• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.8
• /
• pp.52-59
• /
• 2007

In this paper, we analyzed and measured implant isolation characteristics for a 1.25 Gbps monolithic integrated hi-directional (M-BiDi) optoelectronic system-on-a-chip, which is a key component to constitute gigabit passive optical networks (PONs) for a fiber-to-the-home (FTTH). Also, we derived an equivalent circuit of the implant structure under various DC bias conditions. The 1.25 Gbps M-BiDi transmit-receive SoC consists of a laser diode with a monitor photodiode as a transmitter and a digital photodiode as a digital data receiver on the same InP wafer According to IEEE 802.3ah and ITU-T G.983.3 standards, a receiver sensitivity of the digital receiver has to satisfy under -24 dBm @ BER=10-12. Therefore, the electrical crosstalk levels have to maintain less than -86 dB from DC to 3 GHz. From analysed and measured results of the implant structure, the M-BiDi SoC with the implant area of 20 mm width and more than 200 mm distance between the laser diode and monitor photodiode, and between the monitor photodiode and digital photodiode, satisfies the electrical crosstalk level. These implant characteristics can be used for the design and fabrication of an optoelectronic SoC design, and expended to a mixed-mode SoC field.

• Journal of Aquaculture
• /
• v.13 no.4
• /
• pp.277-284
• /
• 2000

Rabbitfish hatchlings were given a mixed food of rotifers (Brachionus rotundiformis) and trochophore larvae of oyster. Only the oyster-trochophore larvae were found in the gut of 62-h old fish larvae. The fish larvae, fed on rotifer and ciliate alone did not survive. However, their survival increased to 3.3 % on the 10th day after hatching, when trochophore was supplemented. Corresponding with the accelerated growth, the number of rotifers consumed increased from 11 in a 5-day old fish to 165 in a IS-day old fish. In a field ecosystem containing live diatom, Nannochloropsis oculata, rotifers and copepods, fish larvae were shocked and the oyster's trochophore larvae were fed from 2 to 7 days after hatching. A total of 76,000 seedling were produced after 50 days of hatching with 12.7 % survival. Mean total length and body weight were 65.6 mm and 3.4 g, respectively. Growth of body length (BL), body height (BH), body weight (BW) and head length (HL) as a function of the total length (TL) showed regressional relationships as follows; BL=0.8565 TL+0.0852 ($t^2$=0.9996); BH=0.3207 TL - 0.5052 (($t^2$=0.9641) BW=0.0652 TL2.3508 (($t^2$=0.9925); HL=0.2595 TL - 0.1898 (($t^2$=0.9901)

• Progress in Medical Physics
• /
• v.26 no.4
• /
• pp.250-257
• /
• 2015

Multi-leaf collimator (MLC) systems are frequently used to deliver photon-based radiation, and allow conformal shaping of treatment beams. Many proton beam centers currently make use of aperture and snout systems, which involve use of a snout to shape and focus the proton beam, a brass aperture to modify field shape, and an acrylic compensator to modulate depth. However, it needs a lot of time and cost of preparing treatment, therefore, we developed the manual MLC for solving this problem. This study was carried out with the intent of designing an MLC system as an alternative to an aperture block system. Radio-activation and dose due to primary proton beam leakage and the presence of secondary neutrons were taken into account during these iterations. Analytical calculations were used to study the effects of leaf material on activation. We have fabricated tray model for adoption with a wobbling snout ($30{\times}40cm^2$) system which used uniform scanning beam. We designed the manual MLC and tray and can reduce the cost and time for treatment. After leakage test of new tray, we upgrade the tray with brass and made the safety tool. First, we have tested the radio-activation with usually brass and new brass for new manual MLC. It shows similar behavior and decay trend. In addition, we have measured the leakage test of a gantry with new tray and MLC tray, while we exposed the high energy with full modulation process on film dosimetry. The radiation leakage is less than 1%. From these results, we have developed the design of the tray and upgrade for safety. Through the radio-activation behavior, we figure out the proton beam leakage level of safety, where there detects the secondary particle, including neutron. After developing new design of the tray, it will be able to reduce the time and cost of proton treatment. Finally, we have applied in clinic test with original brass aperture and manual MLC and calculated the gamma index, 99.74% between them.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.7 no.3
• /
• pp.181-190
• /
• 2012

