• 한국세라믹학회지
• /
• 제39권12호
• /
• pp.1158-1163
• /
• 2002

2차 비선형 광특성을 유도하기 위한 UV 폴링용 Ge와 B가 첨가된 광민감성 광섬유를 제조하였다. 248 nm KrF 엑시머 레이저 조사에 의하여 수소처리 없이 장주기 격자를 형성할 수 있었다. 116 mJ/$cm^2$의 펄스 에너지와 10 Hz의 조사 빈도로 1분간 광민감성 광섬유에 레이저를 조사할 경우 -4 dB의 큰 band rejection 특성을 얻을 수 있었다. 제조된 광섬유의 광민감성은 장주기 격자쌍 방법을 이용하여 측정하였으며, 8.67 kJ/$cm^2$의 fluence로 KrF 엑시머 레이저를 조사할 경우 3.3${\times}10^{-3}$의 큰 코어 굴절률 변화를 얻었다. 또한 UV 폴링 시에 광섬유 코어에 고전압을 쉽게 인가할 수 있는 H자 형상의 광섬유를 인출조건의 최적호를 통하여 제조하였다.

• 대한전자공학회논문지TC
• /
• 제43권3호
• /
• pp.27-31
• /
• 2006

Millimeter over Fiber (MMoF) 기법은 저손실로 장거리에 신호를 전송하기 위하여 밀리미터 대역의 신호를 광학적으로 변조하여 광섬유에 실어서 전송하는 기법이다. 이때 광학적 변조 기법으로는 색 분산(chromatic dispersion)이 적고 대역폭 효율이 뛰어난 광학적 단측파대 변조 (Optical Single sideband; OSSB) 방식이 주로 사용된다. OSSB를 사용하는 MMoF 시스템의 광학 연결부는 비선형 증폭기로 취급될 수 있으며, 그것의 AM/AM 특성 함수는 제 1차 제 1종 베셀 함수이다. 본 논문에서는 이를 고려한 OFDM MMoF 시스템의 성능을 알아보았다. 우리는 OFDM MMoF 시스템의 비선형 왜곡 잡음 전력을 추정하여 이론적인 비트 오율(Bit Error Rate; BER)을 분석하였으며, 모의실험을 통해 이를 검증하였다.

• Current Optics and Photonics
• /
• 제5권3호
• /
• pp.250-260
• /
• 2021

A tapered As₂S₃ photonic crystal fiber (PCF) with four layers of air holes in a hexagonal array around the core is designed in this paper. Numerical simulation shows that the dispersion D decreases and the nonlinearity coefficient γ increases from the thick to the thin end along the tapered PCF. We simulate the midinfrared pulse compression in the tapered As₂S₃ PCF using the adaptive split-step Fourier method. Initial Gaussian pulses of 4.4 ps and a central wavelength of 2.5 ㎛ propagating in the tapered PCF are located in the anomalous dispersion region. With an average power of assumed input pulses at 3 mW and a repetition frequency of 81.0 MHz, we theoretically obtain a pulse duration of 56 fs and a compression factor of 78 when the pulse propagates from the thick end to the thin end of the tapered PCF. When confinement loss in the tapered PCF is included in the simulation, the minimum pulse duration reaches 72 fs; correspondingly, the maximum compression factor reaches 61. The results show that in the anomalous-dispersion region, midinfrared pulses can be efficiently compressed in a dispersion-decreasing and nonlinearity-increasing tapered As₂S₃ PCF. Due to confinement loss in the tapered fiber, the efficiency of pulse compression is suppressed.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 하계학술발표회 논문집
• /
• pp.411-412
• /
• 2008

The chromatic dispersion of the germano-silicate optical fiber incorporated with Si nanocrystals was determined with the aid of simulation and demonstrated using experiments, which showed dependence of the launched power and the pump wavelength due to optical nonlinearity of the fiber.

• Journal of information and communication convergence engineering
• /
• 제14권3호
• /
• pp.147-152
• /
• 2016

In radio-over-fiber (RoF) systems, nonlinear compensation is essential to improve performance. Among the several existing nonlinear compensation techniques, we investigate a predistortion technique for a directly modulated laser in an RoF system. First, we obtain the input-to-output response of a directly modulated laser at 160, 820, and 1,540 MHz. The results show that the laser response is dependent on the frequency band. Second, we design an optimal predistortion circuit to compensate for the nonlinear responses of three frequency bands. We design the predistortion circuit with two options: each predistortion circuit for each frequency band and one single predistortion circuit for all the three frequency bands. Finally, we present the simulation results of the predistortion system obtained using a commercial simulator. These results show that the third intermodulation distortion (IMD3) is improved by 0.6-9 dB for the three frequency bands with only a single predistortion circuit.

