• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.1
• /
• pp.284-295
• /
• 2012

The purpose of this study was to develop and evaluate patient safety reporting promoting strategy for nurses to improve nursing care quality. The process included three phase - construction, implementation and evaluation phase. Before the construction phase has two kinds of subcategories as analysis and verification. Analysis phase was consisted of literature review and field study, and verification was conducted by two specialist. At the construction phase, patient safety reporting system, educational materials, planning for public relation, and reward preparation were developed. After implementation during 12 weeks, we evaluated pre-post scores of satisfaction, stress of conscience, job performances. The participants were 51 nurses working for a hospitals. The program was developed and then administered to the experimental group for 12 weeks. One group pretest-posttest design was used for this study. Data were analyzed using descriptive analysis, paired t-test with the SPSS WIN 18.0 program. After the intervention, job performance scores improved significantly from 3.62 to 3.75(t=2.653, p=.009). But job stress didn't changed significantly(t=.785, p=.434). These strategy can be applied to many clinical setting that will be helpful to promote patient safety reporting for nurses.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.6
• /
• pp.163-170
• /
• 2012

With the advantage of a rapid exothermic reaction property, jet set concrete may be used as a cold weather concrete because it can reach the required strength before being damaged by cold weathers. And it can be hardened more quickly if the field temperature is properly compensated by heating. Because ordinary concrete cannot be hardened well under sub-zero temperatures, anti-freeze agents are typically added to prevent the frost damage and to ensure the proper hardening of concrete. While the addition of a large amount of anti-freeze agent is effective to prevent concrete from freezing and accelerates cement hydration resulting in shortening the setting time and enhancing the initial strength, it induces problems in long-term strength growth. Also, it is not economically feasible because most anti-freeze agents are mainly composed of chlorides. Recent studies reported that magnesia-phosphate composites can be hardened very quickly and hydrated even in low temperatures, which can be used as an alternative of cold weather concrete for cold weathers and very cold places. As a preliminary study, to obtain the material properties, mortar specimens with different mixture proportions of magnesia-phosphate composites were manufactured and series of experiments were conducted varying the curing temperature. From the experimental results, an appropriate mixture design for cold weathers and very cold places is suggested.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.7
• /
• pp.1029-1035
• /
• 2005

A 3${\times}$4 factorial field experiment with a complete randomised split-plot design with four replicates was conducted from June 2002 to March 2003 at the experimental farm of the Nong Lam University, Ho Chi Minh City, Vietnam, to determine effects of different harvesting heights (10, 30 and 50 cm above the ground) and cutting intervals (45, 60, 90 and 285 days) on yield of foliage and tubers, and chemical composition of the foliage. Cassava of the variety KM 94 grown in plots of 5 m${\times}$10 m at a planting distance of 30 cm${\times}$50 cm was hand-harvested according to respective treatments, starting 105 days after planting. Foliage from the control treatment (285 days) and all tubers were only harvested at the final harvest 285 days after planting. Dry matter and crude protein foliage yields increased in all treatments compared to the control. Mean foliage dry matter (DM) and crude protein (CP) yields were 4.57, 3.53, 2.49, and 0.64 tonnes DM $ha^{-1}$ and 939, 684, 495 and 123 kg CP $ha^{-1}$ with 45, 60, 90 and 285 day cutting intervals, respectively. At harvesting heights of 10, 30 and 50 cm the DM yields were 4.27, 3.67 and 2.65 tonnes $ha^{-1}$ and the CP yields were 810, 745 and 564 kg $ha^{-1}$, respectively. The leaf DM proportion was high, ranging from 47 to 65%. The proportion of leaf and petiole increased and the stem decreased with increasing harvesting heights and decreasing cutting intervals. Crude protein content in cassava foliage ranged from 17.7 to 22.6% and was affected by harvesting height and cutting interval. The ADF and NDF contents of foliage varied between 22.6 and 30.2%, and 34.2 and 41.2% of DM, respectively. The fresh tuber yield in the control treatment was 34.5 tonnes $ha^{-1}$. Cutting interval and harvesting height had significant negative effects on tuber yield. The most extreme effect was for the frequent foliage harvesting at 10 cm harvesting height, which reduced the tuber yield by 72%, while the 90 day cutting intervals and 50 cm harvesting height only reduced the yield by 7%. The mean fresh tuber yield decreased by 56, 45 and 27% in total when the foliage was harvested at 45, 60 and 90 day cutting intervals, respectively. It is concluded that the clear effects on quantity and quality of foliage and the effect on tuber yield allow alternative foliage harvesting principles depending on the need of fodder for animals, value of tubers and harvesting cost. An initial foliage harvest 105 days after planting and later harvests with 90 days intervals at 50 cm harvesting height increased the foliage DM and CP yield threefold, but showed only marginal negative effect on tuber yield.

