13) then two tumors were initiated on each mouse (2${\times}$13=26 tumors). The mice were sacrificed to make specimen immediately after initial MR imaging then were compared with the MR image. A dedicated high-field (7T) small-animal MR scanner was used for image acquisitions. A T1 and T2 weighted axial image using RARE technique was acquired to measure the T2 values and tumor size. DWI MR was performed for calculating ADC values. To evaluate tumor cellularity and determine the levels of MVD, tumor cells were excised and processed for H-E staining and immunostaining using CD31. T2 values and ADC values were computed and analyzed for each half of the tumors and compared to the correlated specimens slide. Median ADC within each half of mass was compared to the cellularity and MVD in the correlated area of pathologic slide. The mean of ADC value is $0.7327{\times}10^{-3}$ $mm^2/s$ and standard deviation is $0.1075{\times}10^{-3}$ $mm^2/s$. There is a linear relationship between ADC value and tumor necrosis (R2=0.697, p< 0.001). DW image parameters including the ADC values can be utilized as surrogate markers to assess intratumoral neoangiogenesis and change of the internal structure of tumor cells.

• Korean Journal of Remote Sensing
• /
• v.27 no.2
• /
• pp.191-201
• /
• 2011

Soybean has widely grown for its edible bean which has numerous uses. Microwave remote sensing has a great potential over the conventional remote sensing with the visible and infrared spectra due to its all-weather day-and-night imaging capabilities. In this investigation, a ground-based polarimetric scatterometer operating at multiple frequencies was used to continuously monitor the crop conditions of a soybean field. Polarimetric backscatter data at L, C, and X-bands were acquired every 10 minutes on the microwave observations at various soybean stages. The polarimetric scatterometer consists of a vector network analyzer, a microwave switch, radio frequency cables, power unit and a personal computer. The polarimetric scatterometer components were installed inside an air-conditioned shelter to maintain constant temperature and humidity during the data acquisition period. The backscattering coefficients were calculated from the measured data at incidence angle $40^{\circ}$ and full polarization (HH, VV, HV, VH) by applying the radar equation. The soybean growth data such as leaf area index (LAI), plant height, fresh and dry weight, vegetation water content and pod weight were measured periodically throughout the growth season. We measured the temporal variations of backscattering coefficients of the soybean crop at L, C, and X-bands during a soybean growth period. In the three bands, VV-polarized backscattering coefficients were higher than HH-polarized backscattering coefficients until mid-June, and thereafter HH-polarized backscattering coefficients were higher than VV-, HV-polarized back scattering coefficients. However, the cross-over stage (HH > VV) was different for each frequency: DOY 200 for L-band and DOY 210 for both C and X-bands. The temporal trend of the backscattering coefficients for all bands agreed with the soybean growth data such as LAI, dry weight and plant height; i.e., increased until about DOY 271 and decreased afterward. We plotted the relationship between the backscattering coefficients with three bands and soybean growth parameters. The growth parameters were highly correlated with HH-polarization at L-band (over r=0.92).

• 대한공업교육학회지
• /
• v.38 no.1
• /
• pp.163-194
• /
• 2013

This study aims at giving examples that can be applied in the real education field, and it develops theme-based integrative education program for Industrial Specialized high school students. It analyzed the models of many scholars about the development of education course, and devised developmental models and procedures of the theme-based integrative education program of engineering specialized high school from those. As a result, it used and reorganized ADDIE model which is the systematic education course development model and the theme-based integrative education development model of Frazee and Rudnitski(1995) as the basic structure, and came to devise theme-based integrative education program of engineering specialized high school while referring to creative engineering design education program development model by Lee Chang-hoon. This study that is theme-based integrative education program for engineering-specialized high school students and is the result of this study has the following characters. First, This theme-based integrative education program that is developed for engineering-specialized high school students can be applied and the initial example that approach the Theme-Based. Second, This Education Program included the Activity project that is "Making Maglev" for the third grade at the engineering-specialized high school and One of the Program's aim is to bring up their attitude that engaged to in the class having the Interest. Third, Theme-based integrative education program for engineering-specialized high school is composed the workbook for the students and the teaching guidance plan for the teachers. Workbook for the students is composed four Units;"Brief about the Maglev","Basic principles about the Maglev","Intensive principles about the Maglev", Activity project about the Maglev". And each unit is made by Learning Purpose, Introducing, Learning Contents(Deepen Learning, Reading Magazines), Assesment etc. Teaching guidance plan for the teachers include that Summary, Purpose, Time Planing & Streaming Map for the class, contents associated Maglev, prerequisite learning, constructure of the education program, flow chart, learning activity, assesment(self-appraiser and peer review).

