• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.792-795
• /
• 2002

Nowadays the corporations related to Information & Communication field are researching more and more on VoiceXML development. VoiceXML can provide users with more efficient interface, VUI(VoiceXML User Interface) in web environment than the existing one. But more research and development for designing the Dialog have to be done for VUI to be used in efficient way. That was a main topic in "2002 VoiceXML Conference & Expo". According to the importance this paper presents VoiceXML Dialog designed for the purpose of its efficient use and the experimental result.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.2 s.17
• /
• pp.5-12
• /
• 2004

The erosion wear of gun barrel occurs due to heat and chemical reactions. The high pressure and temperature in chamber increase the erosion wear. It is known that the metal phase transfer is the primary wear factor in a gun barrel under high temperature. In this paper, the tool of wear prediction in high pressure gun tube has been developed. The program developed has three modules such as DIRECT(interior ballistics analysis module), INVERSE(gun design module), and WEAR(wear prediction module). The prediction of wear was compared with the experimental data which was collected in the field unit. The prediction results shows good trend with the collected data.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.8
• /
• pp.375-381
• /
• 2002

A rigorous analysis of a broad wall slot array is presented. The slot is longitudinal and offset from the center line in the rectangular waveguide. Pertinent integral equations are developed, taking into account finite wall thickness. The mothed of moment with entire basis function is used to solve a pair of coupled-integral equations, derived from the electromagnetic boundary conditions using modified Green's function, to find the tangential electric field on the upper and lower surfaces of the slot. Numerical results for resonant length and scattering parameters of the slots are Presented over a range of offset. Computed results are compared with experimental result.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.241-243
• /
• 1999

This paper describes a series of experiments investigating the operational characteristics of high-Tc superconducting synchronous motor of five to six hundred watts capacity. In this experiment, ac 220V stator phase voltage and DC 4A excitation current are used, and the synchronous speed runs at 1800rpm. Hall Sensors are installed on the pole face and at the side of the Ag/Bi-2223 high-Tc superconducting tape in order to analyze the effect of the time-varying magnetic field on the motor performance when the load changes its value. The experimental observations are compared with the theoretical predictions.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.67-68
• /
• 2019

The mechanical and durability characteristics of concrete structures depend on the construction environment, material conditions, design conditions, and temperature and humidity environment after casting. However, wired communicati-on sensors which are mainly used in the field have many limitations in their usability and monitoring. In this study, all temperature and humidity data measured from embedded sensors are monitored via a wireless sensor network. Based on the measured temperature data, the predicted compressive strength of the concrete was compared with the actual compressive strength. As a result, The error between predicted strength and experimental strength has decreased over time.

• Wind and Structures
• /
• v.6 no.1
• /
• pp.41-52
• /
• 2003

Rain-wind induced vibrations of cables are a challenging problem in the design of cable-stayed bridges. The precise excitation mechanism of the complex interaction between structure, wind and rain is still unknown. A theoretical model that is able to accurately simulate the observed phenomena is not available. This paper presents a mathematical model describing rain-wind induced vibrations as movement-induced vibrations using the quasi-steady strip theory. Both, the vibrations of the cable and the movement of the water rivulet on the cable surface can be described by the model including all geometrical and physical nonlinearities. The analysis using the stability and bifurcation theory shows that the model is capable of simulating the basic phenomena of the vibrations, such as dependence of wind velocity and cable damping. The results agree well with field data and wind tunnel tests. An extensive experimental study is currently performed to calibrate the parameters of the model.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.5
• /
• pp.687-693
• /
• 2000

Recently, a scroll compressor is widely used, because a scroll compressor features low noise, due to less pulsation of gas pressure, than that of the rotary compressor. The major source of noise in air-conditioner is a compressor. Therefore, noise reduction in a compressor is quite significant as an element technology in air-conditioner field. For a reduction of noise, the source of noise must be identified. This paper presents detailed analyzes for the major noise source (fluid-borne noise and structure-borne noise) causes in a scroll compressor, which will make possible a low noise and vibration design of a scroll compressor.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.2023-2028
• /
• 2004

The effects of nozzle-lip thickness on the relationship between screech tone and broadband shock-associated noise were experimentally investigated using a convergent-divergent nozzle with a design Mach number of 2.0. Overall sound pressure levels (OASPL) and noise spectra were obtained at far-field locations. Schlieren optical system was used to visualize the flow-fields of supersonic jets. A baffle plate was installed at the exit of the nozzle and its size was varied to obtain different nozzle-lip thicknesses. Experiment was carried out over a wide range of nozzle pressure ratios from 2.0 and 18.0, which corresponds to over- and under-expanded conditions. The results obtained clearly show that the screech tones are influenced by the nozzle-lip thickness. It is found that the screech tone and its peak amplitude are strongly dependent on whether the jet is over-expanded and under-expanded at the nozzle exit.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.3
• /
• pp.330-336
• /
• 1989

In analyzing the axisymmetric backward extrusion process a new method of analysis using upper-bound theorem is proposed in which the plastic zone and dead metal zone cam be predicted. Experiments are carried out with commercial aluminum. The metal flow on the meridional plane has been visualized experimentally by using the gridded specimens. It is shown that the theoretical results both in extrusion load and deformation pattern are in good agreement with the experimental results and they can be used for effective punch and die design to consider various process parameters in axisymmetric backward extrusion.

• Journal of Environmental Science International
• /
• v.25 no.5
• /
• pp.745-748
• /
• 2016

Ninety ducks (one-day-old Pekins, 45 males and 45 females) were used to evaluate the effects of supplementing diets with Houttuynia cordata powder on the fatty acid profiles of duck breast meat. The ducks were allotted to one of the three treatment diets using a completely randomized design, each treatment-group containing three replicate pens with ten birds each (five of each gender). The experimental diets were: 1) Control (basal diet), 2) T1 (Control+ 1% Houttuynia cordata) and 3) T2 (Control+2% Houttuynia cordata). In spite of significant difference, the addition of Houttuynia cordata resulted in higher unsaturated fatty acid and lower saturated fatty acid contents than in the Control group. However, no remarkable difference was observed between 1% and 2 % Houttuynia cordata groups for fatty acid profiles.