• Journal of Astronomy and Space Sciences
• /
• v.13 no.2
• /
• pp.173-180
• /
• 1996

This paper briefly describes the KITSAT-1 and KITSAT-2 spacecrafts and presents the functions, calibration procedures and in-orbit results of the KITSAT-2 analog sun sensors have been flown as an experimental payload for the future mission. We have two constraints in their design: small size and very low power consumption due to the tight mass and power budget of the spacecraft. Two one-dimensional analog sun sensors are mounted on the top facet of the KITSAT-2 spaceraft. Each has $\pm$60 degrees of view angle and they cover 210 degree field of view in total as the 30 degree view angles are overlapped. Only the relative sun angle around the Z-axis (yaw-axis) and the spin rate of the spacecraft can be achieved as the one dimensional sun sensors are used and they are aligned with the Z-axis. The calibration formulae are obtained using the fifth order line fitting algorithm for each sun sensor on the ground and they are applied to the obtained in-orbit data. ASS-1 with silicon solar cells has maximum error of 1.5 degree and ASS-2 with silicon photocells manufactured at KAIST has maximum error of 0.5 degree except near 0 degree of sun ray incident anagle where random reflection of incident sun ray is maximum in orbit. The results are presented in chapter 4. The performance of each sun sensor and the possible mounting errors are stated in chapter 5.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.14 no.3
• /
• pp.247-256
• /
• 1994

This experiment was carried out to determine harvesting date and cultivar effects on growth characteristics, forage yield and quality of spring sown oats(Avena surivu L.) at the forage experimental field, College of Agricultural and Life Sciences, Swul National University, Suwwn from March 22 to June 20, 1993. The experiment was arranged in a split plot design with three replications. The main plots consisted of the harvesting dates such as early(24 May), mid(8 June) and late(20 June). The subplots consisted of different maturities of oat cultivm such as Speed oat, Cayuse, Foothill, Sv841034 and Magnum.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.434-435
• /
• 2012

