• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2007년도 추계학술발표논문집
• /
• pp.93-102
• /
• 2007

Biocomposite was organized with biodegradable polymer and natural fiber that has potential to be used as replacement for glass fiber reinforced polymer composite with the benefits of low cost, low density, acceptable specific strength, biodegradability, etc. Until now, non-wood fibers have been used as reinforcements of biocomposite which are all plant-based fibers. The present study focused on investigating the fabrication and characterization of biocomposite reinforced with red algae fiber. The bleached red algae fiber(BRAF) showed very similar crystallinity to the cellulose. It has high stability against thermal degradation (maximum thermal decomposition temperature of 359.3$^{\circ}C$) and thermal expansion. Biocomposites reinforced with BRAF have been fabricated by a compression molding method and their mechanical and thermal properties have been studied. The storage modulus and the thermomechanical stability of PBS matrix are markedly improved with reinforcing the BRAF. These results support that the red algae fiber can be used as an excellent reinforcement of biocomposites as "green-composite" or "eco-composite".

• 한국건축시공학회지
• /
• 제3권2호
• /
• pp.119-127
• /
• 2003

Test specimen test was performed using concrete reinforced with fiber sheet and the test variables were based on the kinds of fiber and the number of reinforcement layers. Using steel-concrete reinforced with fiber sheet, compression tests were performed and the test variables were the kinds of fiber, number reinforcement layers and reinforcement layer order. The following results were obtained: 1) It was demonstrated that compressive strength of the test specimen reinforced during test specimen test and member test increased as the number of reinforcement layers increased. 2) It was shown that non-reinforced test, specimen were destroyed during the member tests, but the specimen reinforced with CFS destroyed and the GFS-reinforced specimen and composite reinforced specimen showed ductile destruction. 3) As a result of tests on kinds of reinforcement fiber, it was demonstrated that CFS-reinforced test specimen had higher compressive strength in a 공시체 test. In the member test, 2ply-and 3ply-GFS reinforced specimens except lplied one had higher compressive strength. It was because partial destruction occurred due to the rate of height/section. 4) For layer strength order, compared with test specimen reinforced only with a single reinforced material, test specimen reinforced with CFS and GFS, and test specimen reinforced with CFS first showed better results in compressive strength and ductility judgement.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.469-472
• /
• 2008

일반적으로 콘크리트는 높은 압축강도에 비해 매우 낮은 휨강도 및 인장강도를 가진 재료지만 고인성 콘크리트의 경우 다량의 섬유를 혼입함으로써 높은 인장강도를 가지는 한편, 균열 발생 후에도 변형경화 현상을 보이며 높은 인성을 가지게 된다. 따라서 이러한 고인성 콘크리트의 인장특성을 평가하기 위해서는 기존 콘크리트의 시험방법과 다른 일축인장시험이 필수적이라 할 수 있다. 그러나 콘크리트의 압축시험에 있어서도 치수, 형상, 단부조건 등의 요인이 변하면 얻어지는 결과가 상이한 상황에서, 시멘트계 재료의 인장시험에서는 재료의 특성상, 섬유의 배향 문제에서부터 섬유길이와 공시체 단면치수의 관계가 결과에 영향을 미치게 된다. 이에 본 연구에서는 시험체 치수 및 시험방법에 따른 고인성 콘크리트의 인장특성을 검토하였고, 시험체 치수가 얇아질수록 섬유배열이 곧게 되어 더 높은 성능을 발휘함을 확인 할 수 있었다.

• 한국산학기술학회논문지
• /
• 제16권8호
• /
• pp.5600-5607
• /
• 2015

본 연구의 목적은 폴리에틸렌섬유로 보강한 무시멘트 복합재료의 인장 거동을 실험적으로 조사하는 것이다. 폴리에틸렌섬유 보강 무시멘트 복합재료의 성능을 평가하기 위하여 4가지 배합을 결정하였다. 물/결합재비는 0.30에서 0.38이며, 폴리에틸렌섬유의 혼입량은 부피비로 1.75 %이다. 일축 인장 실험, 밀도 실험, 압축강도 실험 등 일련의 실험을 수행하였으며, 실험결과 본 연구에서 조사한 폴리에틸렌섬유 보강 무시멘트 복합재료는 기존 복합재료에 비하여 높은 인장강도와 높은 연성 등 전반적으로 우수한 인장 성능을 나타내었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.799-800
• /
• 2012

