• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.778-781
• /
• 2007

The dispersion of carbon nanotubes in composite and their field emission superiority have been discussed. Four synthesis methods have been studied. The CNT-composite, synthesized by the combination of the chemical and mechanical dispersion routes shows superior dispersion as well as field emission characteristics as compared to other syntheses methods.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.103-106
• /
• 1999

In this paper, we suggest the FED packaging technology that have 4mm thickness, using sodalime glass-to-sodalime glass electrostatic bonding. It based on conventional silicon-glass bonding. The silicon film was deposited an around the exhausting hole on FED backside panel. And then, the silicon film of panel was successfully bonded with capping(bare) glass in vacuum environment and the FED panel was vacuum-sealed. In this method, we could achieve more 153 times increased conductance and 200 times increased vacuum efficiency than conventional tube packaging method. The vacuum level in panel, by SRG test, was maintained about low 10$_{-4}$ Torr during above two months And, the light emission was observed to 0.7-inch tubeless packaged FED. Then anode current was 34 $\mu$ A. Emission stability was constantly measured for 10 days.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1233-1234
• /
• 2006

A simple new method to fabricate transparent carbon nanotube field emission devices was developed. The highly graphitized single wall carbon nanotubes were attached on Sn/ITO glass by arc discharge method. Post heat treatments below the deformation temperature of soda-lime glass guaranteed a good mechanical adhesion and electrical contact of the nanotubes. The Sn layer was oxidized below $400^{\circ}C$ and became transparent. As increasing the oxidation temperatures, the emission properties became stable and life time of emitter has been increased.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.859-862
• /
• 2003

Well-aligned multiwall carbon nanotubes (MWCNTs) were prepared at low temperature of 400 $^{\circ}C$ by utilizing a radio frequency plasma-enhanced chemical vapor deposition (rf-PECVD) system. The MWCNTs were treated by an external rf plasma source and an ultra-violet laser in order to modify structural defect of carbon nanotube and to ablate possible contamination on carbon nanotube surface. Structural properties of carbon nanotubes were investigated by using a scanning electron microscopy (SEM), Raman spectroscopy, Fourier transformer Infrared spectroscopy (FTIR) and transmission electron microscope (TEM). In addition, the emission properties of the MWNTs were measured for the application of field emission display (FED) in near future. Various post treatments were found to improve the field emission property of carbon nanotubes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.131-132
• /
• 2000

We prepared Si emitters coated with a MOCVD $CoSi_2$ layer to improve the emission properties. The $CoSi_2$ layer was grown on Si field emitters in situ by reactive chemical-vapor deposition of cyclopentadienyl dicarbonyl cobalt at 600 ${\sim}$ $650^{\circ}C$. The $CoSi_2$ coated field emitters showed enhanced emission properties of current-voltage characteristics, which were due to the increase of emitting area from Fowler-Nordheim plot. And the emission current fluctuation decreased due to the chemically stable surface properties of $CoSi_2$.

• 한국진공학회지
• /
• 제14권4호
• /
• pp.258-262
• /
• 2005

본 연구는 실리콘 질화막 박막을 덮개층으로 사용하여 탄소나노튜브를 성장하고, 성장된 나노튜브의 전자방출특성을 조사하였다. 탄소 나노튜브는 triode PE-CVD 장치에 의해 성장되었으며, 탄소나노튜브의 밀도는 실리콘 질화막의 두께에 따라 크게 변하였다. 탄소 나노튜브의 밀도가 $10^{4}$/$cm^{2}$에서 전자방출 특성이 가장 우수하였으며, 이때 전자방출특성은 문턱전계 1.2 V/$\mu$m, 전류밀도는 3.6 V/$\mu$n의 전기장에서 0.17 mA/$cm^{2}$으로 측정 되었다. 또한, 진공 챔버에서 질소($N_{2}$) 분위기 하에서 전자방출 안정성을 조사하였으며, 탄소나노튜브의 밀도가 감소함에 따라 전자방출 안정성이 향상되었고, 탄소나노튜브의 밀도가 $10^{4}$/$cm^{2}$ 인 경우 $1\times10^{-4}$ A/$cm^{2}$ 이상의 전류가 흐르는 특성을 보였으며, 이 경우 $1\times$$10^{-5}$ Torr의 압력하에서 방출 전류의 안정도는 최소인 $2\%$를 유지하였다.