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.4
• /
• pp.503-510
• /
• 2012

Microwave radar can penetrate cloud cover regardless of weather conditions and can be used day and night. Especially a A ground-based polarimetric scatterometer operating at multiple frequencies can continuously monitor the crop conditions. We analyzed scattering characteristics of rice and soybean using pauli decomposition method. Surface scattering (${\alpha}$) is the dominant component over the entire stages for all bands and pauli decomposition value was the highest for L-band. Double bounce scattering (${\beta}$) and volume scattering (${\gamma}$) were approximately equal for C-band and volume scattering was higher than double bounce scattering for X-band in rice field. In soybean, double bounce scattering becomes higher than volume scattering during the R2 stage (DOY 224) and there was a significant difference between the two components after the R4 stage (DOY 242) for L-band. The maximum growth stage of soybean can also be detected using L-band double bounce scattering. The peak of double bounce effect coincides with the peak of growth biophysical variables on DOY 271. We found that pauli decomposition can provide insight on the relative magnitude of different scattering mechanisms during the rice and soybean growth cycle.

• Korean Journal of Psychosomatic Medicine
• /
• v.7 no.1
• /
• pp.26-41
• /
• 1999

The perceived stress response inventory(PSRI) was developed to measure 4 types of current stress responses : emotional, somatic, cognitive, and behavioral responses. 242 patients with psychiatric disorders(71 patients with anxiety disorders, 73 patients with depressive disorders, 47 patients with somatoform disorders, 51 patients with psychosomatic disorders) and 215 healthy subjects completed the questionnaire including the PSRI. Global assessment of recent stress(GARS) scale, perceived stress questionnaire(PSQ) and symptom checklist-90-revised(SCL-90-R) were also administered at the same time. Factor analysis for each of 4 types of stress responses yielded 8 factors : negative emotional responses, general somatic symptoms, specific somatic symptoms, lowered cognitive function and general negative thinking, self-depreciative thinking, impulsive-aggressive thinking, passive-responsive and careless behavior, and impulsive-aggressive behavior. Both test-restest reliability(r= .83 -.93) and internal consistency(Cronbach's alpha : .79 -.96 for each of 8 subscales and .98 for total items of the scale) were all at statistically significant levels. Total scores of the PSRI significantly correlated with total scores of GARS scale, PSQ, and global indicies of SCL-90-R, respectively. The patient group had significantly higher scores than healthy subjects in each of all the subscales except impulsive-aggressive behavior subscale. These results suggest that the PSRI is a reliable and valid tool stable over time which may be effectively used for the research in stress-related field including psychosomatic medicine.

• The Korean Journal of Pesticide Science
• /
• v.11 no.4
• /
• pp.254-260
• /
• 2007

In order to evaluate the toxic effects of butachlor, a herbicide widely used for control of weeds in paddy field, on medaka (Oryzias latipes), acute toxicity tests for five developmental stages and early life stage toxicity test of were conducted. As the results of acute toxicity test, $96h-LC_{50}s$ for 1 day, 1 week, 2 weeks, 2 months and 5 months after hatching of O. latipes were 0.68, 0.52, 0.38, 1.09 and $0.45\;mg\;L^{-1}$, respectively. This indicated that the most sensitive stage was 2 weeks after hatching. The early life stage toxicity test showed that no statistically significant hatching period and hatching success of embryo was observed at all concentrations of butaclor. However, 0.05 and $0.1\;mg\;L^{-1}$ of butachlor showed statistically significant post hatching survival with p<0.1. Abnormalities of larva were 2.1, 2.3 and 10% at 0.025, 0.05 and $0.1\;mg\;L^{-1}$ of concentration, respectively. They showed abnormal vertebral axis, craniofacial alteration and retarded yolk-sac resorption. The total length and weight were decreased depending on butachlor concentration the end of test. Weight of larva was showed more sensitive toxic indicator than total length. The toxicological responses of O. latipes to butachlor expressed as LOEC(lowest observed effect concentration), NOEC(no observed effect concentration) and MATC(maximum acceptable toxicant concentration) values were 0.025, 0.013 and $0.018\;mg\;L^{-1}$, respectively.

