• Journal of The Korean Society of Grassland and Forage Science
• /
• v.34 no.4
• /
• pp.277-282
• /
• 2014

Nutritive value analysis of feed is very important for the growth of livestock, and ensures the efficiency of feeds as well as economic status. However, general laboratory analyses require considerable time and high cost. Near-infrared reflectance spectroscopy (NIRS) is a spectroscopic technique used to analyze the nutritive values of seeds. It is very effective and less costly than the conventional method. The sample used in this study was a corn kernel and the partial least square regression method was used for evaluating nutrient composition, digestibility, and energy value based on the calibration equation. The evaluation methods employed were the coefficient of determination ($R^2$) and the root mean squared error of prediction (RMSEP). The results showed the moisture content ($R^2_{val}=0.97$, RMSEP=0.109), crude protein content ($R^2_{val}=0.94$, RMSEP=0.212), neutral detergent fiber content ($R^2_{val}=0.96$, RMSEP=0.763), acid detergent fiber content ($R^2_{val}=0.96$, RMSEP=0.142), gross energy ($R^2_{val}=0.82$, RMSEP=23.249), in vitro dry matter digestibility ($R^2_{val}=0.68$, RMSEP=1.69), and metabolizable energy (approximately $R^2_{val}$ >0.80). This study confirmed that the nutritive components of corn kernels can be predicted using near-infrared reflectance spectroscopy.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.2
• /
• pp.165-171
• /
• 2015

Dust samples collected from air in metropolitan areas of Busan and Ulsan were analyzed by phase contrast microscopy, phase contrast dispersion microscopy and SEM. Asbestos concentration in dust samples was lower than detection limit. Many fibrous materials were observed in dust samples, but most of them were organic fibers. Inorganic fibers such as rock fiber, ceramic fiber and gypsum were contained in the samples and non-fibrous minerals such as quartz, calcite and feldspar were also occasionally observed. Domestic law requires that asbestos in air dust is mainly analyzed by phase contrast microscopy. From this study, however, precise analysis of asbestos was almost impossible by this method only. As indicated in JIS method of Japan, therefore, count and identification of asbestos were more efficient by dispersion staining method after removing organic materials in samples by low temperature incinerator.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.6
• /
• pp.979-985
• /
• 2001

A fluorometric detection technique for HDL (High Density Lipoprotein) and LDL (Low Density Lipoprotein) was developed for application in a fiber-optic immunosensor using a protein A Langmuir-Blodgget (LB) film. For the fluorescence immunoassay, antibodies specific to HDL or LDL were imobilied on the protein A LB film, and a fluorescence amplification method was developed to overcome their weak fluorescence. The deposition of protein A using the LB technique was monitored using a surface pressure-are $({\pi}-A)$ curve, and the antibody immobilization of the protein A LB film was experimentally verified. The immobilized antibody was used to separate only HDL and LDL from a sample, then the fluorescence of he separated HDL or LDL was amplified. The amount of LDL or HDL was measured using the developed fiber optic fluorescence detection system. The optical properties resulting from the reaction of HDL or LDL with o-phtaldialdehyde, detection range, response time, and stability of the immunoassay were all investigated. The respective detection ranges for HDL and LDL were sufficient to diagnose the risk of coronary heart disease. The amplification step increased the sensitivity, while selective separation using the immobilized antibody led to linearity in the sensor signal. The regeneration of the antibody-immobilized substrate could produce a stable and reproducible immunosensor.

• Analytical Science and Technology
• /
• v.14 no.5
• /
• pp.392-399
• /
• 2001

The analysis of n-butylbenzene and 1,2-dibromo-3-chloropropane (DBCP) as volatile organic compounds in biota samples was performed by gas chromatography/mass spectrometry-selected ion monitoring mode. The target compounds, n-butylbenzene and DBCP, in biota samples were extracted by headspace solid phase microextraction (SPME) with $100{\mu}m$ polydimethyl siloxane (PDMS) fiber and purge & trap method. The extraction recoveries of these compounds obtained by SPME was 85.8% for n-butylbenzene and 92.4% for DBCP, respectively. Each value of method detection limit were $0.15{\mu}g/kg$ and $0.05{\mu}g/kg$, respectively. While in the case of purge & trap method, the extraction recovery was 115.2% for n-butylbenzene, 80.9% for DBCP and method detection limit were $0.04{\mu}g/kg$ and $0.70{\mu}g/kg$, respectively. The extraction yields and detection limits of these compounds obtained by purge & trap were equivalent to those by SPME.

• Analytical Science and Technology
• /
• v.7 no.3
• /
• pp.301-313
• /
• 1994

X-Ray Photoelectron Spectroscopy(XPS) and Rutherford Backscattering Spectroscopy(RBS) are used for the analysis of additives, examination of chemical structure and determination of identity with qualitative and quantitative analysis of surface elements, binding energy level and depth profiling in the surface. We analyzed surface of polyethylene, acrylonitrile butadien rubber, polypropylene, glass, fiber and paper treated with $XeF_2$ or C-F plasma by XPS and RBS. It was found that fluoro element was penetrated to sample surface and the distribution of surface elements are different than untreated samples.