Plasma enhanced chemical vapor deposition (PECVD) silicon dioxide thin films have many applications in semiconductor manufacturing such as inter-level dielectric and gate dielectric metal oxide semiconductor field effect transistors (MOSFETs). Fundamental chemical reaction for the formation of SiO2 includes SiH4 and O2, but mixture of SiH4 and N2O is preferable because of lower hydrogen concentration in the deposited film [1]. It is also known that binding energy of N-N is higher than that of N-O, so the particle generation by molecular reaction can be reduced by reducing reactive nitrogen during the deposition process. However, nitrous oxide (N2O) gives rise to nitric oxide (NO) on reaction with oxygen atoms, which in turn reacts with ozone. NO became a greenhouse gas which is naturally occurred regulating of stratospheric ozone. In fact, it takes global warming effect about 300 times higher than carbon dioxide (CO2). Industries regard that N2O is inevitable for their device fabrication; however, it is worthwhile to develop a marginable nitrous oxide free process for university lab classes considering educational and environmental purpose. In this paper, we developed environmental friendly and material cost efficient SiO2 deposition process by substituting N2O with O2 targeting university hands-on laboratory course. Experiment was performed by two level statistical design of experiment (DOE) with three process parameters including RF power, susceptor temperature, and oxygen gas flow. Responses of interests to optimize the process were deposition rate, film uniformity, surface roughness, and electrical dielectric property. We observed some power like particle formation on wafer in some experiment, and we postulate that the thermal and electrical energy to dissociate gas molecule was relatively lower than other runs. However, we were able to find a marginable process region with less than 3% uniformity requirement in our process optimization goal. Surface roughness measured by atomic force microscopy (AFM) presented some evidence of the agglomeration of silane related particles, and the result was still satisfactory for the purpose of this research. This newly developed SiO2 deposition process is currently under verification with repeated experimental run on 4 inches wafer, and it will be adopted to Semiconductor Material and Process course offered in the Department of Electronic Engineering at Myongji University from spring semester in 2012.

• Journal of Korean society of Dental Hygiene
• /
• v.10 no.6
• /
• pp.991-1000
• /
• 2010

Objectives : The purpose of this study was to analyze 356 papers included in the Journal of the Korean Society of Dental Hygiene between 2000 when the initial number was issued and April, 2010. The papers involved articles, treatises, theses and dissertations. Methods : According to existing literature related to paper analysis, all the journals were analyzed by year to find out the subjects of the studies, places for data gathering, the presence or absence of research funds supplied, the number of researchers, research methods, methods of data collection, themes and data analysis methods. Results : As for subjects, the largest group of the papers that numbered 69(20.7%) examined dental hygienists, and the second biggest group that numbered 65(19.5%) examined dental hygienists and students. The third greatest group that numbered 47(14.2%) examined patients at dental hospitals and clinics. Concerning places of data gathering, schools(37.1%) were the most common places where data were collected, followed by dental hospitals/clinics(31.6%) and laboratories(7.4%). In terms of research design, research studies accounted for 88.5%, and experimental studies accounted for 11.5%. Research studies were far more prevalent. Concerning themes, there were 76 kinds of concepts that the studies dealt with, and the most dominant concepts were oral health awareness and behavior, which 34 studies focused on(9.6%). 10 studies or more were concerned with dental service, oral health status, dental hygiene education, infection control, oral health education, job satisfaction and stress. As to data analysis methods, frequency analysis was most dominant, followed by Chi-square test, t-test, analysis of variance, descriptive statistics, correlation analysis and regression analysis. Most of the studies made use of quantitative research methods. Conclusions : The effort by this study to analyze the papers included in the Journal of the Korean Society of Dental Hygiene to grasp research trends in the field of dental hygiene is expected to be of some use for the determination of the right directions of dental hygiene research in the future.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.16 no.4
• /
• pp.327-337
• /
• 1996

