• 한국추진공학회지
• /
• 제19권6호
• /
• pp.26-32
• /
• 2015

본 연구에서는 파괴인성에 대하여 입자강화 복합재 추진제의 균열저항 특성을 분석하기 위하여 평가되었다. $50^{\circ}C$에서 $-60^{\circ}C$까지 온도 범위에서 WST 시험편을 이용하여 파괴인성시험이 수행되었다. 파괴인성에 대한 평가방법은 선형탄성파괴역학에 기초한 ASTM E399를 이용하여 산출하였다. 추진제의 분열하중과 응력확대계수는 온도가 내려감에 따라 증가하고 있다. 또한 디지털 이미지 상관법을 이용하여 가시화된 변형률장은 온도가 $50^{\circ}C$에서 $-40^{\circ}C$로 내려갈수록 증가하나, $-60^{\circ}C$에서 변형률장은 취성거동으로 인해 크게 감소한다.

• 한국압력기기공학회 논문집
• /
• 제12권1호
• /
• pp.62-69
• /
• 2016

Current guidance considers that uniaxially loaded specimen with a deep crack is used for the determination of the ductile-to-brittle transition temperature. However, reactor pressure vessel is under biaxial loading in real and the existence of deep crack is not probable through periodic in-service-inspection. The elastic stress intensity factor and the elastic-plastic J-integral which were used for crack-tip stress field and fracture mechanics assessment parameters. The difference of the loading condition and crack geometry can significantly influence on these parameters. Thus, a constraint effect caused by differences between standard specimens and a real structure can over/underestimate the fracture toughness, and it affects the results of the structural integrity assessment, consequentially. The present paper investigates the constraint effects by evaluating the master curve $T_0$ reference temperature of PCVN (Pre-cracked Charpy V-Notch) and small scale cruciform specimens which was designed to simulate biaxial loading condition with shallow crack through the fracture toughness tests and 3-dimensional elastic-plastic finite element analyses. Based on the finite element analysis results, the fracture toughness values of a small scale cruciform specimen were estimated, and the geometry-dependent factors of the cruciform specimen considered in the present study were determined. Finally, the transferability of the test results of these specimens was discussed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권9호
• /
• pp.1075-1080
• /
• 2014

본 연구는 5MW급 해상풍력 하부구조물개발에 있어 설계에 필요한 다양한 해양환경 조건에 대하여 높은 안정성 확보가 요구되는 해상용 풍력발전 하부구조물과 관련, 구조물의 설계방법을 제시하고 그 안정성을 고찰하여 관련 기술 분야에 기여함을 목표로 한다. 특히, 5MW급 해상풍력발전 시스템에 대해 시험영역에서 큰 바람의 방향이 지속되고 있는 동안에 동시에 발달된 파도의 계산에 대한 정보를 제공한다. 그러므로 바람의 영역과 접근하는 파동 행열간의 관련성을 검토하여 강도, 방향 그리고 시간의 이동성을 계산할 수 있음을 확인하였다. 쇄파에서의 국부적인 압력분포를 물리적인 모델링과 수치적 모델링을 통해 조사하는 것이 가능하다. 해상 풍력 에너지 변환장치의 지지구조물들에 대해 최근 적용된 구조 및 피로에 대한 평가는 일반 설계규칙에 근거했다. 5MW 해상풍력 하부구조물은 제약조건이 많아 단일구조로 취급하는데 이는 생산에서 높은 안전계수를 고려해야함을 의미한다.