After industrialization, the labor force participation rates of women, especially married women is drastically increasing. So, this study was designed to analyze the determinants of married women's employment status considered. For this, the determinants of married women's employment status were divided into individual-related, children-related, household-related and job-related variables to establish the research models. Based on this, the following results were drawn from a multinominal logistic regression analysis of the determinants of married women's employment status. First, an analysis of individual-related variable showed that married women had the employment status of labor wages with residence in the center of the city and high academic background. Second, an analysis of children-related variable showed that they had the employment status of labor wages with many their children and no their children under the age of six. Third, an analysis of household-related variable showed that they had the self-employment status of labor wages with nuclear family and few income earners of family members. Finally, an analysis of job-related variable showed that they had the employment status of labor wages when they got a job before they got married, their husband didn't get a job, and their husband worked in a professional field. As for findings stated above, as there was a difference in the determinants of married women's employment status, the ways for improvement in the married women's employment status would be suggested as follows. First, married women with young children have the low employment status, basically, requiring problem-solving ways for this because the housekeeping and child-rearing burden caused by marriage and childbirth are factors that continue to obstruct a job. For this, the flexible working hours system, which housekeeping and child-rearing can harmonize with economic activities like developed countries, needs to be activated. But the activation of such flexible working system will produce actual results under institutional protection, such as a related-protection law. Second, the Leave of Child Care System is debated as one of the most representatively systems that housekeeping can harmonize with economic activities. Now, although the System is legislated, the use is very poor.

• Journal of the Korean Society of Radiology
• /
• v.14 no.3
• /
• pp.279-287
• /
• 2020

Recently, interest in radiation protection is increasing because of the occurrence of accidents related to exposure dose. So, the nuclear safety act provides to install the shields to avoid exceeding the dose limit. In particular, when the worker conducts the non-destructive testing (NDT) without the fixed shielding structure, we should monitor the access to the workplace based on a constant dose rate. However, when we apply for permits for NDT work in these work environments, the consideration factors to the estimation of the distance and exposure dose are not legally specified. Therefore, we developed the excel model that automatically calculates the distance, exposure dose, and cost if we input the factors. We applied the assumption data to this model. As a result of the application, the distance change rate was low when the thickness of the lead blanket and collimator is above 25 mm, 21.5 mm, respectively. However, we didn't consider the scattering and build-up factor. And, we assumed the shape of the lead blanket and collimator. Therefore, if we make up for these limitations and use the actual data, we expect that we can build a database on the distance and exposure dose.

• Investigative Magnetic Resonance Imaging
• /
• v.10 no.1
• /
• pp.1-7
• /
• 2006

Purpose : Recent development of diffusion tensor imaging enables the evaluation of the microstructural characteristics of the brain white matter. However, optimal imaging parameters for diffusion tensor imaging, particularly concerning the number of diffusion gradient direction, have not been studied thoroughly yet. The purpose of this study was to evaluate the influence of the number of diffusion gradient direction on the fiber tracking of the white matter. Materials and methods : 13 healthy volunteers (ten men and three women, mean age 30 years, age range 23-37 years) were included in this study. Diffusion tensor imaging was performed with different numbers of diffusion gradient direction as 6, 15, and 32, keeping the other imaging parameters constant. The imaging field ranged from 1 cm below the pons to 2-3 cm above the lateral ventricle, parallel to the anterior commissure-posterior commissure line. FA (fractional anisotropy) maps were created via image postprocessing, and then FA and its standard deviation were calculated in the genu and the splenium of the corpus callosum on each of FA maps. Fiber tracking of the corticospinal tract in the brain was performed and the number of the reconstructed fibers of the tract was measured. FA, standard deviation of FA and the number of the reconstructed fibers were compared statistically between the different diffusion gradient directions. Results : FA is not statistically significantly different between the different diffusion gradient directions. By increasing the number of diffusion gradient direction, standard deviation of FA decreased significantly, and the number of the reconstructed fibers increased significantly. Conclusion : The higher number of diffusion gradient direction provided better quality of fiber tracking.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.5
• /
• pp.338-343
• /
• 2004

Purpose: The purpose of this study was to develop a small animal PET using dual layer phoswich detector to minimize parallax error that degrades spatial resolution at the outer part of field-of-view (FOV). Materials and Methods: A simulation tool GATE (Geant4 Application for Tomographic Emission) was used to derive optimal parameters of small PET, and PET was developed employing the parameters. Lutetium Oxyorthosilicate (LSO) and Lutetium-Yttrium Aluminate-Perovskite(LuYAP) was used to construct dual layer phoswitch crystal. $8{\times}8$ arrays of LSO and LuYAP pixels, $2mm{\times}2mm{\times}8mm$ in size, were coupled to a 64-channel position sensitive photomultiplier tube. The system consisted of 16 detector modules arranged to one ring configuration (ring inner diameter 10 cm, FOV of 8 cm). The data from phoswich detector modules were fed into an ADC board in the data acquisition and preprocessing PC via sockets, decoder block, FPGA board, and bus board. These were linked to the master PC that stored the events data on hard disk. Results: In a preliminary test of the system, reconstructed images were obtained by using a pair of detectors and sensitivity and spatial resolution were measured. Spatial resolution was 2.3 mm FWHM and sensitivity was 10.9 $cps/{\mu}Ci$ at the center of FOV. Conclusion: The radioactivity distribution patterns were accurately represented in sinograms and images obtained by PET with a pair of detectors. These preliminary results indicate that it is promising to develop a high performance small animal PET.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.3
• /
• pp.1-8
• /
• 2020