A field experiment was conducted at SNU Experimental Livestock Farm, Suweon in 1995 to determine effect of planting date on forage performance of wm hybrids of four different maturity groups. A split-plot design replicated three times was used, with com hybrids representing four maturity groups (115, 118, 121 and 125 days) being the main plots and planting dates (3124, 415, 415, 425, 515 and 5/15) the sub-plots. 1. Days to emergence and percent emergence from the March 24 planting were, on the average, 36 days and 58%, respectively, but those from the April 5 to May 15 planting averaged 12 days and 92%, respectively. 2. Plant and ear heights increased gradually as the dates of planting were delayed except the May 15 planting, however, percent ear was decreased as the dates of planting were delayed. There was a trend for the mean lodging percentage of the hybrids to be higher as the planting date was delayed. 3. The 115-and 118-day mediumearly maturing hybrids harvested on August 18 produced silages with a dry matter content between 27 and 30% at all planting dates except the May 15 planting, while the 121-and 125-day medium-late maturing hybrids produced silages with a dry matter wntent less than 27% regardless of any planting dates. 4. There were no significant differences in mean dry matter yield among the hybrids, but significant mean TDN yield differences were found. The 115-, 118- and 125-day hybrids had significantly higher mean TDN yield than the 121-day hybrid. There were significant differences in mean dry matter and TDN yields among the planting dates. The mean dry matter and TDN yields from the April 5, 15 and 25 plantings were significantly higher than those of other plantings, however, there were no significant differences in mean TDN yield among the April 5, April 15 and April 25 plantings. No significant planting date $\times$ maturity interactions were found for both the dry matter and TDN yields. 5. Mean stover NDF and ADF contents of the 115- and 118day hybrids were higher than those of the 121- and 125-day hybrids, but the reverse was true for mean stover IVDMD and RFV. Mean stover NDF an ADF contents increased with earlier plantings, but mean stover IVDMD and RFV increased when planting was delayed. Results of this experiment indicate that for corn planting in central and northern areas of Korea, early to mid-April may be the right time with the 115-to 118-day maturity hybrids when silage making before August 20 is taken into consideration.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.2
• /
• pp.177-182
• /
• 2004

This experiment was conducted to compare the agronomic characteristics and productivity inintroduced vetch cultivar at the experimental field of Grassland and Forage Crops Division, National Livestock Research Institute from 1999 to 2000. The experiment was arranged in a randomized block design with three replications. The vetch cultivar used in this study were 8 cultivar(Haymaker plus, Common, Capello, Namoi, Victa, Aneto, Popany, Korean milk vetch). Namoi, Victa and Aneto cultivar were died during winter. The cultivar having the fastest flowering date was Korean milk vetch while the flowering date of Common was the latest as 22th May. The average dry matter(DM) content was 14.7% and crude protein(CP) content was 20.9%. Common showed the highest CP content by 23.1% and Korean milk vetch showed the lowest content by 18.0%. Average acid detergent fiber(ADF) and neutral detergent fiber(NDF) content were 33.5 and 42.5% respectively. All cultivar showed the first grade of RFV(relative feed value). The productivity of vetch cultivar were severely different according to the winter hardness. Common showed the highest DM yield by 8,664kg/ha, but the DM yield of Capello and Popany were low by 3,004 and 2,114kg/ha, respectively. The yield of CP and TDN(total digestible nutrient) also was high at Common. The results of this experiments indicated that the productivity of vetch cultivar was effected greatly depending on winter hardness, therefore it was thought winter hardness is the main factor for introducing vetch cultivar.

• Publications of The Korean Astronomical Society
• /
• v.27 no.5
• /
• pp.419-429
• /
• 2012

In this paper, we propose a new re-quantization method after FFT processing to prevent the distortion of correlation result of VCS (VLBI Correlation Subsystem). The re-quantization is used to rearrange the data bit so as to reduce the data rate processed as 16-bit of FFT result of VCS. Having done this procedure, we found that the distorted spectrum of correlation result occurred in the delay tracking experiments by the re-quantization method introduced for initial design of VCS. In order to solve this, two kinds of re-quantization method, that is, the comparison and selection-type, are proposed. The first is to re-quantize the FFT result as a valid-bit by comparing with the input data after determining the adequate threshold. The second is manually to select the valid-bit of FFT result after finding the valid-field of data according to the bit-distribution of input data. We confirmed that the second is more effective compared with the first through the experimental result, and it will be implemented without so much modification of applied method in the condition of the limited resource of FPGA. The re-quantization is, however, carried out with 4-bit in the proposed second method for FFT result, and then the distortion of correlation result is also appeared. To fix this problem, the bit for re-quantization is extended to 8-bit. The proposed 8-bit selection-type is effectively verified so that the distortion of correlation result disappeared by applying to VCS in consequence of the simulation and correlation experiments.