• 한국직업건강간호학회지
• /
• 제29권4호
• /
• pp.342-353
• /
• 2020

Purpose: This study aimed to systematically review literature and conduct a meta-analysis to comprehensively identify and evaluate the effects of workplace risk assessment-based ergonomic intervention on work-related muscular-skeletal disorders in workers. Methods: We searched the Ovid-Medline, EMBASE, and Cochrane library and up to 2018 using search terms such as muscular-skeletal, disorder, impairment, work-related muscular-skeletal disorders, ergonomic, intervention, management with no language limitations; screened reference lists; and contacted experts in the field. Results: We identified 545 references and included 13 randomized controlled tests (3,368 workers). We judged nine studies to have a low risk of bias, while the other four studies have a high risk of bias. Conclusion: Ergonomic intervention based on risk assessment in the workplace did not significantly differ in terms of the intensity of pain or duration of workers in the workplace, but low-quality evidence decreased the frequency of musculoskeletal disorder pain in three to six months moderate-quality evidence and in six to nine months low-quality evidence. Besides, low-quality evidence to reduce discomfort and moderate-quality evidence to improve worker posture. Therefore, ergonomic intervention based on the assessment of risk factors in the workplace should be applied to reduce pain frequency and discomfort and improve workers posture among musculoskeletal disorders.

• 대한기계학회논문집A
• /
• 제39권6호
• /
• pp.583-588
• /
• 2015

완전접촉 문제를 이론적으로 해석하기 위해서 점근해법이 많이 사용된다. 점근해로서의 응력장은 특이항 만으로 구성되므로 접촉경계로부터 멀어질수록 정확도가 감소한다. 이에 반해 유한요소해석 방법은 요소크기의 제한으로 인해 완전접촉 문제에서의 응력특이성을 엄밀히 표현할 수 없다. 따라서 본 연구에서는 이론적 해법을 보조하고 또 그와 비교하기 위해 응착접촉 상태에 있는 완전접촉 문제를 이론적으로 해석한 후, 모아레 실험 및 유한요소해석 방법으로 접촉부 부근의 응력장을 분석하였다. 실험은 알루미늄과 구리 합금을 접촉각 $120^{\circ}$, $135^{\circ}C$로 가공하여 수행하였으며 모아레 무늬로부터 얻은 변위장과 유한요소해석을 수행한 결과와 비교하였다. 이로부터 타당성이 확보된 수치적 방법을 이용하여 실험조건에서의 일반화 응력확대계수와 접촉부 응력장을 구하여 이론 해와 비교하였으며, 접촉경계로부터 멀어질 때 나타나는 이론과 수치 해의 차이를 분석하였다.

• Smart Structures and Systems
• /
• 제25권1호
• /
• pp.81-96
• /
• 2020

Wind measurements were made on the Canton Tower at a height of 461 m above ground during the Typhoon Vincente, the wind-induced accelerations and displacements of the tower were recorded as well. Comparisons of measured wind parameters at upper level of atmospheric boundary layer with those adopted in wind tunnel testing were presented. The measured turbulence intensity can be smaller than the design value, indicating that the wind tunnel testing may underestimate the crosswind structural responses for certain lock-in velocity range of vortex shedding. Analyses of peak factors and power spectral density for acceleration response shows that the crosswind responses are a combination of gust-induced buffeting and vortex-induced vibrations in the certain range of wind directions. The identified modal frequencies and mode shapes from acceleration data are found to be in good agreement with existing experimental results and the prediction from the finite element model. The damping ratios increase with amplitude of vibration or equivalently wind velocity which may be attributed to aerodynamic damping. In addition, the natural frequencies determined from the measured displacement are very close to those determined from the acceleration data for the first two modes. Finally, the relation between displacement responses and wind speed/direction was investigated.

• 대한전기학회논문지
• /
• 제41권8호
• /
• pp.858-868
• /
• 1992

0.085Ba(LaS11/2TNbS11/2T)OS13T-0.915Pb(ZrS1yTTiS11-yT)OS13T (0.45$\leq$y$\leq$0.65) transparent electrooptic ceramics were fabricated by two-stage sintering method. The structural, ferroelectric and electrooptic properties were investigated varying composition and second sintering time. Also the possibility of application to electrooptic device was studied. If we increase the PbZrOS13T contents, dielectric constants were increased and Curie temperature was decreased. In the composition of 0.55[mol] PbZrOS13T, electromechanical coupling factor and piezoelectric charge constant were the highest values of 43[%] and 173x10S0-12T[C/N], respectively. Mechanical quality factors were decreased with the increasing PbZrOS13T contents. Light transmittance was increased with wavelength when measured from 300[nm] to 900[nm], and with PbZrOS13T contents in the range of 0.50[mol]-0.65[mol], and had the highest value of 67[%] in the composition of 0.65[mol] PbZrOS13T. From the results of ferroelectric hysteresis loop and transmitted light intensity with electric field, the specimens with compositions of 0.65,0.60,0.55[mol] PbZrOS13T were applicable to electrooptic memory device and those with compositions of 0.50,0.45[mol] PbZrOS13T were applicable to linear electrooptic device.

