• 한국구조물진단유지관리공학회 논문집
• /
• 제22권6호
• /
• pp.157-163
• /
• 2018

본 연구는 기존에 사용되어 지고 있는 타설 노즐 내부에 블레이드를 설치함으로써 타설 시 시멘트 복합체에 혼입된 섬유의 방향성을 제어하고 동시에 분포도를 향상시키고자 하였다. 블레이드 변수 최적화를 위하여 시멘트계 매트릭스 재료의 유동과 혼입된 섬유의 운동, 노즐간의 상호작용을 고려한 다중물리계 유한요소해석을 수행하였다. 사용되는 섬유길이를 변수로 하여 블레이드의 간격, 길이, 위치를 결정하였다. 내부 블레이드 간격이 섬유길이의 약 1.2~2.4배, 블레이드 길이는 섬유길이의 약 4~8배, 설치 위치는 시멘트 복합체가 도출되는 입구에서부터 섬유길이의 14배 이하일 때 섬유 방향각이 약 $15^{\circ}$이하로 제어되었다. 또한, 본 연구에서 제시된 블레이드형 노즐은 기존의 섬유보강 시멘트 복합체 타설장비와 타설관을 그대로 사용하면서, 탈 부착식으로 제작될 수 있어 사용성과 편의성을 동시에 제공할 수 있을 것으로 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.333-336
• /
• 2005

This paper presents a comparative evaluation of eight different types of steel fibers used as reinforcing material in concrete beams. The fibers which used ultra-strength steel fiber reinforced concrete were fiber length of 30 to 60mm, aspect ratio of 43 to 86, W/B ratio 0.16 to 0.30, fiber types of both ends hooked and straight shape and fiber volume fraction of 1 to 5$\%$. As for the test results, it estimated the influence of fiber volume, length and aspect ratio on the mechanical properties of high toughness concrete, the mechanical properties improved according to increase fiber volume, to increase aspect ratio and to long fiber length. And the resonable fiber volume in high toughness concrete was analyzed 2$\%$ based on the results of mechanical properties.

• Current Optics and Photonics
• /
• 제7권1호
• /
• pp.47-53
• /
• 2023

We propose a centralized passive-optical-network monitoring scheme using the resonance-spectrum properties of a Fabry-Perot cavity based on fiber Bragg gratings. Each cavity consists of two identical uniform fiber Bragg gratings and a varying cavity length or grating length, which can produce a unique single-mode resonance spectrum for the drop-fiber link. The output spectral properties of each cavity can be easily adjusted by the cavity length or the grating length. The resonance spectrum for each cavity is calculated by the transfer-matrix method. To obtain the peak wavelength of the resonance spectrum more accurately, the effective cavity length is introduced. Each drop fiber with a specific resonance spectrum distinguishes between the peak wavelength or linewidth. We also investigate parameters such as reflectivity and bandwidth, which determine the basic performance of the fiber Bragg grating used, and thus the output-spectrum properties of the Fabry-Perot cavity. The feasibility of the proposed scheme is verified using the Optisystem software for a simplified 1 × 8 passive optical network. The proposed scheme provides a simple, effective solution for passive-optical-network monitoring, especially for a high-density network with small end-user distance difference.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권1호
• /
• pp.13-18
• /
• 2006

