• 한국군사과학기술학회지
• /
• 제9권2호
• /
• pp.11-19
• /
• 2006

The underwater electromagnetic signatures of a naval ship are mainly generated from three sources which are the permanent and induced magnetic field in the ship's hull and other ferrous components, the cathodic current electromagnetic field established by the Impressed Current Cathodic Protection(ICCP) system or the Sacrificial Anode and the stray electromagnetic fields generated by onboard equipment. These signatures can be minimized by certain design methods or installation of signature reduction equipment. In this paper, we represented the characteristic of the underwater electromagnetic signature and the signature reduction techniques for a naval ship. Also, we measured the electromagnetic field changes emitted from the real ship using the Electric and Magnetic field Measurement System(EMMS). We found that the underwater electromagnetic signature for a naval ship can be used as input or trigger signal in a surveillance system and an influence mine.

• 한국인터넷방송통신학회논문지
• /
• 제19권4호
• /
• pp.105-111
• /
• 2019

본 논문에서는 근접전계 시험을 수행하여 Ka 대역 밀리미터파 탐색기용 도파관 광벽 슬롯 배열 안테나의 성능 검증을 수행하였다. 슬롯 배열 안테나의 측정은 원전계, 근접전계 시험을 모두 수행하고 비교하여 밀리미터파 대역의 근접전계 시험의 유효성을 확인하였다. 검증을 수행한 슬롯 배열 안테나의 빔폭 및 부엽 준위를 포함한 빔 패턴 특성이 동일함을 확인하였다. 방위각, 고각 빔패턴의 부엽준위 차이는 1dB 이내로 검증되었다. 추가로 back-projection 기법을 활용하여 근접전계 데이터를 가공한 후 안테나 개구면의 분포를 새롭게 추출하여 배열 안테나 성능 분석을 수행하는 방법에 대하여 소개하였다.

• 디지털융복합연구
• /
• 제11권11호
• /
• pp.85-94
• /
• 2013

본 논문에서는 기존 DTV 커버리지 측정차량의 문제점을 해결하고 효율적으로 전파 음영지역을 찾아내기 위해 고정식 DTV전파측정차량의 기능을 포함하면서도 이동하며 전파수신현황 및 수신상태를 측정할 수 있는 다중 안테나 이동측정시스템을 제안한다. 제안된 시스템은 모두 4개의 무지향성(omni-directional)안테나와 고정측정을 위한 1개의 지향성(directional)안테나를 포함하며, 공간 다이버시티(space diversity)를 활용하여 운용할 수 있도록 각각의 안테나마다 측정장비를 배치하고 각각의 측정값을 실시간으로 수집하고 처리한다. 제안된 시스템의 효용성을 보이기 위해 국내 수신 전파 환경을 3가지 유형으로 모델링하고 이들 지역에서 집중적인 측정을 실시하였다. 또한 측정 결과의 상세한 분석을 토대로 이동측정 및 고정측정간의 상관관계를 밝히고자 하였다. 특히 제안된 시스템의 적용을 위한 실험에는 방송사 현업 실무자들이 측정 및 결과 정리에 공동으로 참여하는 등 객관성을 확보하고자 하였으며 개발 장비를 국책 연구기관의 인위적 난시청 조사사업에 일부 적용하는 등 실제 방송 커버리지 관리 업무에 적극적으로 활용하고 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
• /
• pp.275-285
• /
• 1996

A noise measurement method of the multi-sound sources in a reverberation field with wave-guide is developed by experimental method. In the reverberation field, it is very hard to measure sound level or noise spectra of a certain sound source, when many sound sources generate noise simultaneously with a small space between them. Flexible wave-guide(tube) was used to measure noise level in a reverberation field. One end of the tube is attached to a sound source and the other end is closed with an anechoic terminal. Detailed method of the measurement and the source of error was considered as well.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2004년도 추계 종합학술대회 논문집
• /
• pp.280-284
• /
• 2004

