• 제목/요약/키워드: Field Effect Mobility

검색결과 517건 처리시간 0.027초

Amorphous Indium-Tin-Zinc-Oxide (ITZO) Thin Film Transistors

  • 조광민;이기창;성상윤;김세윤;김정주;이준형;허영우
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2010년도 제39회 하계학술대회 초록집
    • /
    • pp.170-170
    • /
    • 2010
  • Thin-film transistors (TFT) have become the key components of electronic and optoelectronic devices. Most conventional thin-film field-effect transistors in display applications use an amorphous or polycrystal Si:H layer as the channel. This silicon layers are opaque in the visible range and severely restrict the amount of light detected by the observer due to its bandgap energy smaller than the visible light. Therefore, Si:H TFT devices reduce the efficiency of light transmittance and brightness. One method to increase the efficiency is to use the transparent oxides for the channel, electrode, and gate insulator. The development of transparent oxides for the components of thin-film field-effect transistors and the room-temperature fabrication with low voltage operations of the devices can offer the flexibility in designing the devices and contribute to the progress of next generation display technologies based on transparent displays and flexible displays. In this thesis, I report on the dc performance of transparent thin-film transistors using amorphous indium tin zinc oxides for an active layer. $SiO_2$ was employed as the gate dielectric oxide. The amorphous indium tin zinc oxides were deposited by RF magnetron sputtering. The carrier concentration of amorphous indium tin zinc oxides was controlled by oxygen pressure in the sputtering ambient. Devices are realized that display a threshold voltage of 4.17V and an on/off ration of ${\sim}10^9$ operated as an n-type enhancement mode with saturation mobility with $15.8\;cm^2/Vs$. In conclusion, the fabrication and characterization of thin-film transistors using amorphous indium tin zinc oxides for an active layer were reported. The devices were fabricated at room temperature by RF magnetron sputtering. The operation of the devices was an n-type enhancement mode with good saturation characteristics.

  • PDF

폭발물 감지 시스템 개발을 위한 TNT 분자 흡착에 대한 WSe2 소자의 전기적 반응 특성 평가 (Electrical response of tungsten diselenide to the adsorption of trinitrotoluene molecules)

  • 김찬휘;조수연;김형태;이원주;박준홍
    • 한국결정성장학회지
    • /
    • 제33권6호
    • /
    • pp.255-260
    • /
    • 2023
  • 분자 단위의 폭발물질을 탐지하기 위하여, 고감도 응답성 센서의 개발이 요구되고 있다. 2차원 반도체는 얇은 적층형 구조를 가져 전하 캐리어가 축적될 수 있어, 전하 캐리어의 급격한 신호 변조 특성을 기대할 수 있다. WSe2 반도체 소재의 TNT(Trinitrotoluene) 폭발물질에 대한 탐지 효용성을 연구하기 위해, CVD(Chemical Vapor Deposition) 공정을 이용해 WSe2 박막을 합성하여 FET(Field Effect Transistors)을 제작하였다. 라만 분석과 FT-IR(Fourier-transform infrared) 분광 결과는 TNT 분자의 흡착과 WSe2 결정질의 구조적 전이 분석 정보를 나타내었다. 또한, WSe2 표면의 TNT 분자 흡착 전후의 전기적 특성을 비교하였다. TNT 도포 전, WSe2 FET에 백 게이트 바이어스로 -50 V를 인가함에 따라 0.02 μA의 최대 전류 값이 관측되었고, 0.6%(w/v) TNT 용액을 도포하였을 때 Drain 전류는 p-type 거동을 보이면서 0.41 μA의 최대 전류 값을 기록하였다. 이후 On/Of f Ratio 및 캐리어 이동도, 히스테리시스를 추가적으로 평가하였다. 본 연구에서는 WSe2의 TNT 분자에 대한 고감도와 신속한 응답성을 통해 폭발물질 탐지 센서 소재로서의 가능성을 제시하였다.

