• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.31.1-31.1
• /
• 2009

Carbon nanotubes (CNTs) are attractive material because of their superior electrical, mechanical, and chemical properties. Furthermore, their geometric features such as a large aspect ratio and a small radius of curvature at tip make them ideal for low-voltage field emission devices including backlight units of liquid crystal display, lighting lamps, X-ray source, microwave amplifiers, electron microscopes, etc. In field emission devices for display applications, the phosphor anode is positioned against the CNT emitters. In most case, light generated from the phosphor by electron bombardment passes through the anode front plate to reach observers. However, light is produced in a narrow depth of the surface of the phosphor layer because phosphor particles are big as much as several micrometers, which means that it is necessary to transmit through the phosphor layer. Hence, a drop of light intensity is unavoidable during this process. In this study, we fabricated a transparent cathode back plate by depositing an ultra-thin film of single walled CNTs (SWCNTs) on an indium tin oxide (ITO)-coated glass substrate. Two types of phosphor anode plates were employed to our transparent cathode back plate: One is an ITO glass substrate with a phosphor layer and the other is a Cr-coated glass substrate with phosphor layer. For the former case, light was radiated from both the front and the back sides, where luminance on the back was ~30% higher than that on the front in our experiments. For the other case, however, light was emitted only from the cathode back side as the Cr layer on the anode glass rolled as a reflecting mirror, improving the light luminance as much as ~60% compared with that on the front of one. This study seems to be discussed about the morphologies and field emission characteristics of CNT emitters according to the experimental parameters in fabricating the lamps emitting light on the both sides or only on the cathode back side. The experimental procedures are as follows. First, a CNT aqueous solution was prepared by ultrasonically dispersing purified SWCNTs in deionized water with sodium dodecyl sulfate (SDS). A milliliter or even several tens of micro-liters of CNT solution was deposited onto a porous alumina membrane through vacuum filtration. Thereafter, the alumina membrane was solvated with the 3 M NaOH solution and the floating CNT film was easily transferred to an ITO glass substrate. It is required for CNT film to make standing CNTs up to serve as electron emitter through an adhesive roller activation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.211-211
• /
• 2000

Carbon nanotubes (CNTs) have been spotlighted as one of promising field emission displays(FEDs). For the first time, to authors knowledge, we have developed the 9" color CNT-FEDs with the resolution of 240x576 lines. The 9" CNT-FEDs with diode-type and triode-type structures are presented. The well-dispersed CNT paste was squeezed onto the metal-patterned cathode glass. For the anode plate, the Y2O2S:Eu, ZnS:Ag,Cl low-voltage phosphors were printed for red, green, and blue colors, respectively. The vacuum-packaged panel maintained the vacuum level of 1x10-7 Torr. The uniform moving images vacuum-packaged panel maintained the vacuum level of 1x10-7 Torr. The uniform moving images were demonstrated at 2 V/um. High brightness of 800, 200, and 150cd/m2 was observed on the green, red, and blue phosphors at V/um, respectively. Field emission characteristics of a triode-type CNT-FED were simulated using a finite element method. the resultant field strength on the cathode was modulated by gate bias and emitted electrons were focused on the anode. A relatively uniform emission image was experimentally achieved at the 800V anode. A relatively uniform emission image was experimentally achieved at the 800V anode and the 50-180 V gate biases. Energy distribution of electrons emitted from CNTs was measured using an energy analyzer. The maximum peak of energy curve corresponded to the Fermi energy level of CNTs. The whole fabrication processed of CNT-FEDs were fully scalable and reproducible. Our CNT-FEDs has demonstrated the high potential of large-area and full-color applications with very low cost fabrication and low power consumption.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.919-922
• /
• 2004

The Field Emission Display is potentially an excellent display with high brightness and low power consumption with wide viewing angle but more work is still needed in order to identify the ideal electron emitter for such displays. This paper will review the work that we have carried out in Cambridge aver the past couple of years on optimisation of Carbon nanotubes for use as the cold cathode emitters that are possible candidates as the electron sources in second generation FEDs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.483-485
• /
• 2007

The active-matrix field emission display (AMFED) was fabricated by integrating carbon nanotube emitters on a-Si thin-film transistors. Also, the tapered macro-gate was adopted for high immunity to a high anode voltage and strong electron beam focusing. The fabricated AMFED was successfully driven with a low voltage of below 15 V.

