• Journal of information and communication convergence engineering
• /
• v.7 no.2
• /
• pp.209-214
• /
• 2009

The employment of the induction generator is preferable in the natural energy utilization by the minimum maintenance and the mechanical robustness, Another merit is also expected when it is connected to the power network system, because constant-voltage and constant frequency (CVCF) power generation is easily realized in spite of the variation of the rotor speed. However the induction generator needs much amount of the reactive power that reduces power factor in the primary side. The improvement of power factor in the primary side requires large VAR compensator, this point is solved, the merit of the induction machine as a main generator will become more established. This paper proposes a novel approach where the secondary is controlled by a PWM inverter not only to get CVCF power but also to improve the primary power factor. Basically the inverter is controlled so that the field current is supplied from the secondary side in this approach. The required capacity of the inverter is small, because only the slip power is controlled in the secondary side. In the experimental system where the sea wave torque simulator is used, the power factor is well improved by the microcomputer controlled PWM inverter.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.6
• /
• pp.1609-1620
• /
• 1993

A Study on the trombe wall system, a kind of passive solar systems, has been performed numerically. The system is treated as a two-dimensional steady turbulent natural convection including constant heat source per unit area. The numerical code, "PHOENICS, " was employed to analyze this conduction-convection conjugated heat transfer. The general mode of the flow field was examined, and the exchange of mass between two recirculating flows is found to be the major mechanism of the heat transfer. It is shown that the performance is affected by the changes in the geometrical factors-the thickness of the wall, the width between the windowand the wall, and size of the vents. Further analysis has been performed to show the optimal geometry with regard to the last two factors.o factors.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.1
• /
• pp.280-294
• /
• 2023

Unmanned aerial vehicles (UAVs) and millimeter-wave frequencies play key roles in supporting 5G wireless communication systems. They expand the field of wireless communication by increasing the data capacities of communication systems and supporting high data rates. However, short wavelengths, owing to the high millimeter-wave frequencies can cause problems, such as signal attenuation and path loss. To address these limitations, research on high directional beamforming technologies continue to garner interest. Furthermore, owing to the mobility of the UAVs, it is essential to track the beam angle accurately to obtain full beamforming gain. This study presents a beam tracking method based on the unscented Kalman filter using hybrid beamforming. The simulation results reveal that the proposed beam tracking scheme improves the overall performance in terms of the mean-squared error and spectral efficiency. In addition, by expanding analog beamforming to hybrid beamforming, the proposed algorithm can be used even in multi-user and multi-stream environments to increase data capacity, thereby increasing utilization in new-radio multiple-input multiple-output orthogonal frequency-division multiplexing systems.

• Journal of Biosystems Engineering
• /
• v.37 no.4
• /
• pp.225-232
• /
• 2012

Purpose: Accurate monitoring of information from various agricultural vehicles is one of the most important factors for appropriate management strategy of field operations. While there has been a number of study and design on applications of sensors and actuators for data acquisition and control system in tractor, incompatibility between various customized hardware and software has become a major obstacle to the universal deployment in real field operation. International standard for implementation of electronic control unit (ECU) in agricultural vehicles has becoming a mandatory requirement for inter-operation compatibility in the international trade of agricultural vehicle industries. The ISO 11783 standard is basically based upon well known communication technology designated using the controller area network (CAN) bus. While CAN bus could provide 1.0 Mbps of communication speed, the standard only recommended 250 kbps. Methods: This study presents the implementation and evaluation of ISO 11783 for tractor electronic control units (TECU)with a higher transmission rate from multiple ECU than 250 kbps. Throughput and loss rate of the developed prototype were calculated across manipulated bus load for laboratory experimental tests, and the maximum requirement of transmission rate by ISO 11873 was satisfied with lower than 60% of bus load. Results: Field tests with a TECU implemented to process messages from global positioning system (GPS) receiver resulted that the root mean square error of position information was lower than 4 m with 0.5 m/s as a travelling speed. Conclusions: Results of this study represent the utilization of the international standard ISO 11783 to providepractical developments in terms with the inter-operability of TECU.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.2 no.2
• /
• pp.15-26
• /
• 1999

A horticultural field database system is constructed for the intelligent farm management using GIS. The database system include both spatial and attribute data of the GIS that can be used as useful information for the farmers every year. The result of the research is summarized as follow; First, the system provides the position, attributes and spatial data of the horticultural farm through AML. Second, the user interface that composed of a basic function menu and application menu is easy to use. Third, the method which applicated overlay and analysis would be need to manage farming data in this horticultural farm and to develop a dynamic decision support system interfaced with GIS.

• Journal of Korea Multimedia Society
• /
• v.17 no.2
• /
• pp.152-159
• /
• 2014

Recently. utilization of remote sensing exploration and cloud computing has been extended to efficient measurement, store, and update of bathymetry map data according to cloud computing technology. In the field of real ocean, water depth measurements and measurement data management, distribution, and display equipment for the development and dissemination have generated a lot of time and cost. To improve these problems, through real-time three-dimensional display system at this location, we can determine the importance of measurement activities, and reduce the time and cost of measurement activities. Data measured from marine probe vessels and remote sensing exploration equipments and other various channels can be handled and managed. In this paper, we propose a realtime three-dimensional display system through the depth measurements from remote sensing exploration. The proposed real-time three-dimensional display system can be effectively applied in the field of measurement of the topographical survey of the land as well as bathymetry of the sea.

• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.304-312
• /
• 2016

Purpose: Soil strength has been measured using a cone penetrometer, which is making it difficult to obtain the spatial data required for precision agriculture. Our objectives were to evaluate real-time horizontal soil strength (RHSS) to measure soil strength in real time while moving across the field. Using the RHSS data, the tillage depth was determined, and the power consumption of a tractor and rotavators were compared. Methods: The horizontal soil-strength index (HSSI) obtained by the RHSS was compared with the cone index (CI), which was measured using a cone penetrometer. Comparison analysis in accordance with the measurement depth that increased at 5-cm interval was conducted using kriged maps at six sensing depths. For tillage control and evaluation of the power consumption, the system was installed with a potentiometer for tillage depth, a torque sensor from the rear axle, and a power take-off (PTO) shaft. Results: The HSSI was lower than the CI, but they were the same at 54.81% of the total grids for the 5-cm depth and at 3.85% for the 10-cm depth. In accordance with the recommended tillage map, tillage operations between 0 and 15 cm left 2.3% and 7% residue cover on the soil, and that between 20 and 10 cm covered a wider utilization of 3% and 18.4%, respectively. When the tillage depth was 15 cm, the comparison result of the power requirements between the PTO and rear axle in terms of control performance revealed that the maximum power requirements of the axle and PTO were 44.63 and 23.24 kW, respectively. Conclusions: An HSSI measurement system was evaluated by comparison with the conventional soil strength measurement system (CI) and applied to a tractor to compare the tillage power consumption. Further study is needed on its application to various farm works using a tractor for precision agriculture.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5290-5299
• /
• 2011

The ultimate purpose of this research is to propose a method to improve water supply management efficiency. As an effort to solve this comprehensive problem, the purposes of this paper are summarized into the following two main subjects. One is the development of a series of demand forecasting models targeting for each theme of urban water such as residential, commercial, industrial water. The other is the suggestion on the development and utilization plan of a GIS-based information system where the developed models are incorporated. For these, a series of efforts were performed such as evaluating and choosing of the candidate field areas, selecting a proper sensor and an installation point for each theme. Installed are sensors, a wireless communication infrastructure, and a field data acquisition and management server. Developed are a protocol for the wireless communication and a real-time data monitoring system. Nextly, the urban water facility-related and other necessary data were handled to make those into a series of GIS-ready databases. Finally, a GIS-based management system was designed and a blueprint for the implementation is suggested.

• Journal of People, Plants, and Environment
• /
• v.23 no.4
• /
• pp.423-432
• /
• 2020

Background and objective: Traditional farming is winning recognition as a sustainable alternative farming method. As urban farming increases in South Korea, it is crucial to develop more sustainable farming techniques. Gyeonjongbeop is the traditional farming method introduced in the Joseon period. This study was conducted to propose a productive garden model suitable for urban farming through the interpretation of traditional farming methods contained in Imwongyeongjeji Bolliji and to test the model on an actual field. Methods: Using the design and cropping system of Gyeonjongbeop as the research materials, we reviewed its tillage and cultivation and examined the applicability. We proposed a modified method by extracting parts applicable to urban farming. According to the methods, we created a garden with ridges and furrows, cultivated proper vegetables, and evaluated their growth. Results: Raphanus sativus, Allium fistulosum L., Brassica juncea, and Spinacia oleracea grown on ridges showed higher growth than those grown on a conventional flat field. The growth of Hordeum vulgare var. hexastichon and Triticum aestivum L. on furrows was also slightly higher. This proved that the method could make up for the deficiencies of barley and wheat that are weak against winds and cold and are easily destroyed by the spring rains. Conclusion: Ridge and furrow cultivation derived from Gyeonjongbeop can be an efficient urban farming system compared to the conventional cultivation in flat fields. The system can use fallow lands in winter for year-round urban farming. In addition, the application of the traditional farming system can enhance the humanistic value of urban farming.

• Journal of the Korean Society for Library and Information Science
• /
• v.28
• /
• pp.109-133
• /
• 1995

This study assessed citation analysis results in light of their usefulness for national scientific and technical information (STI) policy formulation and review in Korea. using electrical and electronics engineering field as a case. After brief summary of citation analysis results was presented. current Korean STI policy was reviewed. which aims at establishing national STI sharing system by constructing many STI databases and information networks. Citation analysis results were discussed in light of their significance for Korean databases and information network construction and for use of informal networks such as E-Mail and invisible colleges. The problem of access to current information was also reviewed. Some recommendations were made to policy makers. which include creation of a centralized national STI center: development of guidelines for effective utilization of STI networks and STI; and. standardization of information processing technology and support for the automation of information centers and libraries. Based on the literature review. the best possible way of presenting recommendations to policy makers was examined. It was concluded that citation analysis could be a useful methodology for STI policy formulation and review when reliability and validity of the study is assured and the samples well represent the population of scientists and engineers. Finally recommendations for further research were offered.