• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.505-510
• /
• 2003

The interests about railway safety have been highly increased. Early railway safety was widely studied in Europe and Japan, and safety standards were established in 1990s. EN 50126 of CENELEC, Railway applications - Specification and demonstration of RAMS, became IEC 62278 in 2002. This standard provides Railway Authorities and railway support industry with a process which will enable the implementation of a consistent approach to the management of RAMS. IEC 62278 will be often referred to in the field of railway system. This paper examined the application of railway RAMS on basis of IEC 62278.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.447-454
• /
• 1999

In this paper, a technique for the shape design and analysis of rail fastener is presented. KRRI's own 3 type fasteners are developed after due consideration for tile aspects of installation, maintenance, and cost of fastener. Numerical by using commercial FEM program COSMOS/Works are carried out to determine the optimal shape of fastener clip. Front tile manufactured models and numerical results, the developed fasteners show tile possibility to be commercialized. But in order to have their competitiveness on the markets, further studies are required for the demonstration of performance through laboratory and field tests

• 드라이브 ㆍ 컨트롤
• /
• 제19권1호
• /
• pp.81-85
• /
• 2022

• 에너지공학
• /
• 제24권1호
• /
• pp.51-57
• /
• 2015

본 연구에서는 바이오가스의 공급이 부족한 환경에서 5MW급 바이오 가스터빈을 운전하기 위한 바이오가스와 도시가스의 혼합용 혼합챔버의 성능에 대한 수치해석 및 실증 시험을 수행한 것이다. 혼합챔버의 성능에 대한 수치해석으로 혼합챔버 출구부분에서의 불균일도와 압력강하를 계산하였다. 그 결과, 불균일도는 최소 0.05%에서 최대 0.16%로 이는 99%이상 바이오가스와 도시가스가 혼합되는 것을 의미한다. 압력강하는 입구압력 5bar대비 최소 0.07%에서 0.17%로 0.2%미만으로 나타났다. 이를 통해 현장에서 실증 시험을 수행한 결과 외기온도 $15^{\circ}C$조건에서 바이오가스를 $20.0Nm^3/min$, 도시가스를 $12.0Nm^3/min$ 공급할 경우 5MW급 바이오 가스터빈의 정상적인 운전이 가능함을 확인하였다.

• 상하수도학회지
• /
• 제35권1호
• /
• pp.1-14
• /
• 2021

Eutrophication and algal blooms can lead to increase of taste and odor compounds and health problems by cyanobacterial toxins. To cope with these eco-social issues, Ministry of Environment in Korea has been reinforcing the effluent standards of wastewater treatment facilities. As a result, various advanced phosphorus removal processes have been adopted in each wastewater treatment plant nation-widely. However, a lot of existing advanced wastewater treatment processes have been facing the problems of expensive cost in operation and excessive sludge production caused by high dosage of coagulant. In this study, the sedimentation and dissolved air flotation (SeDAF) process integrated with sedimentation and flotation has been developed for enhanced phosphorus removal in wastewater treatment facilities. Design and operating parameters of the SeDAF process with the capacity of 100 ㎥/d were determined, and a demonstration plant has been installed and operated at I wastewater treatment facility (located in Gyeonggi-do) for the verification of field applicability. Several empirical evaluations for the SeDAF process were performed at demonstration-plant scale, and the results showed clearly that T-P and turbidity values of treated water were to satisfy the highest effluent standards below 0.2 mg/L and 2.0 NTU stably for all of operation cases.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.78-78
• /
• 2015

Metamaterials, artificially structured nanomaterials, have enabled unprecedented phenomena such as invisibility cloaking and negative refraction. Especially, hyperbolic metamaterials also known as indefinite metamaterials have unique dispersion relation where the principal components of its permittivity tensors are not all with the same signs and magnitudes. Such extraordinary dispersion relation results in hyperbolic dispersion relations which lead to a number of interesting phenomena, such as super-resolution effect which transfers evanescent waves to propagating waves at its interface with normal materials and, the propagation of electromagnetic waves with very large wavevectors comparing they are evanescent waves and thus decay quickly in natural materials. In this abstract, I will focus discussing our efforts in achieving the unique optical property overcoming diffraction limit to achieve several extraordinary metamaterials and metadevices demonstration. First, I will present super-resolution imaging device called "hyperlens", which is the first experimental demonstration of near- to far-field imaging at visible light with resolution beyond the diffraction limit in two lateral dimensions. Second, I will show another unique application of metamaterials for miniaturizing optical cavity, a key component to make lasers, into the nanoscale for the first time. It shows the cavity array which successfully captured light in 20nm dimension and show very high figure of merit experimentally. Last, I will discuss the future direction of the hyperbolic metamaterial and outlook for the practical applications. I believe our efforts in sub-wavelength metamaterials having such extraordinary optical properties will lead to further advanced nanophotonics and nanooptics research.