Hot Wall Epitaxy(HWE)범에 의한 $CuInSe_2$ 단결정 박막 성장과 가전자대 갈라짐에 대한 광전류 연구 (Growth and photocurrent study on the splitting of the valence band for $CuInSe_2$ single crystal thin film by hot wall epitaxy)

  • 홍명석;홍광준
    • 한국결정성장학회지
    • /
    • 제14권6호
    • /
    • pp.244-252
    • /
    • 2004
  • $CuISe_2$ 단결정 박막은 수평 전기로에서 합성한 $CuInSe_2$ 다결정을 증발원으로하여, hot wall epitaxy(HWE) 방법으로 증발원과 기판(반절연성-GaAs(100))의 온도를 각각 $620^{\circ}C$, $410^{\circ}C$로 고정하여 단결정 박막을 성장하였다. 이때 단결정 박막의 결정성은 광발광 스펙트럼과 이중결정 선 요동곡선(DCRC) 으로 부터 구하였다. Hall 효과는 van der Pauw 방법에 의해 측정되었으며, 293K에서 운반자 농도와 이동도는 각각 $9.62\times10^{16}/\textrm{cm}^3$, 296 $\textrm{cm}^2$/Vㆍs 였다. $CuAlSe_2$/Si(Semi-Insulated) GaAs(100) 단결정 박막의 광흡수와 광전류 spectra를 293k에서 10K까지 측정하였다. 광흡수 스펙트럼으로부터 band gap $E_g$(T)는 Varshni 공식에 따라 계산한 결과 1.1851 eV-($8.99\times10^{-4} eV/K)T^2$/(T+153k)였다. 광전류 스펙트럼으로 부터 Hamilton matrix(Hopfield quasicubic mode)법으로 계산한 결과 crystal field splitting Δcr값이 0.0087eV이며 spin-orbit Δso값은 0.2329 eV임을 확인하였다. 10K일 때 광전류 봉우리들은 n = 1일때 $A_1-, B_1$-와 $C_1$-exciton봉우리임을 알았다.

Hot Wall epitaxy(HWE)법에 의한 $CdGa_2Se_4$ 단결정 박막의 성장과 가전자대 갈라짐에 대한 광전류 연구 (Photocurrent study on the splitting of the valence band and growth of $CdGa_2Se_4$ single crystal thin film by hot wall epitaxy)

  • 박창선;홍광준
    • 한국결정성장학회지
    • /
    • 제17권5호
    • /
    • pp.179-186
    • /
    • 2007
  • [ $CdGa_2Se_4$ ] 단결정 박막을 수평 전기로에서 합성한 $CdGa_2Se_4$ 다결정을 증발원으로하여, hot wall epitaxy(HWE) 방법으로 증발원과 기판(반절연성-GaAs(100))의 온도를 각각 $630^{\circ}C,\;420^{\circ}C$로 고정하여 성장하였다. 이때 단결정 박막의 결정성은 광발광 스펙트럼과 이중결정 X-선 요동곡선(DCRC)으로 부터 구하였다. Hall 효과는 van der Pauw 방법에 의해 측정되었으며, 293K에서 운반자 농도와 이동도는 각각 $8.27{\times}10^{17}cm^{-3},\;345cm^2/V{\cdot}s$였다. $CdGa_2Se_4/SI$(Semi-Insulated) GaAs(100) 단결정 박막의 광흡수와 광전류 spectra를 293K에서 10K까지 측정하였다. 광흡수 스펙트럼으로부터 band gap $E_g(T)$는 Varshni 공식에 따라 계산한 결과 $E_g(T)=2.6400eV-(7.721{\times}10^{-4}eV/K)T^2/(T+399K)$였다. 광전류 스펙트럼으로부터 Hamilton matrix(Hopfield quasicubic mode)법으로 계산한 결과 crystal field splitting 에너지 ${\Delta}cr$값이 106.5meV이며 spinorbit 에너지 ${\Delta}so$값은 418.9meV임을 확인하였다. 10K일 때 광전류 세 봉우리들은 $A_{1^-},\;B_{1^-}$$C_{11}-exciton$ 봉우리임을 알았다.

Highly Efficient Multi-Functional Material for Organic Light-Emitting Diodes; Hole Transporting Material, Blue and White Light Emitter

  • Kim, Myoung-Ki;Kwon, Jong-Chul;Hong, Jung-Pyo;Lee, Seong-Hoon;Hong, Jong-In
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권spc8호
    • /
    • pp.2899-2905
    • /
    • 2011
  • We have demonstrated that TPyPA can be used as an efficient multi-functional material for OLEDs; hole transporting material (HTL), blue and white-light emitter. The device based on TPyPA as the HTL exhibited an external quantum efficiency of 1.7% and a luminance efficiency of 4.2 cd/A; these values are 40% higher than the external quantum efficiency and luminance efficiency of the NPD-based reference device. The device based on TPyPA as a blue-light emitter exhibited an external quantum efficiency of 4.2% and a luminance efficiency of 5.3 $cdA^{-1}$ with CIE coordinates at (0.16, 0.14), the device based on TPyPA as a white-light emitter exhibited an external quantum efficiency of 3.2% and a luminance efficiency of 7.7 $cdA^{-1}$ with CIE coordinates at (0.33, 0.39). Also, TPyPA-based organic solar cell (OSC) exhibited a maximum power conversion efficiency of 0.35%. TPyPA-based organic thin-film transistors (OTFTs) exhibited highly efficient field-effect mobility (${\mu}_{FET}$) of $1.7{\times}10^{-4}cm^2V^{-1}s^{-1}$, a threshold voltage ($V_{th}$) of -15.9 V, and an on/off current ratio of $8.6{\times}10^3$.

