• Journal of Korean Society of Forest Science
• /
• v.83 no.4
• /
• pp.545-555
• /
• 1994

The objective of the study was to provide the useful scientific data on the early rehabilitation of the legging road after timber harvesting in the forest area. This study was carried out at logging roads which were constructed during 1989 and 1994 in Mt. Baekwoon. The field survey was conducted in July, 1991. Judging from the analysis of soil bulk density, time required for recovery as the undisturbed forest soil condition was more than 10 years in the road which was left, and the regression equation is as follows, $$Y_1=1.4195-0.0744{\cdot}X(R^2=0.91)$$ $$Y_2=1.4673-0.0688{\cdot}X(R^2=0.73)$$ (X : elapsed year after road construction. $Y_1$, $Y_2$ : soil bulk density($g/cm^3$) at 0~7.5cm, and 7.5~15.0cm, respectively) Especially soil bulk density with buffer strip-woods was $0.890-0.903g/cm^3$, so it was 20% lower than that of logging road surface without buffer strip-woods. Among the 7 factors, location, sand content, and soil hardness had statistically significant effect on the soil bulk density in logging road surface. The pioneer species on logging road surface were Rhus cratargifolius, Prunus chinensis, and Lespedeza cyrtobotrya, etc. in woody species, and Pteridium aquilinum, Arundinella hirta, and Lysimachia clethroides, etc. in herb species. So, in process of year, average plant coverage were 70% on cutting and banking slope and 20% on logging road surface which elapsed 6 years after logging road construction. Through this research, buffer strip-woods must be remained for environmental conservation of forest conditions, and from the time to be closed the road, planting, seeding, and grazing works could be effective to the soil condition and vegetation recovery.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.1
• /
• pp.1-11
• /
• 2010

This study examines the authentic meaning, location, garden layout, and structural characteristics of Suwoojae(守愚齋), the birth house of Garam Byungi Lee, which was the very epitome of the traditional house structure based on literature review, field survey, and the existing measured drawings. The followings explain how rusticity and spirit of scholars, the core concepts of Garam's poetry, were featured in structural and spacial arrangements of Suwoojae as well as its location and physical layout. 1. Suwoojae is enclosed by Cheonho mountain which fans out of Noryoung mountains in East and located on the tail of Yongwha mountain in West. It has proved to be Yangtack Myoungdang according to the Poongsoo theory, Inguljiryoungron; The energy of earth at a certain location results in the better fortune together with the energy emitted from human body. 2. Suwoojae is an official local monument which was built in 1844, late Joesoen Dynasty by Joheung Lee, Garam's grandfather. Some parts of inner-structure connect with the kitchen in the shape of called Gopae. Suwoojae consists of 4 Sarangchae, 3 Gobangchae, and a Jangdokdae behind Anchae. 3. Since inner and outer walls of Suwoojae are distinctly separate from the main structure, its look varies significantly from different angles. Suwoojae, in its entirety, discloses Garam's philosophy, ideas, and ideology on life and the universe. 4. Apricot trees, Japanese-magnolias, aromatic-trees, crape myrtle, white-magnolias, camellia-trees were planted on the left of the walls, and persimmon trees, jujube trees, plum trees, quince trees were at the inner-yard. Especially, trifoliate orange trees a natural monument of Jeonrabukdo draw substantial attention from visitors. 5. The main garden facilities are located in front of Sarangchae: A rectangle pond(14.72m in length and 3.87m in height), the surroundings of the pond and Anchae, rocks that have distinctive shapes. In general, the garden was designed to incorporate the scenery around Suwoojae as a part of its structure and contain the love for nature and aesthetic sense. 6. It seems that the natural surroundings of Suwoojae had helped form motives of Garam's poetry and assisted him in finding subject-matters and identifying the themes of his works. This is well revealed in his poem, Seungwoonjungee.