안테나의 특성 중 지향성(Directivity)과 관계있는 방사 패턴을 측정하기 위한 저가의 근역장 측정 시스템을 설계한다. 근역장 측정방법은 평면주사법에 기반을 둔 개선된 원통형 주사법 공식을 이용한다. 고가의 측정 장비인 네트워크 분석기를 대체하기 위한 방법을 제시하고 필요한 장치 규격을 제안한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.694-699
• /
• 2003

Simultaneous measurement with PLIF(Planar Laser-Induced Fluorescence) and Stereo-PIV(Stereoscopic Particle Image Velocimetry) was performed to investigate the structural characteristics of flow field in Rushton Turbine Mixer. Instantaneous 3D velocity fields are measured by two 2K ${\times}$ 2K CCD cameras focused on an object plane with the angular displacement methods while the concentration fields are obtained through the measurement of the fluorescence intensity of Rhodamine B tracer excited by the second pulse of Nd:Yag laser light. Image distortion due to the camera view-angle is compensated by a mapping function. Finally, the spatial structures of turbulent mixing around Rushton turbine were identified by the calculation of cross-correlation fields between the velocity and concentration field.

• 국제초고층학회논문집
• /
• 제3권4호
• /
• pp.305-310
• /
• 2014

Wind-induced responses of a structure are often evaluated through dynamic analysis, where measured wind forces obtained from a wind-tunnel test and dynamic properties obtained from a FE (Finite Element) model are utilized. However, the FE model generally shows considerable discrepancies in the estimation of natural frequencies compared to field measurements due to some assumptions and simplifications. In this paper, a calibration method that can improve the estimation of natural frequencies in the FE model is proposed, and specific cases are studied for its validity with comparison to the field measurement results.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.1289-1292
• /
• 2006

The demand on a turnout layed on a bridge is rising owing to the increasing number of stations on the viaduct. And also the demand on a turnout with CWR is rising to upgrade running speed of the passing train. A CWR connected with turnout is subjected to additional axial force induced by the actions due to change in temperature, braking and starting force, and bending of the deck. But magnitude and distribution of the axial force in rails of turnout is not clear yet. So, in this study, a field measurement was conducted to know them. The strain gage method was adopted for field test. The FBG sensor for the strain measurement was used to ensure stability of test value and durability of gage for long term. It is expected that we can get data on the axial force in rail connected with turnout with respect to seasonal temperature change by the established field test system.

• 한국가시화정보학회지
• /
• 제19권3호
• /
• pp.77-83
• /
• 2021

Solid oxide fuel cell (SOFC) operates at high temperatures in range of 600-800℃. Since layers of SOFC are composed of different substances, different thermal expansion in SOFC can result in defects under high temperature conditions. For understanding relation between temperature field and the thermal deformation in SOFC, temperature and strain field were simultaneously estimated using thermographic phosphors by optical measurement. Temperature fields were obtained by the life-time method, and the temperature differences of one specimen was checked with thermocouple. The thermal deformation was estimated by digital image correlation (DIC) method with extracted phosphorescence images. To investigate the deformation accuracy of DIC measurement, thermographic phosphors were coated with and without grid pattern on aluminum surface. Simultaneous measurement of temperature fields and thermal deformation were carried out for YSZ. This study will be helpful to multi-sensing of temperature field and thermal deformation on SOFC cells.

• 한국초전도ㆍ저온공학회논문지
• /
• 제24권3호
• /
• pp.52-56
• /
• 2022

Single-grain (c-normal or c-parallel) and multi-grain YBCO superconductors were prepared by a melt growth process with/without seeding. The magnetic levitation force and trapped magnetic field at liquid N₂ temperature (77 K) of the YBCO superconductors were investigated. Samples for the levitation force measurement were zero-field cooled (ZFC) to 77 K, and samples for trapped field measurement were field-cooled (FC) using Nd magnets. As for the magnetic levitation force, the c-normal, single grain sample showed the largest value, whereas the multi-grain sample showed the lowest value. The trapped magnetic field of the c-normal and c-parallel single-grain samples was 4-5 times that of the multi-grain sample. In addition, as the external magnetic field (the number of magnets) increased, the both properties increased proportionally. These results were explained in terms of the orientation dependence of the levitation forces and the magnetic field trapping capability of the YBCO superconductor.