Two different animal models, which differ in whether or not taking maternal genetic effect into account, for estimating genetic parameters of cashmere weight, live body weight, cashmere thickness, staple length, fiber diameter, and fiber length in Inner Mongolia White Cashmere Goat were compared via likelihood ratio test. The results indicate that maternal genetic effect has significant influence on live body weight and cashmere thickness, but no significant influence on the other traits. Using models suitable for each trait, both genetic parameters and trends were analyzed with the MTDFREML program. Heritability estimates from single trait models for cashmere weight, live body weight, cashmere thickness, staple length, fiber diameter and fiber length were found to be 0.30, 0.07, 0.21, 0.29, 0.28 and 0.21, respectively. Genetic correlation estimates from two-trait models between live body weight and all other traits (-0.06~0.07) was negligible, as were those between fiber diameter and all other traits (-0.01~0.03) except cashmere thickness (0.19). Cashmere weight and staple length had moderate to low genetic correlations with other traits (-0.24~0.39 and -0.24~0.34, respectively) except for live body weight and fiber diameter. Cashmere thickness had a strong genetic correlation with fiber length (0.81), and low genetic correlation with other traits (0.19~0.34) except live body weight. Genetic trend analysis suggests that selection for cashmere weight was very effective, which has led to the slow genetic progress of cashmere thickness and fiber length due to their genetic correlations with cashmere weight. The selection for live body weight was not effective, which was consistent with its low inheritability.

• 한국환경보건학회지
• /
• 제22권2호
• /
• pp.43-57
• /
• 1996

To characterize worker's exposure to glass fibers, to find the correlation between airborne total dust concentrations and fiber concentrations and to recommend an appropriate evaluation method for worker's exposure to fibrous dusts in glass wool industry, we carried out this study. Average respirable fiber levels at five factories were 0.013-0.056 f/cc, and fairly below the OSHA PEL, 1 f/cc. A factory showed the lowest airborne fiber level, 0.013 f/cc, which was different significantly from those of other factories of which average fiber concentration was 0.046 f/cc. The cutting and grinding operations of insulation products resulted in higher airborne fiber cocentrations than any other processes(p<0.05). To characterize airborne fiber dimension, fiber length and diamter were determined using phase contrast microscope. The geometric means of airborne fiber lengths were $42-105 \mu m$. One factory had airborne fibers whose length distribution(GM = $105 \mu m$) was different from those of other factories(GM = $42-50 \mu m$). The percentages of respirable fibers less thinner than 3 gm were 38.9-90.9% at four factories, and two factories of them had the higher percentages than others. The findings explain for variation of airborne fiber diameters between factories. On the other hand, between the processes were the difference of fiber-length distributions observed. The cutting and grinding operations showed shorter fiber-length distributions than the fiber forming one. However, fiber-diameter distributions or respirable fiber contents were similar in all processes. The airborne fiber concentrations and the dust concentrations had relatively weak correlation(r=0.25), thus number of fibers couldn't be expected reliably from dust amount. Fiber count is appropriate for assessing accurate exposures and health effects caused by fibrous dusts including glass fibers. Ministry of Labor have established occupational exposure limit to glass fibers as nuisiance dust, but should establish it on the basis of respirable fiber concentration to provide adequate protection for worker's health

• 펄프종이기술
• /
• 제34권5호
• /
• pp.56-62
• /
• 2002

Alternative way of shaping fibers suitable for papermaking was introduced. Impact refining, which was done simply by hitting wet fibers with a metal weight vertically, was intended to keep the fibers from shortening and to cause mostly internal fibrillation. Virgin chemical pulp, its recycled one and OCC were used in the experiment. It was noticed from the experiment that impact refining on virgin chemical pulp kept the fiber length and increased bonding properties greatly. However, in the recycled fibers from the chemical pulp, fiber length and bonding properties were decreased. In OCC, which seems to contain fractions of semi-chemical pulp and mechanical pulp (GP), and which is recycled pulp from corrugated boxes, fiber length and bonding properties were decreased disastrously. We believe recycled cellulosic fibers (recycled chemical pulp and OCC in this case), which went through hornification, were less resistant to the mechanical impact than virgin chemical pulp. For virgin chemical pulp, impact refining allowed no significant fiber length shortening, high WRV, and high mechanical strength.