• The Korean Journal of Quaternary Research
• /
• v.15 no.2
• /
• pp.101-109
• /
• 2001

The landscape changes at the Mujechi moors I and II during the last twenty two years were analysed using a tree ring analysis of pine trees, a distributional pattern of pine tree, an aerial photograph interpretation and a measurement of firebreak line. The analysis of aerial photographs(taken in 1978, 1988, 1998) indicates that the area of Mujechi moors I and II have gradually decreased. The decreased rate of moor area was relatively high, i.e.,-23.9 %(1978~1988) and -16.4 %(1998~1998) at the Mujechi moor I, but a little bit low, i.e., -2.6% (1978~1988) and -12.6 % (1998~1998) at the Mujechi moor II. However, dendrochronological analysis of pine trees at moors I and II shows that the appearance rates of pine trees per $100\textrm{m}^2$ at moor I and II were 0.28 and 0.57 respectively. And the number of younger pine trees(height is under 1.5m, DBH is less than 2.5 cm) invaded into moors are numbered eleven at the moor I, and ten at the moor II. This shows that the shift of a wetlands into a land was faster at the moor II than the moor I. The construction of a firebreak line and waterway along the moors I and II areas since the December, 1995, has diverted watershed flow and prohibited the runoff flow into the moors. The analysis of GIS suggests that the decreased watershed area were about $11,413.8\textrm{m}^2$(12.1 % of whole watershed area) at the moor I and $15,969.5\textrm{m}^2$(40.4 % of whole watershed area) at the moor II. The negative impact of firebreak line on the inflow of water into the moors I and II and destruction of vegetation along the firebreak line are noticeable from the field survey.

• Journal of the Korean Geographical Society
• /
• v.31 no.3
• /
• pp.489-507
• /
• 1996

The purpose of this study is to examine the increasing number of unregistered manufacturing plants and related problems, and to recommend alternative solutions to the problems. Data are obtained from a field survey of randomly selected small scale manufacturing plants in Seoul and its suburban cities. A total number or respondents are 533, and 416 of them are unregistered plants. The Capital Regional Planning has had a goal during last three decades to lead a balanced regional economic development by restriction manufacturing plants in the Capital Region and by encouraging them in other regions in the nation. It was 1984 when a comprehensive planning was established to achieve this goal. Sets of various regulations, by-laws and codes have been implemented to regulate manu-facturing activities in the Capital Region to achieve the goal. The region is divided into three sub-regions, and a different degree of regulations is applied to each sub-region. Only a certain types of industries are allowed in a particular sub-region. For instance, a plant manufacturing high-technology products could be allowed in the most urbanized sub-region. All manu-facturing plant in the Capital Region which has ares size of larger than 200"\;"$m^2$ is compulsory to register to the local government office. In practice, however, it is not common or sometimes almost impossible to get approval for many applicant manufacturers because of strict regulations. There have been increasing number of plants in the Capital Region during last several decades, despite the strict regulations. Many of those newly established plants are without formal registration at the local administration office. howerver. These are so called 'unregisterd' plants. Surveyed data and many government official data show that many of unregistered plants have been established in recent years. which indicate that current regulations are no longer effective. The number of unregistered plants are increasing tin the Capital Region because of many locational advantages in the region for plants, particularly those in small scale. Unregistered plants are the source of many problems, such as local water pollution or noise pollution in residential areas. There are also many administration problems, bed\cause they are not registered. The central government has attempted to cure the problems of unregistered plants. For example, the government allowed a unregistered plant to remain at present site for three ydars, if it met certain conditions in three years. However, this program was unsuccessful because many of those plants were not able to meet the concitions. Three times the government renewed the term for those which did not meet conditions since 1989, but it was afraid to be without success. There are many evidences that current policies to control manufacturing plants are not effective. The Capital Region must face mounting problems if ploicies are not reformed soon. This study suggests that the policy of the Capital Regional Planning has to be reoriented to provide more favorable policies for manufacturing plants in the Capital Region than current regulations which is aimed to restrict manufacturing activities. It is time to improve many existing problems in the region through reforms and of current regulations to foster unregistered plants. This study also proposes many smaller-area sub-divisions instead of current three large area sub-regions which is too broad to apply single kind of regulation, or codes. Flexible regulations and codes can be applied to such a small-area sub-divivisions based on location and industrial characteristics of the individual sub-divisions. It is necessary to provide decent industrial environment in the Capital Region, which is best equipped to provide many favorable industrial locational factors in the nation, thus this nation can be further prepared to compete in an inter-national market at an era of globalization in manufacturing.