• 반도체디스플레이기술학회지
• /
• 제20권3호
• /
• pp.11-17
• /
• 2021

I performed a semi-analytical numerical analysis of the effects of core size and electric field intensity on the light emission wavelength of CdSe/ZnS quantum dots (QDs). The analysis used a quantum mechanical approach; I solved the Schrödinger equation describing the electron-hole pairs of QDs. The numerical solutions are described using a basis set composed of the eigenstates of the Schrödinger equation; they are thus equivalent to analytical solutions. This semi-analytical numerical method made it simple and reliable to evaluate the dependency of QD characteristics on the QD core size and electric field intensity. As the QD core diameter changed from 9.9 to 2.5 nm, the light emission wavelength of CdSe core-only QDs varied from 262.9 to 643.8 nm, and that of CdSe/ZnS core/shell QDs from 279.9 to 697.2 nm. On application of an electric field of 8 × 10⁵ V/cm, the emission wavelengths of green-emitting CdSe and CdSe/ZnS QDs increased by 7.7 and 3.8 nm, respectively. This semi-analytical numerical analysis will aid the choice of QD size and material, and promote the development of improved QD light-emitting devices.

• 인포메이션 디스플레이
• /
• 제21권5호
• /
• pp.26-33
• /
• 2020

• 한국진공학회지
• /
• 제9권2호
• /
• pp.110-115
• /
• 2000

열-필라멘트 CVD 장치를 이용하여 다이아몬드 박막의 증착 조건을 최적화시켰다. $B_4C $ 고체 펠렛을 사용하여 보론두핑된 다이아몬드 박막을 제조하여 그 질적 특성을 알아보고, 전류전압 특성과 전계 방출 측정을 통해 박막의 전계방출소자(field emission display (FED)로의 특성을 조사하였다. 보론 도핑의 양이 증가함에 따라 다이아몬드 결정의 평균 입자 크기가 조금씩 감소하지만 다이아몬드의 질은 소량 도핑인 경우에 크게 바뀌지 않았다. Al/Diamond/p-Si 소자의 전류전압 특성을 조사한 결과 도핑된 다이아몬드 박막의 전류는 도핑되지 않은 박막의 전류에 비해 $10^4$~$10^5$배 정도 증가하였다. 전계방출 특성을 조사한 결과 보론-도핑이 증가함에 따라 점차 낮은 전기장에서 전자를 방출하며, 또한 높은 방출 전류를 나타냈다. 전자가 방출되기 시작하는 onset-field는 펠렛의 수가 2개일 때 15.5 V/$\mu\textrm{m}$, 3개일 때 13.6 V/$\mu\textrm{m}$, 4개일 때는 11.1 V/$\mu\textrm{m}$. 체계적으로 감소하였다. 도핑의 강도가 세어짐에 따라 Fowler-Nordheim 그래프의 기울기는 감소하는 경향을 보였으며, 이로서 보론 도핑으로 인해 유효 장벽 에너지가 감소되어 전자 방출 특성이 향상됨을 알 수 있었다.

• Journal of Information Display
• /
• 제2권3호
• /
• pp.48-53
• /
• 2001

Carbon nanotube emitters, prepared by screen printing, have demonstrated a great potential towards low-cost, largearea field emission displays. Carbon nanotube paste, essential to the screen printing technology, was formulated to exhibit low threshold electric fields as well as an emission uniformity over a large area. Two different types of triode structures, normal gate and undergate, have been investigated, leading us to the optimal structure designing. These carbon nanotube FEDs demonstrated color separation and high brightness over 300 $cd/m^2$ at a video-speed operation of moving images. Our recent developments are discussed in details.