• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.11 s.353
• /
• pp.14-18
• /
• 2006

Optical interferometer is used for various optical measurement fields in optical metrology and biomedical measurements. In an optical interferometer, optical delay line has to change the optical path length of a reference arm to match with that of a sample in and it's speed was limited by reference arm movement speed. In this paper, we proposed an all-fibered RSODRapid Scanning-speed Optical Delay) without any mechanical movement, and we applied this system to optical interferometer. Experimental setup is consist of pulse laser source (center wavelength 1304nm, pulse width 30ps, repetition rate 10GHz), two phase modulators and dispersive shifted fiber. As experimental results, we obtain the maximum time delay of 11ps at 10MHz repetition rate, and it is easily tuneable the time delay by modulation frequency and modulation voltage.

• Archives of Pharmacal Research
• /
• v.26 no.4
• /
• pp.286-293
• /
• 2003

Several polyphenolic compounds and complex mixtures were isolated from brown algae species. The 1,1-diphenyl-2-picryhydarzyl (DPPH) radical scavenging activity and ferric reducing antioxidant power (FRAP) of these compounds were evaluated to determine their physiological usefulness as antioxidants for vascular protection. The antioxidative protection of low-density lipoprotein (LDL) was also evaluated and compared with that of catechin, because the generation of oxidized LDL is one of the most active and specific risk factors contributing to atherogenesis. Oral administration to rats of a commercially available sample ($VNP^{TM}$) containing 30% of these polyphenolic compounds and 70% dietary fiber revealed that the serum reducing capacity measured in terms of FRAP value was significantly elevated 30 min after the treatment, but declined rather quickly thereafter, indicating the good oral absorption of the compounds and their fast binding to the lumenal surface of the blood vessels. An eight-week, human, clinical trial (n=31) of $VNP^{TM}$ showed significant improvement in erectile function measured by IIEF (international index of erectile function) score. These results collectively demonstrated the usefulness of these polyphenolic compounds as fundamental chemopreventive agents against vascular risk factors originating from oxidative stress.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.2 s.150
• /
• pp.316-325
• /
• 2006

The colors of apparel are getting more important to give the differentiated character on fiber and fabrics. This study was to extract the favorable colors that become to facial color types. Research was carried out to classify the facial colors into several similar facial color groups. With JX-777, 2 points of face: forehead and cheek, were measured and classified into 3 facial color types. Sample size was 418 Korean adult males and other 15 of new males subjects. New chosen 3 subjects who had the classified facial color types, wore silver gown and black hat on his head to minimize the interaction of the clothe color an hair. The 40 standardized color samples were used to extract the favorable colors. 187 respondents answered the degree of becomingness of color samples on 3 facial color types. Data were analyzed by K-means cluster analysis, ANOVA and Duncan multiple range test using SPSS Win. 12. Findings were as follows: 1. 418 subjects who had YR colors were classified into 3 kinds of facial color groups. Type 1 was 4.59YR 5.89/5.12, Type 2 was 5.61 YR 5.41/4.79 and Type 3 was 4.38YR 6.49/4.89 respectively. 2. Favorable colors for Type 1 were 2 colors that belonged to ' a ' group from among colors that were divided into a, b, c group and 18 colors that belonged to ' a ' group from among colors that were divided into a, b group by Duncan post hoc test. 3. Type 2 showed that this type had many unfavorable colors. Unfavorable colors were 16 colors that belonged to ' c ' by Duncan test. 5. Favorable colors for Type 3 were 14 colors that belonged to ' a ' from among colors that were divided into a, b, c and 16 colors that belonged to ' a ' from among colors that were divided into a, b by Duncan test.