• 복합신소재구조학회 논문집
• /
• 제6권4호
• /
• pp.58-63
• /
• 2015

The purpose of this experimental research is to evaluate the workability and strength properties of hybrid fiber reinforced concrete containing amorphous steel fiber and organic fiber. For this purpose, the hybrid fiber reinforced concrete containing amorphous steel fiber(ASF) with polyamide(PA) and polyvinyl alcohol(PVA) fiber, respectively were made according to their total volume fraction of 0.5% for water-binder ratio of 33%, and then the characteristics such as the workability, compressive strength, and flexural strength of those were investigated. It was observed from the test results that the workability and compressive strength at 7 and 28 days were decreased and the flexural strength at 7 and 28 days was increased with increasing ASF and decreasing organic fiber.

• 소성∙가공
• /
• 제4권4호
• /
• pp.398-409
• /
• 1995

The wear properties of the alumina short fiber reinforced tin-bronze matrix composites manufactured by hot pressing was studied at the room temperature and $350^{\circ}C.$ The wear loss of various specimens having different constituent and different density was examined by a pin-on-disc type wear testing machine. The results were discussed by the observation of the worn surface morphology and the analysis of the composition on the worn surfaces. Since the reinforced effect of the alumina fiber on the wear resistance was dependent on the strength of alloy matrix, the pressureless sintered composites having a lower matrix strength showed a marked increase in wear resistance by the fiber reinforcement. As the wear condition became severe, the fiber reinforcement was more effective. The delamination on the wear surface was observed in the pressureless sintered specimens having pores which are related to the initiation and the propagation of cracks. However, the wear mechanism acting on a big failure area was not found on the wear surfaces of the hot pressed specimens having a few pores.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 2003년도 추계 학술논문발표회 논문집
• /
• pp.113-117
• /
• 2003

The reliability of machined fiber reinforced composites (FRC) in high strength applications and the safety in using these components are often critically dependent upon the quality of surface produced by machining since the surface layer may drastically affect the strength and chemical resistance of the material [1,2,3,4]. Current study will discuss the characterization of fiber pull-out in orthogonal cutting of a fiber-matrix composite materials. A sparsely distributed idealized model composite material, namely a glass reinforced polyester (GFRP) was used as workpiece. Analysis method employs a force sensor and the signals from the sensor are processed using AR time series model. The experimental correlation between the fiber pull-out and the AR coefficients is examined first and effects of fiber orientation, cutting parameters and tool geometry on the fiber pull-out are also discussed.

• Journal of the Korean Wood Science and Technology
• /
• 제44권4호
• /
• pp.505-514
• /
• 2016

To study mechanical properties of fiberglass reinforced wood-based composite (FRWC), fiberglass with a diameter of $20{\mu}m$ was selected to prepare test specimens. Mechanical properties of fiberglass reinforced wood-based composite were determined by three-point-bending test while its microstructure was characterizes by scanning electron microscopy (SEM). The results showed that mechanical properties of fiberglass reinforced wood-based composite were superior to that of the wood fiberboard based on the contrasting mechanical curves and the analysis of fracture mechanism. It is believed that the material design with this "sandwich" structure brings a unique buffering capacity of fiberglass into play in the composites. So the specimen did not produce a sudden fracture failure at high level of applied loads because it had a bearing ability. The SEM analysis showed that the working strength of PVAc adhesive was high; under a bearing force, it could properly transfer a load. In addition, glass fiber mesh and wood fiber board combined well.

• Structural Engineering and Mechanics
• /
• 제37권5호
• /
• pp.529-542
• /
• 2011

Three dimensional solutions for free vibrations analysis of functionally graded fiber reinforced cylindrical panel are presented, using differential quadrature method (DQM). The orthotropic panel is simply supported at the edges and is assumed to have an arbitrary variation of reinforcement volume fraction in the radial direction. Suitable displacement functions that identically satisfy the simply supported boundary condition are used to reduce the equilibrium equations to a set of coupled ordinary differential equations with variable coefficients, which can be solved by differential quadrature method to obtain natural frequencies. The main contribution of this work is presenting useful results for continuous grading of fiber reinforcement in the thickness direction of a cylindrical panel and comparison with similar discrete laminate composite ones. Results indicate that significant improvement is found in natural frequency of a functionally graded fiber reinforced composite panel due to the reduction in spatial mismatch of material properties.