1 |
Al-Salem, S.M., Lettieri, P., Baeyens, J. 2009. Recycling and recovery routes of plastic solid waste (PSW): a review. Waste Management (Oxford) 29(3): 2625-2643.
DOI
|
2 |
Biot, M.A. 1996. Theory of propagation of elastic waves in a fluid-saturated porous solid. I. Low frequency range. Journal of the Acoustical Society of America 28(2): 168-178.
DOI
|
3 |
Bashar, M.T., Sundararaj, U., Mertiny, P. 2013. Mode-I interlaminar fracture behaviour of nanoparticle modified epoxy/basalt fibre-reinforced laminates. Polymer Testing 32(2): 402-412.
DOI
|
4 |
Christensen, R.M., Waals, F.M. 1972. Effective stiffness of randomly oriented fibre composites. Journal of Composite Materials 6: 518-532.
DOI
|
5 |
Denneulin, S., Viot, P., Leonardi, F., Lataillade, J.L. 2012. The influence of acrylate triblock copolymer embedded in matrix on composite structures' responses to lowvelocity impacts. Composite Structures 94(5): 1471-1481.
DOI
|
6 |
Evans, K.E., Gibson, A.G. 1986. Prediction of the maximum packing fraction achievable in randomly oriented short-fibre composites. Composite Science Technology 25(2): 149-162.
DOI
|
7 |
Guo, M. 2006. MorPhology controlling and properties of polyporpylenel/glass fiber composites obtainedvia shear sterss field. Ph.D. Thesis, Sichuang University, CHN.
|
8 |
Guo, M., Yang, H., Tan, H., Wang, C., Zhang, Q., Du, R. 2006. Shear enhanced fiber orientation and adhesion in PP/glass fiber composites. Macromolecular Materials and Engineering 291(3): 239-246.
DOI
|
9 |
Hull, D., Clyne, T.W. 1996. An introduction to composite material, 2nd Ed., Cambridge University Press, UK.
|
10 |
Jain, L.K., Wetherhold, R.C. 1992. Effect of fiber prientation on the fracture toughness of brittle matrix composites, Acta Metallurgica et Materialia 40(6): 1135-1143.
DOI
|
11 |
Lee, C.F., Sue, H.J., Fiscus, D.M. 2013. Refined fixture design for effective essential work of fracture toughness characterization of m-LLDPE thin films. Polymer Testing 32(2): 256-264.
DOI
|
12 |
Lu, G.H., Li, X.T. 1996. Electrical properties and shielding effects (by theoretical calculation) for larbon fibers/abs resin composites mixed by three different ways. Composites and Technology 12(56): 193-199.
|
13 |
Ma, Y. 1995. The exploration on analytical method of micromechanics model and rigidity parameters of Scrimber. Journal of Northeast Forestry University 23(4): 107-111.
|
14 |
Ma, Y. 2002. Study on quantitatively calculated theory of micro-meter wood fiber directional reconstituted content of cell fiber. Journal of Biomathematics 17(3): 353-357.
|
15 |
Ma, Y. 2003. Study on cell break theory of using wood fiber micro-meter aligned reconstituted technology forming super High-intensity Wood-based Panel. Scientia Silvae Sinicae 39(3): 111-115.
|
16 |
Molgaard, C. 2005. Environmental impacts by dis posal of plastic from municipal solid waste. Resources Conservation and Recycling 15(2): 51-63.
|
17 |
Norman, D.A., Robertson, R.E. 2003. The effect of fiber orientation on the toughening of short fiber-reinforced polymers. Journal of Applied Polymer Science 90(10): 2740-2751.
DOI
|
18 |
Pedroso, A.G., Rosa, D.S. 2005. Mechanical, thermal and morphological characterization of recycled LDPE/corn starch blends. Carbohydrate Polymers 59(5): 1-9.
DOI
|
19 |
Peijs, T., Garkhail, S., Heijenrath, R., Vanden Oever, M., Bos, H. 1998. Thermoplastic composites based on flax fibre and polypropylene: Influence of fibre length and fibre volume fraction on mechanical properties. Macromolecular Symposia 127(3): 193-203.
DOI
|
20 |
Shen, G. L., Hu, G.K. 2006. Compound material mechanics. Tsinghua university press, Beijing, CHN.
|
21 |
Simonsen, J. 1996. Utilizing straw as a filler in thermoplastic building materials. Construction and Building Materials 10(1): 435-440.
DOI
|
22 |
Thomason, J.L., Vlug, M.A. 1996. Influence of fibre length and concentration on the Properties of glass fibre-reinforced polypropylene: 1. Tensile and flexural modulus. Composites A 27(1): 477-484.
DOI
|