Effects of Mg Suppressor Layer on the InZnSnO Thin-Film Transistors

  • Song, Chang-Woo;Kim, Kyung-Hyun;Yang, Ji-Woong;Kim, Dae-Hwan;Choi, Yong-Jin;Hong, Chan-Hwa;Shin, Jae-Heon;Kwon, Hyuck-In;Song, Sang-Hun;Cheong, Woo-Seok
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제16권2호
    • /
    • pp.198-203
    • /
    • 2016
  • We investigate the effects of magnesium (Mg) suppressor layer on the electrical performances and stabilities of amorphous indium-zinc-tin-oxide (a-ITZO) thin-film transistors (TFTs). Compared to the ITZO TFT without a Mg suppressor layer, the ITZO:Mg TFT exhibits slightly smaller field-effect mobility and much reduced subthreshold slope. The ITZO:Mg TFT shows improved electrical stabilities compared to the ITZO TFT under both positive-bias and negative-bias-illumination stresses. From the X-ray photoelectron spectroscopy O1s spectra with fitted curves for ITZO and ITZO:Mg films, we observe that Mg doping contributes to an enhancement of the oxygen bond without oxygen vacancy and a reduction of the oxygen bonds with oxygen vacancies. This result shows that the Mg can be an effective suppressor in a-ITZO TFTs.

Investigating InSnZnO as an Active Layer for Non-volatile Memory Devices and Increasing Memory Window by Utilizing Silicon-rich SiOx for Charge Storage Layer

  • Park, Heejun;Nguyen, Cam Phu Thi;Raja, Jayapal;Jang, Kyungsoo;Jung, Junhee;Yi, Junsin
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
    • /
    • pp.324-326
    • /
    • 2016
  • In this study, we have investigated indium tin zinc oxide (ITZO) as an active channel for non-volatile memory (NVM) devices. The electrical and memory characteristics of NVM devices using multi-stack gate insulator SiO2/SiOx/SiOxNy (OOxOy) with Si-rich SiOx for charge storage layer were also reported. The transmittance of ITZO films reached over 85%. Besides, ITZO-based NVM devices showed good electrical properties such as high field effect mobility of 25.8 cm2/V.s, low threshold voltage of 0.75 V, low subthreshold slope of 0.23 V/dec and high on-off current ratio of $1.25{\times}107$. The transmission Fourier Transform Infrared spectroscopy of SiOx charge storage layer with the richest silicon content showed an assignment at peaks around 2000-2300 cm-1. It indicates that many silicon phases and defect sources exist in the matrix of the SiOx films. In addition, the characteristics of NVM device showed a retention exceeding 97% of threshold voltage shift after 104 s and greater than 94% after 10 years with low operating voltage of +11 V at only 1 ms programming duration time. Therefore, the NVM fabricated by high transparent ITZO active layer and OOxOy memory stack has been applied for the flexible memory system.

