• The Journal of Dong Guk Oriental Medicine
• /
• v.9
• /
• pp.35-49
• /
• 2000

Purpose: This study is to investigate the alleviation effects of Daebangpoongtang in LPS induced arthritis in mice knee joint. Methods : Daebangpoongtang was chosen to treat the arthritis caused by injecting $300{\mu}g/kg$ LPS to mice knee joint. The control group had no treatment, while the LPS group was injected $300{\mu}g/kg$ LPS to mice knee joint and the DBP group was oral administrated of Daebangpoongtang. After injection of $300{\mu}g/kg$ LPS to mice knee joint, the alteration of synovial lining cell, vessel, fibrosis, distribution of collagen fiber, fibroblast, mast cell, infiltration of inflammation component cell and distribution of ICAM and VCAM was observed by light microscope(BX50). Results : In the DBP extract treatment group, the distribution of vessel, the enlargement of synovial lining cell layer, the synovial lining cells with filopodia, the fibrosis, the distribution of fibroblast in synovial membrane, the distribution of TCAM and VCAM on the knee joint was less than that of LPS group. Infiltrated lymphocyte into the apical surface had not observed in the DBP extract treatment group. The distribution of mast cell was as same as control group(no treatment group) and it showed granulated type. Conclusion: According to the above results, it might be considered that the administration of Daebangpoongtang has a curative effect on synovial membrane injury in arthritis by inhibiting increase of vessel, cell adhesion molecule(ICAM and VCAM) in LPS induced arthritis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.11
• /
• pp.891-899
• /
• 2013

This paper suggests a test and evaluation procedure of conformal load-bearing antenna structure(CLAS) for high speed military jet application. A log periodic patch type antenna was designed for multi-band communication and navigation antenna. Carbon/Glass fiber reinforced polymer was used as a structure supporting aerodynamic loads and honeycomb layer was used to improve antenna performance. Multi-layers were stacked and cured in a hot temperature oven. Gain, VSWR and polarization pattern of CLAS were measured using anechoic chamber within 0.15~2.0 GHz frequency range. Tension, shear, fatigue and impact load test were performed to evaluate structural strength of CLAS. Antenna performance test after every structural strength test was conducted to check the effect of structural test to antenna performance. After the application of new test and evaluation procedure to validate a new CLAS, a design improvement was found.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.3
• /
• pp.221-228
• /
• 2001

This study was carried out to investigate the effect of germination condition and drying temperature on growth and physicochemical properties of brown rice. Three brown rice seeds of Ilpumbyeo, Dasanbyeo and Heugjinjubyeo were stored at room temperature for six weeks to test the time-sequence germination viability. Relatively stable germination ratio was maintained until 2 weeks after storage. However, 3 weeks after storage, germination ratio of brown rice seeds started to decrease rapidly and their germination ratio was lower than 80%. For this reason, brown rice was recommended for seeding within 2 weeks after hulling. During the initial 5 days, germination ratio of 24 hours pre-soaking brown rice was higher about 2-3% than that of non-soaking brown rice. The $25^{\circ}C$ was considered as the most favorable temperature for brown rice germination, because of the high germination ratio and desirable coleoptile growth of the brown rice, and little seed rotting symptoms. The scanning electron micrographs showed the structural differences between hot-air dried and freeze dried germinated-brown rice kernel. In the freeze dried germinated-brown rice, seed coat (pericarp, tegmen and aleurone layer) was mechanically disrupted from the endosperm, and many cleavages were observed among starch storing cells and starch granules. The endosperm of freeze-dried brown rice kernels formed the sponge-like structures and showed the fragile traits. For this reason, hot-air drying is considered as more suitable method than freeze drying for germinated-brown rice. The crude protein and amylose contents were slightly changed, but there were no significant differences during the germination period. Crude fiber content was decreased, but crude Int and total amino acid contents were increased as seeding days increased. A rapid increase in $\alpha$-amylase activities of germinating brown rice was observed at S days after seeding, and $\alpha$-amylase activities were decreased from 8 days after seeding. Total free sugar contents were decreased during the germination period. There was continuous decline in the contents of sucrose and glucose until 8 days after seeding, but fructose and maltose content were gradually increased from the 5 days after seeding.

• Korean Journal of Poultry Science
• /
• v.13 no.1
• /
• pp.49-55
• /
• 1986

In order to study the effects of probiotic and antibiotic on the performance of the chickens and the population of microfloras in the intestine, a feeding trial was conducted for a period of seven weeks. One hundred eighty hatched male chickens of layer attain were fed one of the following three experimental diets; nonmedicated control, antibiotic supplemented diet(virginiamycin 5 ppm) and probiotic supplemented diet. Birds fed probiotic supplemented diets were heavier and consumed more feed than those fed other diets but the differences were not statistically significant. Antibiotic supplemented group showed significantly (P〈0.01) better feed efficiency than other groups. Availabilities of dry matter, crude protein, crude fat, NFE, Ca and P were not significantly different between treatments but antibiotic supplemented group showed significantly(P〈0.05) lower availability of crude fiber than other groups. The weight of small intestine of the birds fed antibiotic supplemented diet was significantly (P〈0.05) lighter than those of other groups. The population of Bacillus subtilis and Lactobacilli in the intestinal content of the birds fed probiotic supplemented diet were significantly (P〈0.01) larger than those of other groups. On the other hand, the population of Coliforms in the probiotic group were significantly (P〈0.01) smaller than those in the nonmedicated control group.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.3
• /
• pp.208-212
• /
• 1993