• 한국유기농업학회지
• /
• 제26권2호
• /
• pp.173-180
• /
• 2018

This study was conducted to investigate farmers' satisfaction in organic farming technologies developed by the Rural Development Administration (RDA). The survey targeted farmers who were eco-friendly or interested in eco-friendly agriculture. 70% of the target farmers were doing eco-friendly farming, and the satisfaction rate of the technology developed by the RDA was 3.85 points. The satisfaction of the farmers who participated in demonstration and demonstration of the farming field of the developed technology was 4.00 and the satisfaction level of organic farming instruction manual was 3.95. In addition, 38.4% of the surveyed areas were found to be pest control areas, and the impacts on the satisfaction of the organic cultivation related technology utilization and the satisfaction of the organic cultivation guide were analyzed. As a result, the RDA needs to develop and supply customized technology for aged small farmers.

• 한국태양에너지학회 논문집
• /
• 제36권2호
• /
• pp.53-63
• /
• 2016

Building Integrated Photovoltaic (BIPV) is one of the best ways to generate electric power using the solar energy, which is clean and inexhaustible energy resources. The most of BIPV modules have the form of GtoG (Glass to Glass) photovoltaic in building applications. Degradation leading to failure in photovoltaic modules is very important factor in BIPV modules. This paper analyzed the performance of various BIPV modules through outdoor exposure tests. Performance of three BIPV modules(c-Si type, a-Si type and DSSC type) with three installation angles influenced by sun light, outdoor temperature, and wind velocity was monitored and analyzed. As a result, c-Si type BIPV module outperforms other BIPV modules(a-Si type). In terms of power efficiency of the module, the installed angle of $45^{\circ}$ is better than others(90 degree, 0 degree). In addition, more realistic data of various BIPV system performance could be available through the field test and integrated building test. In this study, relationship of the BIPV system is identified module's installation angle, power generation, architectural performance, etc.

• Journal of Mechanical Science and Technology
• /
• 제19권10호
• /
• pp.1864-1874
• /
• 2005

This paper describes a wearable multi-modal user interface design and its implementation for a teleoperated field robot system. Recently some teleoperated field robots are employed for hazard environment applications (e.g. rescue, explosive ordnance disposal, security). To complete these missions in outdoor environment, the robot system must have appropriate functions, accuracy and reliability. However, the more functions it has, the more difficulties occur in operation of the functions. To cope up with this problem, an effective user interface should be developed. Furthermore, the user interface is needed to be wearable for portability and prompt action. This research starts at the question: how to teleoperate the complicated slave robot easily. The main challenge is to make a simple and intuitive user interface with a wearable shape and size. This research provides multi-modalities such as visual, auditory and haptic sense. It enables an operator to control every functions of a field robot more intuitively. As a result, an EOD (explosive ordnance disposal) demonstration is conducted to verify the validity of the proposed wearable multi-modal user interface.

• 자원ㆍ환경경제연구
• /
• 제12권4호
• /
• pp.611-635
• /
• 2003

본 연구는 R&DDD(Research & Development, Demonstration, Dissemination: $R&D^3$)로 구성되는 연구개발과정의 마지막 단계인 확산단계에 관한 내용을 다루고 있다. 확산단계(Dissemination Stage)에서는 개발된 기술과 다른 대안들과의 비교 평가가 이루어지고 최종적으로 가장 바람직한 방안이 선정되게 된다. 이 단계에서 이루어지는 기술대안에 대한 평가는 단순한 과정이 아니고, 기술적 특성뿐만 아니라 경제적 효과 등 여러 가지 요소들이 고려되어야 하는 복합적인 평가과정을 거치게 된다. 이는 오늘날 산업계 각 분야에서 바람직한 기술대안의 평가, 선정, 적용이 기업의 경쟁우위에 지대한 영향을 미치며 나아가 기업의 생존 및 성장을 좌우하기 때문이다. 본 연구에서는 열공급시스템의 기술적 대안에 대한 AHP방법을 고찰하고, 이 방법의 실무적 적용가능성을 검토하기 위해 에너지기술분야에서 폐열 활용시스템 대안들에 대한 평가에 적용한 결과를 보여주고 있다.