• The Journal of Engineering Geology
• /
• v.27 no.1
• /
• pp.21-29
• /
• 2017

Variations in matric suction were compared between field measurements and numerical analysis for a tailings dump slope. We performed an analysis of slope stability using precipitation records measured in the field, selecting the period (72 hours) of highest rainfall intensity during the field monitoring, for which the matric suction and rainfall records measured in the field were analyzed. In addition, we applied the precipitation records of this period to the numerical analysis. SEEP/W and SLOPE/W were used to analyze the seepage flow in the slope due to rainfall and to investigate the slope stability considering the wetting front depth from the ground surface, respectively. The seepage analysis, using SEEP/W, was carried out on the rainfall data obtained in the field. Comparisons between the field monitoring data and simulation results for matric suction show some quantitative difference but similar patterns of temporal variation. According to the results of slope stability analysis using SLOPE/W and the results of seepage analysis, the safety factor of the slope showed a sudden increase at the point of rapid increase in rainfall intensity. It then recovered because subsequent rainfall was scarce. Therefore, the stability of the tailings dump slope can be reasonably estimated if seepage and slope stability analyses, based on precipitation records, have been carried out.

• Journal of Power Electronics
• /
• v.6 no.2
• /
• pp.163-171
• /
• 2006

In this paper, a Switched Reluctance Motor (SRM) employed in an electric vehicle (EV) is designed using the finite element method (FEM). The static torque of the SRM is estimated through magnetic field analysis. The SRM temperature rise over operation time is estimated through heat transfer analysis. First, static torque and temperature rise over the time of 600W SRM is included in the experiment set, and are compared with the calculated results using the FEM under the same conditions. The validity of the magnetic field analysis and heat transfer analysis is verified by the comparisons. In addition, a 60 [kW] SRM employed in an EV, whose output characteristics are equal to a 1500 [cc] gasoline engine, is designed under magnetic field analysis and heat transfer analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.1089-1095
• /
• 2014

In this study, we compared and analyzed the displacement of final excavation with measured value through an inverse analysis method used in urban excavation construction. We maximized the effectiveness of the inverse analysis method, and plan to achieve cost-effective and practical construction management in the field with identical conditions. As the first stage, we suggest an example of a field which has the inverse analysis method. We applied the inverse analysis method to three different fields on which construction and measuring were finished. Of these three fields, two fields showed a very satisfactory result. However, in one field, there were significant differences between the analysis and measured value. The result of our analysis indicated that, we should unite the conditions of the inverse analysis method and field construction. We need to thoughtfully reconsider the RANKINE earth pressure application in a triangle type. This is because the uniformity of earth pressure is made by its arching effect, in the condition of the displacement of lower underground occurring widely, which is differentiated with the earth pressure conditions of RANKINE, even if the slurry wall has stiffness. Also, when recalculating the soil parameter, we should emphasize the adhesion of the weathering zone, and give experimental consideration to ground water level.

• Journal of Korean Medicine for Obesity Research
• /
• v.22 no.1
• /
• pp.21-29
• /
• 2022

Objectives: This study aimed to examine the changes in ingredients according to its cultivation method by examining the content of saponin and non-saponin components of ginseng. Methods: Ginseng saponin component analysis was compared and reviewed using the high-performance liquid chromatography method, and acidic polysaccharide component was measured using the carbazole sulfuric acid method. Results: The comparative analysis of ginseng saponin content of 4 and 6 years old fresh ginseng showed the following results. According to the cultivation method, upland field cultivation fresh ginseng showed higher average content of crude saponin than paddy field cultivation fresh ginseng. Whereas, paddy field cultivation fresh ginseng showed higher average content of total saponin than upland field cultivation fresh ginseng. Ginsenoside Rb1 showed higher content of paddy field cultivation fresh ginseng than upland field cultivation fresh ginseng in 6 years old ginseng. However, it showed higher content of upland field cultivation fresh ginseng than paddy field cultivation fresh ginseng in 4 years old ginseng. Additionally, ginsenoside Rg1 showed higher content of paddy field cultivation fresh ginseng than upland field cultivation fresh ginseng in 6 years old ginseng, whereas upland field cultivation fresh ginseng showed higher content of paddy field cultivation fresh ginseng in 4 years old ginseng. The effect on the content of ginseng saponins and acidic polysaccharides according to paddy field and upland field cultivation methods is considered to be small. Conclusions: The paddy field cultivation method, which is more efficient in production cost due to depletion of farmland and long-distance cultivation, is considered to be an economical cultivation method.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.4
• /
• pp.111-119
• /
• 2012