Since ramie suckers distribute soil surface layer within 10cm depth, some of them are dead from low soil temperature in winter. An experiment was conducted to investigate the effects of various mulching methods on safe overwintering of sucker at three or four years old, fully-grown ramie plots. The sprouting dates of ramie was March 28 in transparent vinyl mulching(TPEF), April 1 in transparent vinyl mulching over cover of straw, manure or rice hull at the amount of 500kg /10a (CM), and April 6 in black vinyl mulching(BDEF). These treatments showed earlier sprouting date from 9 to 18 days than the conventional mulching with 1000 kg straw /10a the sprouting date of which was April 15. TPEF treatment showed the earliest but ununiform sprouting. In contrast, sprouts in CM treatment was uniform but emerged somewhat later compared with the treatment of TPEF. The number of stems per unit area increased 50 percent more in TPEF, and 35 to 39 percent more in CM than the treatment of conventional mulching.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.346-351
• /
• 2018

Metal three-dimensional (3D) printing technologies are mainly classified as powder bed fusion (PBF) and direct energy deposition (DED) methods according to the method of application of a laser beam to metallic powder. The DED method can be used to fabricate fine and hard 3D metallic structures by applying a strong laser beam to a thin layer of metallic powder. The PBF method involves slicing 3D graphics to be a certain height, laminating metal powders, and making a 3D structure using a laser. While the DED method has advantages such as laser cladding and metallic welding, it causes problems with low density when 3D shapes are created. The PBF method was introduced to address the structural density issues in the DED method and makes it easier to produce relatively dense 3D structures. In this paper, thin lines were produced by using PBF 3D printers with stainless-steel powder of roughly $30{\mu}m$ in diameter with a galvano scanner and fiber-transferred Nd:YAG laser beam. Experiments were carried out to find the optimal conditions for the width of a line depending on the processing times, laser power, spot size, and scan speed. The optimal conditions were two scanning processes in one line structure with a laser power of 30 W, spot size of $28.7{\mu}m$, and scan speed of 200 mm/s. With these conditions, a minimum width of about $85.3{\mu}m$ was obtained.

• Journal of Chest Surgery
• /
• v.37 no.4
• /
• pp.307-312
• /
• 2004

With the development of cardiac surgical technique, we need more prosthetic materials for repairing the intra- and extracardiac defects. Although bovine pericardial bioprosthesis treated with glutaraldehyde (GA) solution is one of the most popular materials, it has a drawback of later calcific degeneration. The purpose of this study is to investigate the effectiveness of several materials and methods in reducing the calcific degeneration of bovine pericardium. Material and Method: Forty square-shaped pieces of bovine pericardia were fixed in 0.625% GA solution with 4 g/L MgCl$_2$ㆍ6$H_2O$ as a control group (group 1). Other 40 pieces pre-treated with 1 % SDS(group 2) and 40 pieces post-treated with 8% glutamate (group 3) and 2% chitosan (group 4) were also fixed in the same GA solution. Other 40 pieces pre-treated with 1% SDS and post-treated with 8% glutamate and 40 pieces post-treated with 2% chitosan were also fixed in the same GA solution (group 5, 6). The pericardial pieces were implanted into the belly of 40 Fisher 344 rats subdermally and were extracted 1 month, 2 months, 3 months, and 6 months after the implantation. With an atomic absorption spectrophotometry, we measured the calcium amount deposited and examined the tissue with microscope. Result: The calcium deposition in 1 month was less in group 2, 5, 6 than that in group 1 (p＜0.05). It was most prominent in group 5 (p＜0.01). This finding continued in 2 month. In 3 month, the calcium deposition was less in group 3 and 4 as well as group 2, 5, and 6 than in group 1. In 6 month, the calcium deposition in group 2, 3, 4, 5, and 6 was less than that in group 1 and the difference was more than that of 1, 2, and 6 month. The microscopic calcium deposition was also less in group 2 and 5. Calcium deposition developed in the whole layer of pericardium, beginning with the surrounding the collagen fiber and progressing inwardly. Conclusion: Pre-treatment with SDS, post-treatment with glutamate or chitosan, and SDS pre-treatment and post-treatment with glutamate or chitosan were effective in reducing the calcium deposition in bovine pericardium. Moreover, the combined method of SDS pre-treatment and glutamate post-treatment was more effective than other methods.

