• Journal of Environmental Science International
• /
• v.4 no.1
• /
• pp.19-28
• /
• 1995

A rainfall runoff model described in this paper which is based on Basin- wide Ecological Model(BAWEM) calculates the fate of afro-chemicals in a watershed located of golf links. The rainfall runoff coefficients of afro-chemicals, which are the dominant parameters to predict the movement of agro-chemicals from soil and turfgrass to downstream water, are estimated. Also, the model is used to estimate the level of health risks the residents around golf links are exposed to. The fidelity of rainfall runoff model of afro-chemicals was validated by the observed data obtained during rainy period. The calculated results from this model were found to be in the same order of that of the observed. The rainfall runoff coefficients of four agro-chemicals used in golf links were 5.4$\times$$10^{-3}$, 1.9$\times$$10^{-3}$, 3.0$\times$$10^{-4}$ and 4.4$\times$$10^{-3}$ for flutolanil, isoprothiolane, chlorpyrifos and simazine, respectively The health risk level to the residents around golf links is evaluated to be rather low:the ratio of estimated dose through drinking water to the 10% of ADI(Acceptable Daily Intake) value or VSD for 10-a life time risk varied in the range of 0.005~0.04 and 0.003~0.11, respectively, for both the annual mean and maximum monthly mean cases.

• Archives of design research
• /
• v.17 no.4
• /
• pp.15-26
• /
• 2004

After 19th century of Chosun Dynasty Gilsnagmunja-do such as longevity, good fortune, health, well-being which was explosively prevalent and Hyojemunja-do which was panoramically decorated with eight characters of filial piety, fraternal devotion, loyalty, trust, courtesy, commitment, integrity and humility for enlightment of the public under the name of political ideology are consistency or same origin in traditional concept of Orient. Therefore, in view of Western standard, they are showing an illustration and a photograph of characters in design. There are some differences in way of expressions. They were considerably popular not only in Chosun Dynasty but in China, Japan and Vietnam where belong to the cultural territory of chinese characters. Though, Hyojemunja-do which was built-up in the late period of Chosun Dynasty and developed fro chinese mode is a very peculiar iconography and mode of Chosun Dynasty. Hyojemunja-do is also classified from Chinese Nianhua designed for supply of Conficianism ethics or Folk Painting designed for practical use in chinese cultural territory. In the late period of 19th century, Hyojemunja-do which was re-built with creative modeling has been developed in peculiar mode in the province of Kyunggi, Kangwon(Kwan dong region), Kwanseo region, Jeju island and Namdo region by the diversified level of painters.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.255-258
• /
• 2011

Wi-Fi is a rapidly spreading communications network with Smart phone's publication, the technology has become Ubiquitous-based core network which is connected to personal computers, laptops, and tablet PC. Wi-Fi can send currently a variety of data standard due to developed wireless LAN communications network. One of Wi-Fi standard protocols, which is IEEE 802.11n, use 2.4GHz and 5GHz band. 2.4GHz band is used for 802.11b/g protocol because wavelength is long, diffraction and receiving distance is enough to connect other device. 5GHz band has more available channels to use than 2.4GHz band, so there is no frequency interference of other wireless device such as Bluetooth, RFID. Moreover, there is low interference between channels due to small users in each bandwidth level. In the thesis, we are going to analyze 802.11a/b/g protocol which has used since the beginning of Wi-Fi protocol and 802.11n protocol which is used lately. Furthermore, we look into development and direction for standardization of the next generation wireless LANs which are 802.11ac and 802.11ad. In addition, we will consider for the security, vulnerabilities and its countermeasure in Wireless LAN.

• The KIPS Transactions:PartA
• /
• v.11A no.5
• /
• pp.365-372
• /
• 2004

Recently, the studies for mesh simplification have been increased according to the application area of the complicate 3D mesh models has been expanded. This paper introduces a novel method for mesh simplification which uses the properties of the mesh model in addition to the geometric locations of the model. The information of the 3D mesh model Includes surface properties such as color, texture, and curvature information as well as geometic information of the model. The most of current simplification methods adopt such geometric information and surface properties individually for mesh simplification. However, the proposed simplification method combines the geometric information and solace properties and applies them to the simplification process simultaneously. In this paper, we exploit the extended geometry based quadric error metric(QEM) which relatively allows fast and accurate geometric simplification of mesh. Thus, the proposed mesh simplification utilizes the quadric error metric based on geometric information and the surface properties such as color, normal, and texture. The proposed mesh simplification method can be expressed as a simple quadric equation which expands the quadric error metric based on geometric information by adding surface properties such as color, normal, and texture. From the experimental results, the simplification of the mesh model based on the proposed method shows the high fidelity to original model in some respects such as global appearance rather than using current geometry based simplification.