• 환경생물
• /
• 제39권1호
• /
• pp.81-87
• /
• 2021

2008년 4월부터 2009년 3월까지 1년간 우리나라 서남해안 함평만의 도리포에서는 조간대의 해조류 식물 군집과 가입리에서는 식용 해조류 가시파래의 월별 변동성을 매월 조사하였다. 조사된 해조류는 총 22종이었으며, 녹조류 5종, 갈조류 4종 그리고 홍조류 13종이었다. 함평만 도리포 암반 조간대에서 연간 우점하는 해조류는 구멍갈파래였고, 준 우점종은 잎파래와 애기가시덤불이었다. 조간대 상부에서 하부에 이르는 수직분포는 잎파래 - 애기가시덤불 - 구멍갈파래 - 지충이었다. 가시파래의 생물량은 6월에 최대를 보였고 11월에 최소를 보였으며, 2.4-98.2 g dry wt. m^-2 범위를 나타냈다. 가시파래의 생물량은 수온과 연관이 있어 보이지만 영양염류 및 빛의 강도 같은 기타 환경요인과의 관계는 추후 지속적인 연구가 요구된다.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• 제2권1호
• /
• pp.1-14
• /
• 2021

The study has been carried out with an objective to prepare Siberian roe deer habitat potential maps in South Korea based on three geographic information system-based models including frequency ratio (FR) as a bivariate statistical approach as well as convolutional neural network (CNN) and long short-term memory (LSTM) as machine learning algorithms. According to field observations, 741 locations were reported as roe deer's habitat preferences. The dataset were divided with a proportion of 70:30 for constructing models and validation purposes. Through FR model, a total of 10 influential factors were opted for the modelling process, namely altitude, valley depth, slope height, topographic position index (TPI), topographic wetness index (TWI), normalized difference water index, drainage density, road density, radar intensity, and morphological feature. The results of variable importance analysis determined that TPI, TWI, altitude and valley depth have higher impact on predicting. Furthermore, the area under the receiver operating characteristic (ROC) curve was applied to assess the prediction accuracies of three models. The results showed that all the models almost have similar performances, but LSTM model had relatively higher prediction ability in comparison to FR and CNN models with the accuracy of 76% and 73% during the training and validation process. The obtained map of LSTM model was categorized into five classes of potentiality including very low, low, moderate, high and very high with proportions of 19.70%, 19.81%, 19.31%, 19.86%, and 21.31%, respectively. The resultant potential maps may be valuable to monitor and preserve the Siberian roe deer habitats.

• 한국환경과학회지
• /
• 제33권4호
• /
• pp.279-282
• /
• 2024

This study aimed to verify the results of emotional analysis with respect to canine behavior as reported in the existing animal behavior field based on the dog vestibular emotional reflex (VER) principle, and to evaluate humans and animals based on empathy gained through true communication rather than human-centered interpretation. A total of 200 canines were divided into non-daily and daily situation groups (n=100 each). To assess the psychological and emotional state of each group, these changes were applied to the principle of VER, and six measurement values were selected: positive emotion (balance and energy), negative emotion (tension/anxiety and stress), and body condition (inhibition and neuroticism). The results showed a statistically significant difference (p<0.05) in positive emotions, negative emotions, and body conditions between the two groups. In addition, balance, energy, tension/anxiety, inhibition, and neuroticism were higher in the non-daily situation group than in the daily situation group, with an exception for stress. Compared with the canine daily situation groups, canine in the non-daily situation groups instinctively observed their surroundings to cope with possible threats, had decreased concentration, and elevated vitals due to high-intensity anxiety. This can be perceived as a state of immediate reaction to possible situations/threats. In conclusion, it was confirmed through Vibra Image technology that canine instability mainly affects three factors: positive emotion, negative emotion, and physical condition.