• The Journal of Industrial Distribution & Business
• /
• v.2 no.1
• /
• pp.23-28
• /
• 2011

In recent years Mag-Geol-Li is becoming popular again and the consumption layer of Mag-Geol-Li is definitely younger. Nowadays, Mag-Geol-Li is the main traditional alcohol and without consideration of ages and genders whoever can enjoy Mag-Geol-Li. Producers should ensure fair price of goods and improve production facilities to maximize products to meet the needs of consumers who will buy. In the studies I discuss about the ways to improve the distribution of Mag-Geol-Li, the theories about Mag-Geol-Li, Social backgrounds and effects of Mag-Geol-Li why it is becoming popular and improvement of the distribution structure of Mag-Geol-Li and impact of big Mag-Geol-Li company in Mag-Geol-Li industry. Lately, people can enjoy Mag-Geol-Li without burden because of low alcohol. It is gaining a good response by consumers because Mag-Geol-Li contains lactobacillus, yeasts and dietary fiber, also it is well balanced with nutritional aspects. There are not only huge factory to produce Mag-Geol-Li but also most are still cottage industry. Therefore, quality management does not work well because the majority of Mag-Geol-Li is small businesses. In spite of there are a lot of ways to improve the distribution structure and problems of Mag-Geol-Li, but none provide any improvement that make consumer awareness about the main cause of the problem is inaccurate. The ultimate goal of improving the distribution structure of Mag-Geol-Li is activating the market, the improvement of production facilities and safe for consumers with affordable price and good quality product. As mentioned above, to improve and change the logistics systems and hygiene, government support is required and Mag-Geol-Li companies should be recognized the distribution system as a major problem.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2001.11a
• /
• pp.24-39
• /
• 2001

These experiments were conducted to evaluate the nutritional and feeding value of red pepper seed oil meal (RPSOM) as local vegetable protein ingredients for poultry feeding. In the first experiment, nutritional values of RPSOM were evaluated by analyzing chemical compositions and determining true metabolizable energy (TME), nitrogen corrected TME (TMEn) and true available amino acid (TAAA) contents. According to the chemical analysis, RPSOM contained 22.50％ of crude protein, 4.75％ of ether extract, 27.70％ of crude fiber, 0.34 mg／g of capsaicin and 49.97 ppm of xanthophylls. The values of TME and TMEn determined by force-feeding 16 roosters (ISA-Brown) were 1.73 kcal／g and 1.63 kcal／g on dry matter basis, respectively. The average TAAA value of 16 amino acids measured by the force－feeding technique was 81.70％. These values were used for formulating experimental diets containing various levels of RPSOM for broiler chicks and laying hens. Two feeding trials were made to investigate the effects of dietary incorporation of RPSOM into chicken feed performances of broiler chicks and laying hens. In the broiler feeding (Exp. 2), a total of two hundred twenty-five, 4 wk old male broiler chicks (Ross) were randomly divided into 9 groups of 25 birds each and assigned to three experimental diets containing 0, 5 and 10% RPSOM. The birds were fed ad libitum the diets for 3 wk and feed intake, weight gain and feed conversion rate were determined. At the end of the feeding, the blood levels of glutamate oxaloacetate transaminase (GOT), gamma glutamyl transpeptidase (GGT), blood urea nitrogen (BUN) and cholesterol, and the body and fatty acid compositions of leg muscle were measured. No significant differences were observed in weight gain, feed intake, feed conversion rate, body composition, serum levels of GOT, GGT and BUN among the treatments. However, blood cholesterol level was lower (P＜0.05) in 10% RPSOM diet group than those in the other. The dietary RPSOM at 5 and 10% levels increased the content of linoleic acid (P＜0.05) in leg muscle compared to that of control group. The results indicate that RPSOM can be used for broiler feed up to 10% without any significant negative effects on broiler performance. In the layer feeding (Exp. 3), the effects of dietary RPSOM on the performances of laying hen were investigated by feeding ninety 45 wk old laying hens (ISA-Brown) with experimental diets containing 0, 5 and 10% RPSOM for 4 wk (30 birds per treatment). Measurements were made on egg production rate, egg weight, feed intake, Haugh unit, egg shell strength which was higher (P＜0.05) in layers fed 10% RPSOM diet compared to those fed 0 and 5% RPSOM diets. Thus, it can be concluded that RPSOM can be included into laying hen feed up to 10% without any harmful effects.

• Applied Biological Chemistry
• /
• v.43 no.1
• /
• pp.24-28
• /
• 2000

This study was conducted to evaluate the effect of ultrafiltration (UF) process variables on permeate flux and membrane resistance and to clarify apple vinegar for quality improvement. Apple vinegar was clarified in a laboratory ultrafiltration system with hollow fiber membrane made of polysulfone and MWCO 30,000 and 10,000. The permeate flux increased with the increase of flow rate and the optimum pressure was $1.5\;kgf/cm^2$ in this system. The turbidity of clarified apple vinegar treated UF largely decreased. pH and acidity of treated samples showed the same level as those of untreated apple vinegar. The permeate flux continuously declined while the fouling material accumulated on the membrane as the operation time increased. Resistance decreased with lower pressure, which could be explained by expansion of pore size at lower pressure and minor compaction of the polarized layer at lower pressure.