• Archives of design research
• /
• v.13 no.1
• /
• pp.209-218
• /
• 2000

The purpose of this study was to improve the curriculum for industrial design department in the junior colleges. In order to achieve the purpose, two methodologies were carried out. First is job analysis of the industrial designers who have worked in the small & medium manufacturing companies, second is survey for the opinions of professors in the junior colleges. Some results were as follows: 1. The period of junior college for industrial designers is 2 years according to present. But selectively 1 year of advanced course can be established. 2. The practice subjects same as computational formative techniques needed to product development have to be increased. In addition kinds of selection subjects same as foreign language, manufacturing process, new product information and consumer behavior investigation have to be extended. 3. The next subjects need to adjust the title, contents and hours. (1) The need of 3.D related subjects same as computer modeling, computer rendering, 3.D modeling was high. The use of computer is required to design presentation subjects. (2)The need of advertising and sale related subjects same as printing, merchandise, package, typography, photography was low, the need of presentation techniques of new product development was high. (3) The need of field practice, special lecture on practice and reading original texts related subjects was same as at present, but these are not attached importance to form. As the designers feel keenly the necessity of using foreign language, the need of language subject was high.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.55-62
• /
• 2006

Transverse cracks in continuously reinforced concrete pavement (CRCP) occur at early ages due to temperature and moisture variations. The width and spacing of transverse cracks have a significant effect on pavement performance such as load transfer efficiency and punchout development. Also, crack widths in CRCP depend on 'zero-stress temperature,' which is defined as a temperature where initial concrete stresses become zero, as well as drying shrinkage of concrete. For good long-term performance of CRCP, transverse cracks need to be kept tight. To keep the crack widths tight throughout the pavement life, zero-stress temperature must be as low as practically possible. Thus, temperature control at early ages is a key component In ensuring good CRCP performance. In this study, concrete temperatures were predicted using PavePro, a concrete temperature prediction program, for a CRCP construction project, and those values were compared with actual measured temperatures obtained from field testing. The cracks were also surveyed for 12 days after concrete placement. Findings from this study can be summarized as follows. First, the actual maximum temperatures are greater than the predicted maximum temperature in the ranges of 0.2 to 4.5$^{\circ}C$. For accurate temperature predictions, hydration properties of cementitious materials such as activation energy and adiabatic constants, should be evaluated and accurate values be obtained for use as input values. Second, within 24 hours of concrete placement, temperatures of concrete placed in the morning are higher than those placed in the afternoon, and the maximum concrete temperature occurred in the concrete placed at noon. Finally, from the 12 days of condition survey, it was noted that the rate of crack occurrence in the morning placed section was 25 percent greater than that in the afternoon placed section. Based on these findings, it is concluded that maximum concrete temperature has a significant effect on crack development, and boner concrete temperature control is needed to ensure adequate CRCP performance.

• Journal of Science Education
• /
• v.38 no.3
• /
• pp.525-542
• /
• 2014

This study was performed to look into the difficulty of students in understanding science stories in 6th grade science textbooks and to analyze those factors. To do this, 6th grader (N=65) were selected from J Elementary School located in Gyeonggi-do Siheung-si as study subjects. 26 science stories in 6th grade science textbooks were classified by field and context (complement of knowledge, science history of scientists, science in life, cutting-edge science technology, environment issues) in which the characteristics were investigated and analyzed. Also, a survey about the difficulty in understanding science stories(26 items) was conducted(65 students) and a semi-structured interview was conducted for students to clarify the meaning of collected data from surveys(4 students). As result of analyzing surveys on science story context in science textbooks and interviews, 4 fields of 'energy,' 'matter,' 'life,' and 'earth' were evenly mentioned. Science in life and complement of science knowledge were mentions most for context and this had relation with the characteristic of science textbooks to provide many opportunities to apply learned knowledge in actual social issues. Reactions of students on science stories were mostly positive that they help studying science, but there was also difficulty in well understanding science stories. Difficulty of understanding context, problems of context suggesting methods, difficulty of science terminology, lack of interest, and etc. were analyzed as factors. Specific causes were mentioned to be description type class, unimportant context, lack of explanation on suggested context, problem of pictures by students.