• Journal of Biomedical Engineering Research
• /
• v.29 no.1
• /
• pp.32-39
• /
• 2008

This paper reports on a realtime OS based master-slave configuration robot control system for laparoscopic surgery robot which enables telesurgery and overcomes shortcomings with conventional laparoscopic surgery. Surgery robot system requires control system that can process large volume information such as medical image data and video signal from endoscope in real-time manner, as well as precisely control the robot with high reliability. To meet the complex requirements, the use of high-level real-time OS (Operating System) in surgery robot controller is a must, which is as common as in many of modem robot controllers that adopt real-time OS as a base system software on which specific functional modules are implemened for more reliable and stable system. The control system consists of joint controllers, host controllers, and user interface units. The robot features a compact slave robot with 5 DOF (Degree-Of-Freedom) expanding the workspace of each tool and increasing the number of tools operating simultaneously. Each master, slave and Gill (Graphical User Interface) host runs a dedicated RTOS (Real-time OS), RTLinux-Pro (FSMLabs Inc., U.S.A.) on which functional modules such as motion control, communication, video signal integration and etc, are implemented, and all the hosts are in a gigabit Ethernet network for inter-host communication. Each master and slave controller set has a dedicated CAN (Controller Area Network) channel for control and monitoring signal communication with the joint controllers. Total 4 pairs of the master/slave manipulators as current are controlled by one host controller. The system showed satisfactory performance in both position control precision and master-slave motion synchronization in both bench test and animal experiment, and is now under further development for better safety and control fidelity for clinically applicable prototype.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.1-9
• /
• 2016

Railroad bridges account for 25% of the entire high-speed rail network. Railway bridges are subject to gradual structural degradation or fatigue accumulation due to consistent and repeating excitation by fast moving trains. Wireless sensing technology has opened up a new avenue for bridge health monitoring owing to its low-cost, high fidelity, and multiple sensing capability. On the other hand, measuring the transient response during train passage is quite challenging that the current wireless sensor system cannot be applied due to the intrinsic time delay of the sensor network. Therefore, this paper presents a framework for monitoring such transient responses with wireless sensing systems using 1) real-time excessive vibration monitoring through ultra-low-power MEMS accelerometers, and 2) post-event time synchronization scheme. The ultra-low power accelerometer continuously monitors the vibration and trigger network when excessive vibrations are detected. The entire network of wireless smart sensors starts sensing through triggering and the post-event time synchronization is conducted to compensate for the time error on the measured responses. The results of this study highlight the potential of detecting the impact load and triggering the entire network, as well as the effectiveness of the post-event time synchronized scheme for compensating for the time error. A numerical and experimental study was carried out to validate the proposed sensing hardware and time synchronization method.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.11
• /
• pp.1021-1030
• /
• 2010

In the sensor network, many tiny nodes construct Ad-Hoc network using wireless interface. As this type of system consists of thousands of nodes, managing each sensor node in real world after deploying them is very difficult. In order to install the sensor network successfully, it is necessary to verify its software using a simulator beforehand. In fact Sensor network simulators require high fidelity and timing accuracy to be used as a design, implementation, and evaluation tool of wireless sensor networks. Cycle-accurate, instruction-level simulation is the known solution for those purposes. In this paper, we developed an instruction-level sensor network simulator for Telos sensor node as named TeloSlM. It consists of MSP430 and CC2420. Recently, Telos is the most popular mote because MSP430 can consume the minimum energy in recent motes and CC2420 can support Zigbee. So that TeloSlM can provide the easy way for the developers to verify software. It is cycle-accurate in instruction-level simulator that is indispensable for OS and the specific functions and can simulate scalable sensor network at the same time. In addition, TeloSlM provides the GUI Tool to show result easily.

