• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.23-29
• /
• 2009

A sand-cone method is commonly used to determine the density of the compacted soils. This method uses a calibration container to determine the bulk-density of the sand for use in the test. The density of the test or compacted soil is computed on the assumption that the calibration container has approximately the same size or volume and allows the sand to fall approximately the same height as a test hole in the field. However, in most cases the size or shape of test hole is not exactly the same as the calibration container. There is certain discrepancy between sand particle settlement or arrangement in the laboratory calibration and in the field testing, which may cause an erroneous determination of in-situ density. The sand filling process is simulated in the laboratory and its effect on the determination of density is investigated. Artificially-made holes with different heights and bottom shapes are prepared to simulate various shapes of the test hole in the field. The sands with different gradations are used in the testing to examine how sand grain size influences the determination of density in the field.

• 한국지반신소재학회논문집
• /
• 제16권1호
• /
• pp.9-17
• /
• 2017

본 연구에서는 암성토의 토공량 설계에 대한 대책방안으로 현장밀도시험을 수행하였으며, 현장밀도시험결과 암성토부의 발파암 평균 체적환산계수는 1.001로서 풍화암의 체적환산계수 1.1보다 작은 값이 나타났다. 이와 같이 암성토의 경우 여러 가지 현상에 의해 토공량의 증감 원인을 제공하고 있으나, 이에 대한 조사 및 시험방법 등 구체적인 기술 등이 부족한 실정이므로 본 연구결과에서와 같이 체적환산계수를 검토하기 위한 조사방법으로 현장밀도시험방법이 매우 유용한 방법임을 확인하였다.

• 한국도로학회논문집
• /
• 제17권1호
• /
• pp.51-58
• /
• 2015

PURPOSES : The objective of this study is to compare the densities of asphalt pavements measured both in the field and in the laboratory, and also to evaluate the applicability of field density measuring equipment, such as the pavement quality indicator (PQI), by using statistical analysis. METHODS : For the statistical analysis of the density measured from asphalt pavement, student t-tests and a coefficient of correlation are investigated. In order to compare the measured densities, two test sections are prepared, with a base layer and an intermediate layer constructed. Each test section consists of 9 smaller sections. During construction, the field densities are measured for both layers (base and intermediate) in each section. Core samples are extracted from similar regions in each section, and moved to the laboratory for density measurements. All the measured densities from both the field and laboratory observations are analyzed using the selected statistical analysis methods. RESULTS AND CONCLUSION : Based on an analysis of measured densities, analysis using a correlation coefficient is found to be more accurate than analysis using a student t-test. The correlation coefficient (R) between the field density and the core density is found to be very low with a confidence interval less than 0.5. This may be the result of inappropriate calibration of the measuring equipment. Additionally, the correlation coefficient for the base layer is higher than for the intermediate layer. Finally, we observe that prior to using the density measuring equipment in the field, a calibration process should be performed to ensure the reliability of measured field densities.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.352-359
• /
• 2005

In this study, seismic refraction survey and MASW at dam crest and down-hole test and cross hole test in the boring holes located in dam crest through the core are performed to fin out dynamic material properties, are needed to evaluate dynamic safety of rockfill dam using dynamic analysis method. From the field test and geophysical exploration, applied such as above, p-wave and s-wave velocity profile of each layer of dam body. Dynamic material properties, such as elastic modulus, shear modulus, poissong's ration, are obtained from p-wave and s-wave velocity profile and density profile from formation density logging test.

• 한국지반신소재학회논문집
• /
• 제14권4호
• /
• pp.45-58
• /
• 2015

국내에서의 도로 하부지반의 품질 관리는 주로 하중 지지력을 확인하는 평판재하시험과 상대 다짐도를 구하기 위한 현장들밀도시험을 이용하고 있으나, 최근에는 현장 여건에 맞는 적합성과 경제성, 신속성 등을 고려한 동적 콘 관입 시험과 동평판재하시험 등의 이용이 증가하는 상황이다. 이에 본 연구에서는 이러한 여러 다짐평가기법간의 상관성을 분석하기 위하여 실제 도로공사현장 3개소에서 노상두께 20cm, 30cm, 40cm에 대한 평판재하시험, 현장들밀도시험, 동적 콘 관입시험, 동평판재하시험을 이용하여 노상토의 지지력을 평가하였다. 또한, 각각의 다짐평가기법간의 결과를 비교 분석하여, 향후 활용법에 대하여 살펴보았다.

