• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.186-191
• /
• 2001

Tensile residual stress happen by difference of coefficients of thermal expansion between fiber and matrix is one of the serious problems in metal matrix composite(MMC). In this study, TiNi alloy fiber was used to solve the problem of the tensile residual stress as the reinforced material. TiNi alloy fiber improves the tensile strength of composite by occurring compressive residual stress in matrix using shape memory effect of it. Pre-strain was added to generate compressive residual stress inside TiNi/A16061 shape memory alloy(SMA) composite. It was also evaluated the effect of compressive residual stress corresponding to pre-strains variation and volume fraction of TiNi alloy. AE technique was used to clarify the microscopic damage behavior at high temperature and the effect of pre-strain difference of TiNi/A16061 SMA composite. In addition, two dimensional AE source location technique was applied to inspect the crack initiation and propagation in composite.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.72-77
• /
• 2001

Tensile residual stress happen by difference of coefficients of thermal expansion between fiber and matrix is one of the serious problems in metal matrix composite(MMC). In this study, TiNi fiber was used to solve the tensile residual stress as the reinforced material. TiNi fiber improves the tensile strength of composite by occurring compressive residual stress in matrix using shape memory effect of it. Pre-strain was added to generate compressive residual stress inside TiNi/A16061 composite. It was also evaluated the effect of compressive residual stress corresponding to pre-strains variation. AE technique was used to clarify the microscopic damage behavior at high temperature and the effect of pre-strain difference of TiNi/A16061 shape memory alloy composite.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.2
• /
• pp.18-27
• /
• 1997

Al 6061 alloy reinforced with 10 vol.% ${\delta}-Al_2O_3$ short fiber was fabricated by Rheo-compocasting and squwwze cating. Extrusion processings were performed at temperatures from 40$0^{\circ}C$ to 55$0^{\circ}C$ with various extrusion ratio for curved shape dies. In proportion to the increase of extrusion ratios and temperatures, ultimate tensile strength for extruded materials improved. SEM observation of fractured surfsce was capcble oof accounting for fracture mechanism and bounding state of fiber and matrix.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.4
• /
• pp.58-66
• /
• 1996

The purpose of this investigation is to estimate the strength with the variations of the notch shape and the adgesive condition at the fiber/matrix micro interface of E-glass/PP laminates. To promote the degradation of the adhesive condition at the fiber/matrix micro interface without matrix dissolution loss, low-, hot-wet and spiking tests were carried out. The absorpotion properties and the tensile properties were compared accrding to the fiber orientation and the content. The results show that, firstly, saturated moisture absorption was reached at 5cycles and their absorptions of RD-40, UD-42 and UD-50 are 0.68%, 0.63%, 0.60%, respectively. Secondly, all the specimens investigated were mostly degraded at 5cycle, whereas UD-50 having ellipse shaped notch the least decrement of strength.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.415-416
• /
• 2009

• Proceedings of the Korean Fiber Society Conference
• /
• 2000.04a
• /
• pp.101-104
• /
• 2000

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.73-74
• /
• 2018

In this study, it evaluate the tensile properties of polyamide fiber reinforced cementitious composite and hooked steel fiber reinforced cementitious Composites by strain rate. Polyamide fiber reinforced cement composites (PAFRCC) and Hooked Steel Fiber Reinforced Cement Composite(HSFRCC) were fabricated. Each specimen was reinforced with 1.0 and 2.0vol% fiber. The length of the reinforced fiber was 30 mm for both fibers, and the tensile test specimen was made in dumbbell shape. As a result, the tensile strength of fiber in polyamide fiber and the mechanical bonding between fiber and matrix in hooked steel fiber are considered to be the main factors affecting tensile behavior of fiber reinforced cement composite.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.337-338
• /
• 2003

PTT(poly trimethylene terephthalate)섬유는 PET(polyethylene terephthalate)섬유에 비하여 탄성 (elasticity)가 우수하고 염색성이 PET와 유사한 점에서 차세대섬유로 분류되고 있다. 분자의 구조가 trans-trans의 fully extended chain(rod shape)형태인 PET에 비하여 trans-gauche-gauche-trans의 스프링과 같은 extended zigzag(helix shape)이어서 탄성회복성이 우수하다. 또한 PTT의 탄성계수값은 PET에 비하여 $\frac{1}{2}$정도이다. 의복을 착용중 신장과 수축을 반복하는 과정에서 섬유는 탄성을 점차 상실하게 되는데, 이 응력완화의 변화특성에 따라서 착용감이 영향을 끼친다. (중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.110-110
• /
• 2003

We attempted to establish the pattern remaking system using the three-dimensional data of the shape of clothes being worn, especially based on the knowledge of pattern construction. Moreover we tried to develop the deformable body model which can represent customers' body shape in the screen.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2003.11a
• /
• pp.171-172
• /
• 2003

직물의 외관 품위는 직물의 촉각뿐만 아니라 시각적인 자극에 의해서 크게 결정된다. 견직물이나 양모직물의 광택 등 자연스러운 광학적 특성은 특히 구성 섬유의 특성이나 구성사의 구조, 직물 조직 등과 밀접한 관계가 있는데 그 중 섬유단면형태가 가장 중요한 인자라고 할 수 있다. 따라서 단면형상에 따른 직물의 외관 감성 특히 시각특성에 미치는 영향을 알아보기 위하여 직물의 광택도를 측정하였다. 그 결과 섬유 단면의 요철이 많으면 광택도가 감소하면 섬유단면이 매끈한 부분이 많은 섬유는 광택도가 증가하였다. 그러나 이섬도 혼섬단면사로 구성된 직물은 광택이 우수하면서 은은함을 부여해주었다.