• Textile Coloration and Finishing
• /
• v.11 no.2
• /
• pp.9-18
• /
• 1999

In order to establish fundamental data for the betterment of Polyester microfiber fabric handle, a study by using fixed warp of ITY yarn samples with P/F, DTY, and ITY weft yarns was performed. For this purpose the samples of total 27 kinds were prepared. That is, each sample yarn was twisted in three ways and for each twisted yarn the fabric structures were modified in three ways, plain, twill, and satin. The examination was done by focusing on the point of the change of handles and the characteristics of the mechanical properties of the samples with the change of yarn and the fabric structure. The handles and the mechanical properties were examined with the KES-F system suggested by Kawabata. The results were as follows : 1. WT and MIU increased with increasing the twist. By comparing WT and MIU by yarn, DTY was higher than P/F. It appeared that twill and satin were higher than plain. 2. The bending rigidity change in DTY with increasing the twist was not significant, however in P/F it appeared apparently decreased with increasing the tlvist. Also, it appeared that when using P/F as weft the bending rigidity was higher than when using DTY and the twill structure appeared higher than the satin structure. 3. In shear force the increasing rates of plain and the twill were higher than satin. When DTY and P/F were used as weft, the shear force was higher in ITY and DTY than in P/F case. 4. Koshi appeared higher in the order of plain, twill and satin. When DTY and P/F were used as the weft Koshi increased with increasing the twist in plain, however in twill and satin it appeared to decrease. In hand value ITY(=7.5) appea.ed to be highe. than DTY and P/F(=6.5). 5. In all cases Shinayakasa decreased with increasing the twist. The hand values observed that satin was =4, twill was =3, and plain was =1.5. 6. Fukurami showed no significant change with increasing the twist in DTY, however in P/F and ITY it decreased.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.1 no.2
• /
• pp.144-153
• /
• 1991

This study was conducted to evaluate worker exposure to airborne asbestos fibers by industry, and to evaluate polarized-light microscopy for determining airborne asbestos fibers. A total of 11 plants including asbestos textile, brake-lining manufacturing, slate manufacturing, and automobile maintenance shops were investigated. Rsults of the study are summarized as follows. 1. Worker exposure levels to airborne asbestos fibers were the highest in asbestos textile industry, followed by brake-lining manufacturing, slate manufacturing, and automobile maintenance shops, in order. In asbestos textile industry, large variation of asbestos levels was found by plants. The worst plant indicated airborne fiber concentrations in excess of 10 fibers/cc, however, the best plant showed concentrations within 0.50 fibers/cc. 2. Characterization of airborne fibers by industry indicated that fibers from asbestos textile industry were the longest with the largest aspect ratio. Fibers from automobile maintenance shops were the shortest with the smallest aspect ratio. Based on characteristics of fibers and the highest levels of concentrations, it is concluded that workers in the asbestos textile industry are exposed to the highest risk of producing asbestosis, lung cancer, and mesothelioma. 3. Result s obtained using polarized-light microscopy were $43.7{\pm}12.3%$ of the results obtained using phase contrast microscopy. This may be resulted from the worse resolution of polarized-light microscopy than that of phase contrast microscopy. Based on the results, it is recommended that polarized-light microscopy be used for mainly bulk sample analyses and further study be performed to improve the method for determining airborne samples. However, polarized-light microscopy can be used for determining thick fibers.

• Journal of Korean Society on Water Environment
• /
• v.24 no.6
• /
• pp.801-805
• /
• 2008

A fibrous material (p-phenylene-2,5-benzobisoxazole, PBO) was used as an adsorbent for solid phase extraction in order to simplify the extraction procedure. The extraction performance for di-(2-ethylhexyl) phthalate (DEHP) was examined with two types of PBO fibers (HM (High modulus) and AS (Regular type) types) by batch type sorption/desorption experiments. When 100 mg of the HM fibers were applied to 20 mL of the aqueous DEHP solution (less than $50{\mu}g/L$), more than 95% of DEHP was adsorbed on the fibers, however, the AS type fibers adsorbed alkyl phthalate up to 80%. In the case of $50{\mu}g/L$ of the initial concentration of DEHP, the adsorbed DEHP was extracted effectively with methanol and the maximum overall recovery ratio was 92.3%. The results indicated that the PBO fibers could be used as an adsorbent for alkyl phthalate analysis, and that the extraction procedure was not affected by suspended solids in a water sample.