  • PDF

In-Ga-O 박막에서 Gallium 조성 변화에 의한 박막의 특성변화 연구 및 소자 응용

  • 조광민;이준형;김정주;허영우
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
    • /
    • pp.169.1-169.1
    • /
    • 2015
  • 최근 디스플레이 기술은 급속도로 발전해 가고 있다. 디스플레이 산업의 눈부신 성장에 발맞추어 초고화질, 초고선명, 고속 구동 및 대형화 등을 포함하는 최신 기술의 디스플레이 구동이 필요하다. 이러한 요구사항을 만족하기 위해서는 각 픽셀에 영상정보를 기입하는 충전시간을 급격히 감소시켜야 하고 따라서 픽셀 트랜지스터(TFT)의 이동도는 급격히 증가해야 한다. 따라서 차세대 디스플레이 실현을 위해서 고이동도 특성을 구현 할 수 있는 신물질의 개발이 매우 중요하다. 현재 산화물박막트랜지스터는 차세대 디스플레이 실현을 위해 가장 주목받고 있으며, 실제로 산화물박막 트랜지스터의 핵심소재인 In-Ga-Zn-O(a-IGZO) 산화물의 경우 국내외에서 디스플레이에 적용되어 생산이 시작되고있다. 그러나 a-IGZO 산화물의 경우 이동도가 $5-10cm^2V{\cdot}s$ 수준이어서 향후 개발 되어질 초고해상도/고속구동 디스플레이 실현(이동도 $50cm^2V{\cdot}s$)에는 한계가 있다. 따라서 본 연구에서는 이를 해결 할 수 있는 'post-IGZO' 개발을 위해 In2O3에 Ga2O3를 조성별로 고용시켜 박막의 구조적, 전기적, 광학적 특성 및 TFT를 제작하여 특성 연구를 진행하였다. 조성은 In2O3에 Ga2O3를 7.5%~15% 도핑 하였으며, Sputtering을 이용하여 indium gallium oxide(IGO) 박막을 제작하였다. 박막은 상온 및 $300^{\circ}C$에서 증착 하였으며 증착 된 IGO 박막은 Ga=12.5% 까지는 In2O3에 Ga이 모두 고용되어 cubic In2O3 poly crystalline을 나타내는 것을 확인하였으며 Ga=15%에서 Gallium 관련 2차상이 확인되었다. Ga양이 변화함에 따라 박막의 전기적 특성이 조절 가능하였으며 이를 이용하여 IGO 박막을 30 nm 두께로 증착 하여 IGO 박막을 channel layer로 사용하는 bottom gate structured TFTs를 제작 하였다. IGO TFTs는 Ga=10%에서 on/off ratio ${\sim}10^8$, 그리고 field-effect mobility $84.8cm^2/V{\cdot}S$를 나타내며 초고화질, 초고선명 차세대 디스플레이 적용 가능성을 보여 준다.

  • PDF

Ku 대역용 주파수변환기의 구현 (Implementation of Down Converter for Ku-Band Application)

  • 정동근;김상태;하천수
    • 한국정보통신학회논문지
    • /
    • 제4권3호
    • /
    • pp.527-536
    • /
    • 2000
  • 본 논문에서는 마이크로파용의 전계효과 트랜지스터를 사용한 저잡음 주파수 변환기의 설계에 대하여 논의한다. 높은 안정도의 유전체공진기를 사용하였고 중간주파수단에서 불필요한 발진을 막기위해 대역통과 여파기를 사용하였다. 공진 주파수가 12.3GHz인 마이크로스트립 안테나를 믹서와 함께 동일한 기판 위에 집적시켰으며 고전자 이동 트랜지스터 3개를 사용한 저잡음 증폭기를 안테나 뒤에 부가하였다. 국부발진기의 출력주파수는 Ku 대역용으로서 11.3GHz로 하였다. 측정결과 12.0GHz에서 12.7GHz에 걸쳐 약 7~12dB의 이득을 보였으며, 중간주파수단에서의 잡음지수는 6dB이었다. 설계된 모델은 다이오드형 믹서에 비해 변환손실이 적었으며, 디지털 방송 및 통신시스템에 적용될 수 있을 것이다.

  • PDF

Bottom Gate IGZO 박막트랜지스터를 이용한 투명 AMOLED 패널 제작 (AMOLED Panel Using Transparent Bottom Gate IGZO TFT)

  • 조두희;양신혁;변춘원;신재헌;이정익;박은숙;권오상;황치선;추혜용;조경익
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 춘계학술대회 및 기술 세미나 논문집 디스플레이 광소자
    • /
    • pp.39-40
    • /
    • 2008
  • We have examined post-annealing and passivation for the transparent bottom gate IGZO TFT having an inverse co-planar structure. The oxygen-vacuum two step annealing enhanced the field effect mobility up to 18 $cm^2$/Vsandthesub-threshold swing down to 0.2V/dec. However, the hysterysis and the bias stability problems could not be solved just by post-annealing. Thus, we have passivated the bottom gate IGZO TFTs with organic and inorganic materials. $Ga_2O_3$, $Al_2O_3$, $SiO_2$ and some polymer materials were effective materials for passivations. The hysterysis and the stability of the TFTs were remarkably improved by the passivations. We have manufactured the AMOLED panel with the transparent bottom gate IGZO TFT array successfully.

  • PDF