• 한국산학기술학회논문지
• /
• 제17권5호
• /
• pp.80-85
• /
• 2016

탄소섬유강화 복합재는 기계적 물성이 우수하여 다양한 산업분야에서 활용되고 있으나 섬유길이가 짧은 단섬유 형태로 함침 되고 있어 강도와 강성을 증대시키는데 한계가 있다. 이를 보완하기 위한 LFT-D성형은 탄소 또는 유리섬유를 열가소성 수지와 혼합하여 압출 후 프레스 성형하여 제품을 만드는 공법으로 연속공정이 가능하고 사출성형에 비해 생산성이 높아 자동차 구조용 부품을 제작하는데 사용할 수 있다. 본 연구에서는 LFT-D공법으로 성형된 탄소 장섬유강화 열가소성 복합소재의 기계적 특성을 파악하기 위하여 탄소 장섬유의 함침과 압출공정을 수행할 수 있는 Lab scale의 소형 압출기 시스템을 제작하였다. Lab scale의 소형 압출기를 사용하여 제작된 탄소 장섬유 복합소재를 프레스 성형하여 시편을 제작하고 재료의 기계적 특성을 평가한 결과, 탄소섬유길이, 프레스 가압압력 및 탄소섬유 함유량이 복합소재의 강도 및 강성의 증가에 영향을 미침을 알 수 있었다. 향후 탄소 장섬유 복합소재의 기계적 성질 향상을 위해서 혼합 스크류 설계, 탄소 섬유코팅 등에 대한 추가적인 연구가 필요하다.

• 펄프종이기술
• /
• 제37권2호
• /
• pp.1-10
• /
• 2005

Removal of fines from fiber furnish by fractionation improves drainage, but decreases fiber bonding in paper. Fines can be again classified by their size such as the fines that passed 150 and 400 mesh screen, respectively. A hypothesis of different properties between these two kinds of fines was tested. Four different furnishes (SwBKP, HwBKP, KOCC, and BCTMP) were refined in two levels, and all their furnish and handsheet properties were compared in respect of their fines. KOCC fines gave the slowest drainage and least contribution to breaking length while BCTMP fines the fastest drainage and the highest contribution to breaking length. Removal of the fines that passed 400 mesh screen gave high improvement in drainage and large decrease in breaking length. Only KOCC fines removal gave more positive results where there were large improvement in drainage but only small decrease in breaking length.

• Computers and Concrete
• /
• 제17권4호
• /
• pp.553-566
• /
• 2016

Fracture energy is one of the key parameters reveal cracking resistance and fracture toughness of concrete. The main purpose of this study is to determine fracture behavior, mechanical properties and microstructural analysis of high strength basalt fiber reinforced concrete (HSFRC). For this purpose, three-point bending tests were performed on notched beams produced using HSFRCs with 12 mm and 24mm fiber length and 1, 2 and $3kg/m^3$ fiber content in order to determine the value of fracture energy. Fracture energies of the notched beam specimens were calculated by analyzing load versus crack mouth opining displacement curves by the help of RILEM proposal. The results show that the effects of basalt fiber content and fiber length on fracture energy are very significant. The splitting tensile and flexural strength of HSFRC increased with increasing fiber content whereas a slight drop in flexural strength was observed for the mixture with 24mm fiber length and $3kg/m^3$ fiber content. On the other hand, there was no significant effect of fiber addition on the compressive strength and modulus of elasticity of the mixtures. In addition, microstructural analysis of the three components; cement paste, aggregate and basalt fiber were performed based on the Scanning Electron Microscopy and Energy-Dispersive X-ray Spectroscopy examinations.

• 한국터널지하공간학회 논문집
• /
• 제13권1호
• /
• pp.71-82
• /
• 2011

본 논문에서는 강섬유 형상에 따른 인발력 거동에 대한 연구를 수행하였다. 최적의 강섬유 형상을 도출하기 위하여 매입 된 강섬유가 이루는 각도와 길이를 변화시켜가며 인발실험을 시행하였다. 또한 인발실험 결과를 모사하기 위해 수치 해석을 수행하였다. 그 결과 강섬유 형상에 있어서 hook 각도와 설치각도 클수록 인발력이 뛰어나며, 특히 강섬유의 길이가 짧아짐에 따라 인발력도 뛰어난 것으로 판단되어졌다.