• Korean Journal of Weed Science
• /
• v.31 no.3
• /
• pp.279-288
• /
• 2011

To suggest the weed management technique for environment friendly rice cultivation, we investigated occurrence patterns of weeds, the actual condition of weed management, and rice yield at the environment friendly agricultural complex located in Honam and Chungnam regions. The practical performance of weed management was relatively satisfactory in decreasing order of agricultural technique with golden-apple-snail (GAS) > agricultural technique with duck (Duck) > agricultural technique with rice bran (RB) > agricultural technique with soft-shelled turtle (ST). In the rice fields employed by agricultural technique with GAS, the dominant weeds were Echinochloa crus-galli, Ludwigia prostrata, Monochoria vaginalis, Sagittaria trifolia, and Aneilema keisak. However, E. crus-galli, M. vaginalis, L. prostrata, Aeschynomene indica and Bidens frondosa were found as dominant weeds at the fields using the Duck and E. crus-galli, M. vaginalis, L. prostrata, Polyganum hydropiper and Eleocharis kuroguwai at the fields using RB. In comparison of rice yield ($5.2\;MT\;ha^{-1}$) obtained from the conventional cultivation using herbicides, about 93% was reached by Duck, about 91% by GAS, about 92% by RB, and about 78% by ST. When rice qualities obtained from environment friendly rice cultivation were compared with those from the conventional cultivation, the producing rates of perfect kernel, immature kernel, immature opaque kernel, cracked rice, and damaged kernel were lower in the former cultivation, whereas contents of protein, amylose, and fatty acid were similar in the two cultivation methods. The problems found in the environment friendly agriculture were poor plowing and harrowing, carless irrigation management, and geological poor condition as cultivation area with cold water. These have caused severe infestation of weeds, frequent incident of disease and insect pest, and rice lodging. This resulted in reduction of rice yield as high as about 32 to 79% as compared with the conventional cultivation using herbicides.

• Korean Journal of Organic Agriculture
• /
• v.14 no.1
• /
• pp.55-67
• /
• 2006

A survey of 31 organic farmers were conducted to investigate the actual conditions of organic matter application. The amounts of organic matter application in the fields were higher in order of fruit, vegetable and rice farm. The average was 50 ton/ha in vegetable farms. In the green vegetable farms saw dust and animal manure were mainly utilized to make compost. Rice straw, wood chip, and forest bushes were also used for composting. In the fruit vegetable farms materials relatively lower in nitrogen content such as rice straw and cattle manure were used in vegetative period and materials higher in nitrogen content such as oil cake and wild grass were used in reproductive phase. Nutrient balance investigated in the farm in Icheon region who produce lettuce, angelica, and kale continuously in one cropping year indicated surplus in three major nutrients. Nitrogen and phosphorous were in excess by 29 and 10 kg respectively in the organic rice farm in yang-pyoung region. While soil chemical properties in the organic farms are within the adequate range in open field, it is much higher than the limits in the greenhouse soils. Overall application of organic matter is in an oversupply state. This results suggested that the organic matter management should be based on the soil conditions for sustainable cultivation. Chemical composition of organic matters and soil test reports should be considered prior to the application of organic matter.

• Korean Journal of Remote Sensing
• /
• v.31 no.5
• /
• pp.385-394
• /
• 2015

Pine wilt disease has greatly damaged pine forests not only in East Asia including South Korea and China, but also in European region. The damage caused by pine wood nematode (Bursaphelenchus xylophilus) is expressed in bundles within stands and rapidly spreading, however, present field survey methods have limitations to detecting damaged trees at regional level. This study extracted the damaged trees by pine wilt disease using time series hyperspectral aerial photographs, and analyzed their distribution characteristics. Hyperspectral aerial photographs of 1 meter spatial resolution were obtained in June, September, and October. Damaged trees by pine wilt disease were extracted using Normalized Difference Vegetation Index (NDVI) and Vegetation Index green (VIgreen) of the September photograph. Among extracted damaged trees, dead trees with leaves and without leaves were classified, and the spectral reflectance values from the photographs obtained in June, September, and October were compared to extract new outbreaks in September and October. Based on the time series dispersion of extracted damaged trees, nearest neighbor analysis was conducted to analyze distribution characteristics of the damaged trees within the region where hyperspectral aerial photographs were acquired. As a result, 2,262 damaged trees were extracted in the study area, and 604 dead trees (dead trees in last year) with leaves in relation to the damaged time and 300 and 101 newly damaged trees in September and October were classified. The result of nearest neighbor analysis using the data shows that aggregated distribution was the dominant pattern both previous and current year in the study area. Also, 80% of the damaged trees in current year were found within 60 m of dead trees in previous year.