• 한국지반공학회논문집
• /
• 제25권5호
• /
• pp.47-52
• /
• 2009

모래 치환법은 현장에서 다짐된 흙의 밀도를 구하기 위하여 사용되는 보편적인 방법으로 검증용 용기와 현장 시험 구멍의 크기 또는 체적이 서로 비슷하여 모래가 쌓이는 과정이 비슷하다는 가정에 기초하고 있다. 본 연구에서는 모래 치환법에서 모래가 현장 시험 구멍에 채워지는 과정을 실내에서 재현하여 모래가 쌓이는 과정이 계산되는 밀도에 미치는 영향을 평가하였다. 다양한 모양을 가진 시험 구멍을 제작하여 시험 구멍의 체적을 모래 치환법으로 구하였으며, 모래 종류에 따른 영향을 알아보기 위하여 입자 크기가 다른 세 종류의 모래를 사용하여 모래 치환법을 실시하였다. 실제 밀도와 모래 치환법을 이용하여 계산된 밀도 사이의 오차는 사용한 모래의 종류에 따라 상당한 차이를 나타내었다. 하지만 시험 구멍의 바닥 형태나 사용한 모래의 종류에 관계없이 시험 구멍의 깊이가 깊어질수록 계산되는 밀도의 오차는 감소하는 경향을 보였다. 이러한 연구 결과를 바탕으로 모래 치환법에 의한 흙의 밀도 시험 방법을 재평가하고 개정할 수 있는 기초 자료를 마련하였다.

• 한국지반환경공학회 논문집
• /
• 제14권3호
• /
• pp.13-17
• /
• 2013

Determination of geotechnical characteristics of soil is either to use the field samples to measure the characteristics of soil through laboratory test or measuring the characteristics directly in the field. Field test can be derived similar value by considering characteristics of site and laboratory test can be confirmed the characteristic of soil by testing with field samples. This article describes relative density as the measure of compaction for cohesionless soils and presents several simple and mathematical relationships to help engineers estimate needed parameters for relative density calculations. The main purpose of this research is to investigate possible correlations between coefficient of uniformity, coefficient of curvature, maximum and minimum void ratio, mean grain size. Results show a linear relationship between the minimum and maximum void ratios and a power function relationship between coefficient of uniformity and the limiting void ratios. Void ratio range, which is the difference between the maximum and minimum void ratios, appeared to be log normally distributed but showed no simple mathematical fit to the data. these results were shown to help engineers estimate needed parameters for relative density calculations.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1199-1204
• /
• 2005

The purpose of field monitoring system in KHC-Test Road located at Joongbu-Inland Highway, is to provide the performance data for traffic and environmental loadings from pavement surface. Among them, water content reflectometers(WCR) are used to measure the volumetric water content of subgrades soils used in test roads. However, most of the WCRs are not well-calibrated based on the field conditions. In this study, the laboratory based test is performed at various density conditions to evaluate the volumetric water content in subgrade Soils with a WCR. Based on the laboratory testings, the effect of density on WCR measurement are well evaluated for predicting the volumeric water content.of subgrades soils in KHC-Test road.

• 천문학회보
• /
• 제45권1호
• /
• pp.50.1-50.1
• /
• 2020

In this topic, I will introduce a recent work on reconstructing the cosmic density field based on the GAN. I will show the performance of the GAN compared to the traditional Unet architecture. I'd also like to discuss a 3-channels-based 2D datasets for the training to recover the 3D density field. Finally, I will present some performance tests based on the test datasets.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.306-313
• /
• 2005

For seismic response analysis of rockfill dam, dynamic material properties, by field test, are needed. Density and elastic wave profiles have to be known to get an information of the material properties of structure. In this study, various field tests are applied to the example of rockfill dam to get an information of dynamic material properties and seismic safety is evaluated by seismic response analysis with the result of field tests.