• Fire Science and Engineering
• /
• v.16 no.3
• /
• pp.48-55
• /
• 2002

This study presents a treatment of suitable flame retardant through evaluating fire performance after treating flame retardant of fibers for development of welding blanket. The experimental samples used were commercial fibers and we are treated fibers with the flame retardant liquid and the flame retardant paint. The fire performance of the sample was carried out according to the Korea and Japan Standard. As the results of the fire performance experiment, the treated fiber in samples had enough in the performance of flame and fire retardant and the grade of their was from grade A to grade C according to flame and fire retardant standard. The lower oxygen index indicated that all treated samples with the resist are satisfied with international standard. We con-sider that the welding blanket treated with grade A, B and C performance prevents fire spread regardless of the height of work stairs in the case of installation horizontally. Also, it is considered that the welding blanket treated with grade C performance prevents fire spread regardless of the height of work stairs in the case of installation vertically.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.1
• /
• pp.147-154
• /
• 2009

This paper presents a grating~integrated SPR (Surface Plasmon Resonance) sensor chip for simple and inexpensive biomolecule detection. The grating-integrated SPR sensor chip has two sensing channels having a nano grating for SPR coupling. An external mirror is used for multi channel SPR sensing. The present sensor chip replaces bulky and expensive optical components, such as fiber-optic switches or special shaped prisms, resulting in a simple and inexpensive wavelength modulated multi-channel SPR sensing system. We fabricate a SPR sensor chip integrated with 835 nm-pitch gratings by a micromolding technique to reduce the fabrication cost. In the experimental characterization, the refractive index sensitivity of each sensing channel is measured as $321.8{\pm}8.1nm$/RI and $514.3{\pm}8.lnm$/RI, respectively. 0.5uM of the target biomolecule (streptavidin) was detected by a $1.13{\pm}0.16nm$ shift of the SPR dip in the 10%-biotinylated sample channel, while the SPR dip in the reference channel for environmental perturbation monitoring remained at the same position. From the experimental results, multi-channel biomolecule detection capability of the present grating-integrated SPR sensor chip has been verified. On the basis of the preliminary experiments, we successfully measured the binding reaction rate for the $2\;nM{\sim}200\;nM$ monoclonal-antibiotin, thus verifying biomolecule concentration detectability of the present SPR sensor chip. The binding reaction rates measured from the present SPR sensor chip agredd well with those from a commercialized SPR sensor.

• Journal of the Korean Society of Costume
• /
• v.62 no.6
• /
• pp.200-217
• /
• 2012

The purpose of this research is to examine the specificity of grids to define the characteristics of clothes styles in the Joseon Dynasty period. The significance of examining of the specificity of grids is to find out arbitrary types of the features of grids involved in structuring the Jeogori in the Joseon Dynasty period one by one. The Visual Linguistic Theory was introduced as a methodological tool to exquisitely analyze the characteristics of grids in deep structures of Jeogori in the Joseon Dynasty period. This theory strives to examine sample distribution, the distribution of samples by quality and the distribution of the types of ploidy features. Through the examination, the results are as follows. The grid systems of the Jeogori consisted of diverse proportion systems reaching 86 cases, that is, sequence systems composed of multi-functional, multi-combined bodies. Most ornamental grids had feature angles distributed in a range of $2-20^{\circ}$ that showed a common preference for low sloped diagonal lines or small curvature. Although the preference for certain feature angles were prominent, the feature angles that were used were generally distributed evenly among diverse feature angles to show the characteristics of separation. Therefore, Jeogori makers in the Joseon Dynasty period can be considered as having experimented with many proportion systems to show their aesthetics. In conclusion, based on the results of the examination of feature distributions and related methods to allocate ploidy features, O-type accounted for 66% and thus it was identified that the Jeogori was characterized by O-type. Therefore, it was identified that the characteristic of the Jeogori in the Joseon Dynasty period consisted of O-type fractal structures which are formative structures unique to our nation.

• Polymer(Korea)
• /
• v.38 no.2
• /
• pp.171-179
• /
• 2014

Low temperature cure prepregs are being developed for use in the preparation of large-structured fiber-reinforced polymer (FRP) composites with good performance. Cure behavior and chemorheology of low temperature cure epoxy resin system, based on epoxy resin, curing agent, and accelerators, were investigated to provide a matrix resin suitable for the prepreg preparation. Characteristics of cure reaction were studied in both dynamic and isothermal conditions by means of differential scanning calorimetry and rheometry. The low temperature cure epoxy resin system suggested in this study as a matrix resin was curable at $80^{\circ}C$ for 3 h, and showed the gel times of 120 and 20 min at 80 and $90^{\circ}C$, respectively. Thermal and mechanical properties of the cured sample were almost the same as high temperature cure counterparts.