• The Korean Journal of Pesticide Science
• /
• v.20 no.4
• /
• pp.380-387
• /
• 2016

This study was performed to select potentially available biological control agent from soil bacteria for prevention of ginseng damping off. More than five hundred strains were isolated from ginseng rhizosphere soil. By testing antifungal activity, we have selected three soil bacteria strains and their ability to produce antibiotics and lytic enzymes such as cellulase, protease and pectate lyase was examined. Also, the presence of genes for biosynthesis of lipopeptide such as fengycin, bacillomycin D, surfactin, iturin A, and zwittermicin A was investigated in selected strains. All three strains produced cellulase, protease, and xylanase. Moreover, these strains had gene for biosynthesis of bacillomycin D, surfactin, and iturin A. ES1 and ES3 strains were identified Bacillus methylotrophucus and ES2 was confirmed Bacillus amyloliquefaciens using phylogenetic analysis on the basis of 16S rRNA gene sequences. In field test, control value of ES1, ES2 and ES3 treatment was 32.4%, 46.8% and 36.7%, respectively. This results indicate that antagonistic microbes with high ability of antifungal and lytic enzyme activity can be used as a useful biological control agent to control ginseng damping off.

• Journal of Biosystems Engineering
• /
• v.7 no.2
• /
• pp.18-29
• /
• 1983

A low cost and versatile data acquisition system for the field and laboratory use was developed by using a single board microcomputer. Data acquisition system based on a Z80 microprocessor was built, tested and modified to obtain the present functional system. The microcomputer developed consists of 6 kB ROM, 5 kB RAM, 6-seven segment LED display, 16-Hex. key and 8 command key board. And it interfaces with an 8 channel, 12 bits A/D converter, a microprinter, EPROM programmer for 2716, and RS232C interface to transfer data between the system and HP3000 mini-computer manufactured by Hewlett Packard Co., A software package was also developed, tested, and modified for the system. This package included drivers for the AID converter, LED display, key board, microprinter, EPROM programmer, and RS232c interface. All of these programs were written in 280 assembler language and converted to machine codes using a cross assembler by HP3000 computer to the system during modifying stage by data transferring unit of this system, then the machine language wrote to the EPROM by this EPROM programmer. The results are summarized as follows: 1. Measuring program developed was able to control the measuring intervals, No. of channels used, and No. of data, where the maximum measuring speed was 58.8 microsec. 2. Calibration of the system was performed with triangle wave generated by a function generator. The results of calibration agreed well to the test results. 3. The measured data was able to be written into EPROM, then the EPROM data was compared with original data. It took only 75 sec. for the developed program to write the data of 2 kB the EPROM. 4. For the slow speed measurements, microprinter instead of EPROM programmer proved to be useful. It took about 15 min. for microprinter to write the data of 2 kB. 5. Modified data transferring unit was very effective in communicating between the system and HP3000 computer. The required time for data transferring was only 1~2 min. 6. By using DC/DC converting devices such as 78-series, 79-series. and TL497 IC, this system was modified to convert the only one input power sources to the various powers. The available power sources of the system was DC 7~25 V and 1.8 A.

• The Korean Journal of Pesticide Science
• /
• v.20 no.3
• /
• pp.271-279
• /
• 2016

To evaluate exposure characteristics of the insecticide imidacloprid to apple orchard workers during treatment on orchard fields and evaluate its potential risk using a whole body dosimetry (WBD) method, 1,000-time diluted acephate+imidacloprid 25(20+5)% solutions were sprayed on 10 apple orchard fields in Cheongju with a speed sprayer at a rate of 3,000 L/ha/person, after put on clothes such as inner/outer clothes, personal air pump with a IOM sampler, nitrile glove and mask. Exposure test included mixing, loading and application steps. The test pesticide imidacloprid residues in the collected samples were analyzed with a HPLC-DAD. Recoveries ranged from 81.5 to 108.6% for analytical method validation and from 73.8 to 86.7% for field recovery. Total exposed amounts to mixer/loader and applicator were found to be 0.0014-0.0279% of total applied active ingredient of imidacloprid. Glove exposure of both mixer/loader and applicator was higher than the other parts. Margins of safety of mixer/loader and applicator were calculated to be 97-355 and 46-196, respectively, indicating that exposure risk of imidacloprid to apple orchard workers by spraying with a speed sprayer was very low.