• Journal of the Optical Society of Korea
• /
• v.15 no.3
• /
• pp.293-299
• /
• 2011

In this study, we demonstrated Fourier-domain/swept-source optical coherence tomography (FD/SS-OCT) at a center wavelength of 800 nm for in vivo human retinal imaging. A wavelength-swept source was constructed with a semiconductor optical amplifier, a fiber Fabry-Perot tunable filter, isolators, and a fiber coupler in a ring cavity. Our swept source produced a laser output with a tuning range of 42 nm (779 to 821 nm) and an average power of 3.9 mW. The wavelength-swept speed in this configuration with bidirectionality is 2,000 axial scans per second. In addition, we suggested a modified zero-crossing method to achieve equal sample spacing in the wavenumber (k) domain and to increase the image depth range. FD/SS-OCT has a sensitivity of ~89.7 dB and an axial resolution of 10.4 ${\mu}m$ in air. When a retinal image with 2,000 A-lines/frame is obtained, an acquisition speed of 2.0 fps is achieved.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.1
• /
• pp.47-52
• /
• 2011

It is well known that stiffness of composites depends on layup sequence of CFRP(carbon fiber reinforced plastics) laminates because the layup of composite laminates influences their properties. Ultrasonic NDE of composite laminates is often based on the backwall echoes of the sample. A pair of such transducers was mounted in a holder in a nose-to-nose fashion to be used as a scanning probe on composites. Miniature potted angle beam transducers were used (Rayleigh waves in steel) on solid laminates of composites. Experiments were performed to understand the behavior of the transducers and the nature of the waves generated in the composite (mode, wave speed, angle of refraction). C-scan images of flaws and impact damage were then produced by combining the pitch-catch probe with a portable manual scanner known as the Generic Scanner ("GenScan"). The pitch-catch signal was found to be more sensitive than normal incidence backwall echo of longitudinal wave to fiber orientation of the CFRP composites, including low level porosity, ply waviness, and cracks. Therefore, it is found that the experimentally Rayleigh wave variation of pitch-catch ultrasonic signal was consistent with numerical results and one-side ultrasonic measurement might be very useful to detect the defects.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.5
• /
• pp.533-538
• /
• 1996

The rate and extent of digestion of dietary carbohydrates has a tremendous impact on ruminal fermentation and the productivity of the animals. The objective of the study was to determine the dry matter (DM) and neutral detergent fiber (NDF) degradabilities and rate and extent of feed byproducts (cotton seed cake, wheat bran), legumes [berseem (Egyptian clover), lucern (Medicago sativa), cowpeas (Vigna sinensis)], grasses [maize (Zea mays), millet (Panicum miliaceum), sorghum (Sorghum vulgare)] and wheat straw in ruminally fistulated male buffalo calves. By using nylon bags, 10 grams sample was exposed to the ruminal fermentation for 0, 1, 2, 4, 6, 10, 16, 24, 36, 48 and 96 hours. Dry matter and NDF degradability was measured at 48 hours. Extent of DM and NDF disappearance was determined at each time point. Rates of disappearance of DM and NDF were determined by regressing the natural logarithm of the percentage of original DM and NDF remaining in the bags between 1 and 96 hours. The dry matter digestibility (DMD) of the feed byproducts (FBP) and legume forages when incubated in the rumen of male buffalo calves were greater (p < 0.05) than grasses. Extent of digestion followed similar pattern as DMD. Rate of DMD was higher in FBP than in legumes and was the lowest in the wheat straw. The NDF degradability (NDFD) of FBP, legumes and grasses did not differ, however, wheat straw had the lowest NDFD from all the feeds tested. The lowest NDFD of wheat straw may have been due to the depressing effect of lignin on fiber digestion. The FBP and legumes had higher (p < 0.05) rates and lower extents of NDF digestion than grasses.

• The Korean Journal of Community Living Science
• /
• v.25 no.1
• /
• pp.5-18
• /
• 2014

This study examines the changes in the physicochemical property and antioxidant activity of six types of vegetables (carrots, crown daisy, mugwort, cabbages, onions, and garlic) based on heat-treated cooking. According to the results, proximate contents (crude protein, fat, and ash) were lower in blanched samples than in untreated samples. Untreated cabbages showed the highest level of total dietary fiber content, which decreased by blanching and increased by high-temperature/high-pressure (HTHP) treatment. Noteworthy is that, in the case of soluble dietary fiber, blanched crown daisy and mugwort showed significantly high levels of 12.0 g and 7.3 g per 100 g(dry basis). There was no significant change in tocopherol content in heat-treated samples. The highest levels of total polyphenol and flavonoid content were 6.73 g and 5.51 g per 100 g, respectively, in the mugwort sample with HTHP treatment at $130^{\circ}C$ for 2 h. The water extract of mugwort with HTHP treatment had the strongest antioxidant effect based on three bioassays (SOD, DPPH, and ABTS). These results indicate the relative correlation between the level of physiologically active content and antioxidant activity and suggest new insights into ingredients for developing functional foods.

• Composites Research
• /
• v.26 no.6
• /
• pp.355-362
• /
• 2013

Carbon particle based nanocomposites have been studied. Nanocomposites containing CNT and graphite particles were manipulated by aligning the micro/nano-size particles with electric field. Electric field is applied to the suspension of epoxy matrix and particulate inclusions in order to align them along the direction of the electric field. Particles aligned in a uniform direction act as a fiber in a CFRP composite. The mechanical strength and physical characteristics highly depend on particles' distribution pattern and amount. In this study, the characteristics of radioactive barrier are emphasized, which has been rarely discussed in the literature. A number of sample coupons were tested to verify their performance. The procedure of manufacturing nanocomposites by means of extremely small size particle alignment is presented in sequence. Several physical and structural performances of composites containing aligned and randomly distributed particles were compared. The results show particle alignment is very effective to enhance directional strength and radioactive barrier performance.