EuiJae Hu BaekRyun is a symbol of Honam Namjonghwa and is respected as a teacher of Honam culture. He is from JinDo and is a relative of Sochi Heo Ryun and a disciple of Misan Heo Hyeong. The spirit of traditional Namjongghwa and the dignity of painting faithful to its technique have been obtained by themselves, and have made it his own. EuiJae organized a 'Yeonjinhoe' in Gwangju to raise his students. After liberation, a house was built under Mudeungsan Mountain. And showed another aspect as a social educator who emphasized and practiced national spirit while being a tea ceremony man. He excelled in Chinese poetry and painting theory, and expressed a unique field in calligraphy. especially worked as an artist good at poetry, caligraphy, and painting. EuiJae showed exceptional talent, especially in landscape painting. His tendency to paint was to follow Ye Chan's technique of drawing with a dry brush, placing importance on the energy of learning, and constantly trying new experiments with the technique of gisaeng. The world of EuiJae's works can be divided into three periods, based on the signature using the trend of painting or the change of perspective pursued, the era of EuiJae, the era of EuiJaeSanin, and the era of EuiDoin, which had a tendency of independent painting. EuiJae's contribution surpassed the artistic historical assessment that he had formed a big stem for the authentic Namjongghwa of Korean painting culture, which was part of Oriental painting. And recognizing that he was a fundamental teacher connecting modern times through the actual scenery based on NamDohwa's universal spirit and regional characteristics and the creative succession of emotions, he should inherit his passion for artistic spirit and tradition and experimental spirit.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.3
• /
• pp.186-195
• /
• 2018

A field study was conducted over a 3-year period from 2014 to 2016 in the central plain area, Suwon, Korea, 1) to compare the biomass production between machine-transplanted and water-broadcast seeded silage rice and 2) to elucidate the growth factors that affect the difference in biomass production between the two cultivation practices. The heading date for the water-broadcast seeded silage rice was September 11-18, which was delayed by 11-17 days when compared to that for the machine-transplanted silage rice. On average, water-broadcast seeded silage rice had a shorter plant height, more panicles per area, and a greater biomass production because of the increased straw dry weight. However, the difference in dry weight of each plant organ between the two cultivation practices exhibited yearly variation. When the data were pooled across experimental years, cultivation practices, and varieties, biomass production was highly positively correlated with straw dry weight but not with panicle dry weight. When the ratio of water-broadcast seeding to machine-transplanting was analyzed, total dry weight and straw dry weight were positively associated with each other, whereas no relationship was found between total dry weight and panicle dry weight. Despite that water-broadcast seeded silage rice produced more panicles per area than machine-transplanted silage rice, the two cultivation practices had a similar dry weight per culm. Therefore, we conclude that the silage rice from the water-broadcast seeding, compared to the machine-transplanting, produced more biomass because of the combination of the increased panicle number per area and a similar dry weight per culm. These results suggest that silage rice could be produced through water-broadcast seeding to increase biomass production with low labor and cost input.

• Journal of Dairy Science and Biotechnology
• /
• v.33 no.1
• /
• pp.35-46
• /
• 2015

Recently, much attention has been paid to the development of a value-added food category containing probiotics so as to improve human health and prevent diseases. Among various foods, the health benefits of milk and dairy products are known to humanity, and could be attributed to the bioactive components present in milk. In fermented milk products, the health benefits could be due to suitable modulation activities produced by the action of probiotic bacteria. Besides the modification of various milk components, probiotics might also act directly as preventive and therapeutic agents against some severe diseases. Probiotics promote health via their positive effects on the immune response, stimulation of natural immunity, and modulation of the production of antimicrobial peptides, cytokines, and so on. Whey proteins, a byproduct of cheese production could also have anticarcinogenic, immunostimulatory, antimicrobial, and health-promoting activities such as improving insulin sensitivity and reducing fat deposition. Therefore, milk and dairy products containing probiotics could provide various opportunities in the field of functional foods. Additionally, these functional foods may be important in the human diet and may help improve human health and prevent diseases.