• Journal of the Korean Vacuum Society
• /
• v.8 no.4A
• /
• pp.410-416
• /
• 1999

It is confirmed that the cause of anode current in SEDs (surface conduction electron emission displays) is the inertial force of electron emitted from the cathode surface in the calculation of electron trajectory. In the fissure of sub-micron, most of electrons emitted from the area of the cathode edge flow into the coplanar anode, while some electrons are emitted into the display surface by the current ratio of $10^{-3}$. The later electrons are forced to fly into the display surface by the centrifugal force due to the curved electric field between top side surfaces near the fissure.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.1
• /
• pp.28-31
• /
• 2013

A volcano shaped gated Si-FEA (silicon field emitter array) was simply fabricated using sputtering as a gate electrode deposition and lift-off for the removal of the oxide mask, respectively. Due to the limited step coverage of well-controlled sputtering and the high aspect ratio in Si dry etch caused by high RF power, it was possible to obtain Si FEAs with a stable volcano shaped gate structure and to realize the restriction of gate leakage current in field emission characteristics. For 100 tip arrays and 625 tip arrays, gate leakage currents were restricted to less than 1% of the anode current in spite of the volcano-shaped gate structure. It was also possible to keep the emitters stable without any failure between the Si cathode and gate electrode in field emission for a long time.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.1
• /
• pp.75-80
• /
• 2006

We have fabricated a carbon nanotube field emission display(CNT-FED) panel with a 2 inch diagonal size using a screen printing method and in-situ vacuum sealing technology. The field emission properties of CNT FED panel with square-type CNT emitters. As results, the square-characterized and compared with those of the line-type CNT emitters. As results, the square-type CNT emitters showed much larger emission current and more stable I-V characteristics. Light emission started to be occurred at an electric field of 3.5 V/${\mu}m$ corresponding to the anode-cathode voltage of 700 V. The vacuum level inside of the in-situ vacuum sealed panel was obtained with $1.4 {\times} 10^{-5}$ torr. The sealed panel showed the similar I-V characteristics with the unsealed one and the uniform light emission with very high brightness at a current density of $243 {\mu}A/ cm^2$ obtained by the electric field of 10 V/${\mu}m$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05a
• /
• pp.185-188
• /
• 2004

A diode structure of field emission lamps based upon carbon-nanotube is studied. The single-walled carbon nanotubes(SWNTs) were produced by arc discharge method. We made the 1-inch diode type flat lamp using CNTs. We applied anode voltage gradually to refine the field emission behavior of emitter in dynamic vacuum system to study the emission current. the brightness and efficiency, etc. The field emission properties was estimated by varying gaps between the cathode and anode, contents of the glass frit. The good luminous efficiency is showed in the gap $900{\mu}m$, $1200{\mu}m$ and contents of the proper glass frit. For the upper conditions, the luminous efficiencies were respectively 23.30, 11.12 1m/W.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.04a
• /
• pp.84-87
• /
• 2003

Carbon-nitrogen (CN) nanofibers have been produced using a water cooled hot isostatic pressure (HIP) apparatus. The CN nanofibers were grown in random with the diameter of about 100-150nm and length over $10{\mu}m$. Emission properties of CN nanofibers were investigated for spacing, between anode and cathode, variation. Then turn-on fields about $1.4V/{\mu}m$. The time reliability and light emission test were carried out for above 100 hours. We suggest that CN nanofibers can be possibly applied to high brightness flat lamp because of low turn-on field and time reliability.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.691-692
• /
• 2009

Screen printable CNT pastes were formulated including conductive nano particles (CNPs) and their properties were investigated with an expectation of stable cold cathodes for advanced lamp application. CNT cathodes showed a turn-on field of 1~1.5V/um, a life time of ~100 hours at an emission current density of 10uA/$cm^2$ for DC-bias. Detailed analysis of measured I-V was carried out by applying Fowler-Nordheim model to trace down the origin of emission property degradation.