Time Stretched Pulse (TSP) is used for transmitting and analyzing the impulse signal over the designated spatial place. However, if transfer functions of transmitter and receiver are unknown, performance investigation of free field in temporal domain is barely possible due to the overlap between the direct and indirect signal from the space. Generally, the free field or hemi-free field is evaluated by the Annex A of ISO 3745 in which utilizing the inverse square law with one-third octave band signals. In this paper, the author performs analysis of free field via applying TSP with inverse square law and the results are compared with the one-third octave band signals. According to the analysis of deviation between the corresponding signal and inverse square law model, the proposed TSP method provides the comparable performance index to the one-third octave band signal with reduced measuring time. Provided that the pre-whitening can be implementable by employing the speaker and microphone transfer function, further analyses from TSP compression are able to be performed such as multipath separation from time domain data. The anechoic chamber used in this experiment is verified conformance with ISO 3745 for free field and hemi-free field condition for limited frequency of the signal.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.36 no.3
• /
• pp.31-38
• /
• 2020

The purpose of this study is to compare between professionalism in medical field(doctor) and architectural design field(architect) in Korea through synchronic and diachronic analysis, with basic requirement of expertise and systemicity, attitude requirement of the publicness, and structural requirement of exclusiveness and autonomy. The medical professionalism adapted by Korean government in the early period of modernization evolved from Western's professional expertise is highly divided as economy grew and society changed. In comparison, architecture was divided into architecture, urbanism, landscape, and interior architecture. Additionally, architectural field was subdivided with architectural design, engineering, construction, structure, and facilities, but architectural design focused on generalized education and practice system. From the systematical point of view, architectural design field has changed profoundly from architectural engineering as 5 year undergraduate educational system was introduced with Korean architectural accreditation. The publicness is approved through health service in medical field and safety and the public domain in architectural design field, but in reality the professionals are viewed as economic interest groups. Hence, the professionalism in both fields is required to reinforce ideology and ethics, and to practice concrete measures for publicness. Compared with the unified organization of medical field, architectural design professionalism faces various difficulties in unifying the organization, such as internal competition caused by tightened architect's requirements, along with external problems from architectural design permission demands of construction companies. In medical and architectural design professionalism, with the appearance of consumerism and stricter governmental regulations, the autonomy is weakened. From the result of comparative analysis, Korean medical field became extremely subdivided and specialized in each department, therefore integration of each disease and establishment of centers are proposed as solutions. By contrast, the reinforcement of expertise in architectural design professionalism might be necessary to strengthen autonomy caused by governmental restriction, and to form architectural culture and secure public architecture.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1722-1725
• /
• 1997

This paper presents image analysis method using a Markov random field(MRF) model. Particulary, image esgmentation is to partition the given image into regions. This scheme is first segmented into regions, and the obtained domain knowledge is used to obtain the improved segmented image by a Markov random field model. The method is a maximum a posteriori(MAP) estimation with the MRF model and its associated Gibbs distribution. MAP estimation method is applied to capture the natural image by TMS320C80(MVP) and to realize the segmented image by a MRF model.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.3
• /
• pp.370-376
• /
• 2009

The influence of magnetic saturation on electromagnetic field distribution in both a permanent-magnet direct-current (PMDC) motor and a field-winding (wound-field) direct-current (FWDC) motor, with the same output mechanical power, has been studied. In this paper, an approximate analytical method and time-stepping Finite Element Method (FEM) are used for prediction of Back-EMF and electromagnetic torque. No-load and rotor-lucked conditions, according to experimental measurements, and the FEM and analytical method studies of the motors have been considered. A sensitivity analysis has also been successfully accomplished on the major design parameters that affect motor performance. At last, these two DC motors are compared, in spite of their differences, on the basis of measured output characteristics.

• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.67-70
• /
• 1991

When analyzing field or optimizing the shape of electrode in three dimensional space by using the surface charge method, we need to divide finely the surface of electrode into surface element like triangle or rectangle. In this case, there exist any variables in field analysis or field optimization. In particular, smoothness on the surface of optimized shape is not good. Recently, A paper is published where introducing NURB curve to field analysis and field optimization about two dimensional space model and axial symmetric three dimensional space model results in reduced variables, enhenced accuracy and improved smoothness. NURB curve has some useful properties like continuity, controllability and locality. Therefore in this paper, in order to improve the demerits of the established optimization method for three dimensional space models, the NURB surface that has same properties in common with NURB curve is used to analyze and optimize simple model.

• Progress in Superconductivity and Cryogenics
• /
• v.5 no.1
• /
• pp.97-101
• /
• 2003

When HTS tapes are used in power application, they are used by winding form, such as, a pancake and a solenoid. When AC current is applied to the coil, Ac magnetic field is generated in winding. This AC magnetic field acts as an external magnetic field and makes loss. In this paper the radial magnetic field component ($B_r$) and the axial magnetic field component ($B_z$) in a pancake and a solenoid were calculated by numerical analysis method and compare with measured value. AC losses of a short sample were calculated by Norris equation and n numerical analysis based on Brandt equation. AC losses of the pancake coil and the solenoid coil were also calculated.