• 전기학회논문지
• /
• 제60권4호
• /
• pp.823-828
• /
• 2011

We have systematically designed and experimentally demonstrated the opto-electrical predistortion optical transmitter using microwave circuit modelling for reducing the nonlinearity of the distributed-feedback laser diode (DFD-LD). The DFB-LD is analyzed using microwave circuits model based on rate equations. Through the system-level simulation for predistortion method, the optimized characteristics of the RF components in the system are confirmed. The simulated and experimental results show the reduced distortion products. These results are analyzed as the evaluation parameters for the miniaturization and optimization of the opto-electrical predistortion method in radio-over-fiber systems.

• Journal of the Optical Society of Korea
• /
• 제17권4호
• /
• pp.312-316
• /
• 2013

A novel fiber-optic sensor system is suggested in which fiber Bragg grating sensors are demodulated by a wavelength-sweeping fiber laser source and a spectrometer. The spectrometer consists of a diffraction grating and a 512-pixel photo-diode array. The reflected Bragg wavelength information is transformed into spatial intensity distribution on the photo-diode array. The peak locations linearly correspond to the Bragg wavelengths, regardless of the nonlinearities in the wavelength tuning mechanism of the fiber laser. The high power density of the fiber laser enables obtaining high signal-to-noise ratio outputs. The improved demodulation characteristics were experimentally demonstrated with a fiber Bragg grating sensor array with 5 gratings. The sensor outputs were in much more linear fashion compared with the conventional tunable band-pass filter demodulation. Also it showed advantages in signal processing, due to the high level of photo-diode array signals, over the broadband light source system, especially in measurement of fast varying dynamic physical quantities.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.129-132
• /
• 2001

Fiber waviness is one of manufacturing defects encountered frequently in thick composite structures. It affects significantly on the behavior as well as strength of thick composites. The effects of fiber waviness on tensile/compressive nonlinear elastic behavior and strength of thick composite with fiber waviness are studied theoretically and experimentally. FEA(Finite Element Analysis) models are proposed to predict tensile/compressive nonlinear behavior and strength of thick composites. In the FEA models, both material and geometric nonlinearities were incorporated into the model using energy density, iterative mapping and incremental method. Also Tsai-Wu criteria was adopted to predict the strength of thick composites with fiber waviness. Tensile and compressive tests were conducted on the specimens with uniform fiber waviness. It was observed that the degree of fiber waviness in composites significantly affected the nonlinear behavior and strength of the composites

• 대한기계학회논문집
• /
• 제17권12호
• /
• pp.2915-2925
• /
• 1993

A finite element program using degenerated shell element was developed to solve the geometric, material and combined nonlinear behaviors of composite laminated plates. The total Lagrangian method was implemented for geometric nonlinear analysis. The material nonlinear behavior was analyzed by considering the matrix degradation due to the progressive failure in the matrix and matrix-fiber interface after initial failure. The results of the geometric nonlinear analyses showed good agreements with the other exact and numerical solutions. The results of the combined nonlinear analyses considered both geometric and material nonlinear behaviors were compared to the experiments in which a concentrated force was applied to the center of the square laminated plate with clamped four edges.

• Advanced Composite Materials
• /
• 제18권3호
• /
• pp.265-285
• /
• 2009

Off-axis compressive deformation behavior of a unidirectional CFRP laminate at high temperature and its strain-rate dependence in a quasi-static range are examined for various fiber orientations. By comparing the off-axis compressive and tensile behaviors at an equal strain rate, the effect of different loading modes on the flow stress level, rate-dependence and nonlinearity of the off-axis inelastic deformation is elucidated. The experimental results indicate that the compressive flow stress levels for relatively larger off-axis angles of $30^{\circ}$, $45^{\circ}$ and $90^{\circ}$ are about 50 percent larger than in tension for the same fiber orientations, respectively. The nonlinear deformations under off-axis tensile and compressive loading conditions exhibit significant strain-rate dependence. Similar features are observed in the fiber-orientation dependence of the off-axis flow stress levels under tension and compression and in the off-axis flow stress differential in tension and compression, regardless of the strain rate. A phenomenological theory of viscoplasticity is then developed which can describe the tension-compression asymmetry as well as the rate dependence, nonlinearity and fiber orientation dependence of the off-axis tensile and compressive behaviors of unidirectional composites in a unified manner. It is demonstrated by comparing with experimental results that the proposed viscoplastic constitutive model can be applied with reasonable accuracy to predict the different, nonlinear and rate-dependent behaviors of the unidirectional composite under off-axis tensile and compressive loading conditions.