• The Journal of the Korea Contents Association
• /
• v.21 no.9
• /
• pp.75-87
• /
• 2021

The purpose of this study is to derive the characteristics of interaction design for each stage of content composition so that it can be referred to in the planning and production of virtual reality safety education contents. It was confirmed that each of the following interaction design features was found in the three configuration steps: acquisition of situation response procedure knowledge, accident situation experiential learning, and content confirmation and evaluation. First, it was revealed that the quality of experience was controlled by increasing the fidelity of behaviors and reducing general and repetitive behaviors in order to emphasize the educational content-related experiences in the learner experience stage. Second, in order for learners to easily recognize main interaction objects in order to acquire information on safe behavior procedures in unfamiliar environments, use of spatial UI or signifiers using arrows or symbols, posts that specifically instruct actions, and multisensory signals Therefore, it was found to be important to emphasize essential actions in a way that lowers the degree of freedom of user experience, and the proportion of non-realistic interactions for cognitive interactions was found to increase. Lastly, in the confirmation and evaluation stage of the experience, it is important to use the meta UI to alleviate negative experiences such as physical damage after experiencing a safety accident situation,

• Smart Structures and Systems
• /
• v.24 no.6
• /
• pp.769-781
• /
• 2019

Dynamic displacement response of civil structures is an important index for in-construction and in-service structural condition assessment. However, accurately measuring the displacement of large-scale civil structures such as high-rise buildings still remains as a challenging task. In order to cope with this problem, a vision-based system with the use of industrial digital camera and image processing has been developed for long-distance, remote, and real-time monitoring of dynamic displacement of supertall structures. Instead of acquiring image signals, the proposed system traces only the coordinates of the target points, therefore enabling real-time monitoring and display of displacement responses in a relatively high sampling rate. This study addresses the in-situ experimental verification of the developed vision-based system on the Canton Tower of 600 m high. To facilitate the verification, a GPS system is used to calibrate/verify the structural displacement responses measured by the vision-based system. Meanwhile, an accelerometer deployed in the vicinity of the target point also provides frequency-domain information for comparison. Special attention has been given on understanding the influence of the surrounding light on the monitoring results. For this purpose, the experimental tests are conducted in daytime and nighttime through placing the vision-based system outside the tower (in a brilliant environment) and inside the tower (in a dark environment), respectively. The results indicate that the displacement response time histories monitored by the vision-based system not only match well with those acquired by the GPS receiver, but also have higher fidelity and are less noise-corrupted. In addition, the low-order modal frequencies of the building identified with use of the data obtained from the vision-based system are all in good agreement with those obtained from the accelerometer, the GPS receiver and an elaborate finite element model. Especially, the vision-based system placed at the bottom of the enclosed elevator shaft offers better monitoring data compared with the system placed outside the tower. Based on a wavelet filtering technique, the displacement response time histories obtained by the vision-based system are easily decomposed into two parts: a quasi-static ingredient primarily resulting from temperature variation and a dynamic component mainly caused by fluctuating wind load.

• (The)Study of the Eastern Classic
• /
• no.71
• /
• pp.71-98
• /
• 2018

This study is aimed to figure out the way Yoon Hee-sun perceived the real situations of the society under the Japanese ruling and responded to overcome difficulties in the process of anti-Japanese independence movement. Yoon Hee-sun played an important role as a female activist of the righteous army movement in Kangweon-do and Manchuria. She was a daughter-in-law of Yu Hong-seok, wife of Yu Jae-won, and mother of Yu Don-sang. Three generations of her family had taken the lead in anti-Japanese independence movement. The Yus belonged to a school of 'Hwaseo' and devoted their lives to the independent movement based on the thought of 'wijung chuksa sasang', which means 'defending orthodoxy and rejecting heterodoxy'. They desired to go back to the past and recover as it was rather than building a new society. Therefore, their fights against Japan's invasion were not for establishing a modern nation-state but for recovering the royal authority of the existing order. Both her maiden home and her in-laws belonged to a school of 'Hwaseo' and Yoon Hee-sun couldn't go out of the boundary of her family background. Also, the motivation of her participation in the righteous army movement was based on the confucian values such as loyalty to the king, filial piety and fidelity. In particular, she possessed a high level of self-awareness not only as a wife but also as a woman. On the basis of this, she faced up to reality. For the more effective way of revolt against Japan's invasion, she determined to change the perception of women identified only as a wife of somebody. She thought her duty was to enlighten women through 'education'. As a result, manifestoes and songs supporting the righteous army movement were used as a powerful method.